RELENG_8 on AMX FX 8150?

Thu Nov 10 07:16:32 UTC 2011

Never mind, mostly. It is obvious -- duh. Nonetheless, anyone using this 
CPU? I'm curious what you think.

On Thu, 10 Nov 2011, Dennis Glatting wrote:

>
> Does anyone know if this works? I have had one kernel trap and a make 
> buildworld fails with this:
>
> cc -O2 -pipe -I. -I/usr/src/lib/libdwarf 
> -I/usr/obj/usr/src/tmp/legacy/usr/include -c 
> /usr/src/lib/libdwarf/dwarf_errmsg.c
> cc: Internal error: Illegal instruction: 4 (program cc1)
> Please submit a full bug report.
> See <URL:http://gcc.gnu.org/bugs.html> for instructions.
>
>
> I also have an error when trying to build gettext-0.18.1.1.tar.gz. It could 
> be I have something corrupt, a bad disk, or whatever but it isn't obvious and 
> I'm wondering whether anyone is working with that CPU.
>
>
> bd1# dmesg
> Copyright (c) 1992-2011 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 8.2-STABLE #0: Fri Oct 28 22:47:38 PDT 2011
>    root@:/usr/src/sys/amd64/compile/WORKHORSE amd64
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD FX(tm)-8150 Eight-Core Processor            (3616.17-MHz K8-class 
> CPU)
>  Origin = "AuthenticAMD"  Id = 0x600f12  Family = 15  Model = 1  Stepping = 
> 2
>
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>
> Features2=0x1698220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,AVX>
>  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
>  AMD 
> Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,<b23>,<b24>>
>  TSC: P-state invariant
> real memory  = 12884901888 (12288 MB)
> avail memory = 12385927168 (11812 MB)
> ACPI APIC Table: <GBT    GBTUACPI>
> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
> FreeBSD/SMP: 1 package(s) x 8 core(s)
> cpu0 (BSP): APIC ID:  0
> cpu1 (AP): APIC ID:  1
> cpu2 (AP): APIC ID:  2
> cpu3 (AP): APIC ID:  3
> cpu4 (AP): APIC ID:  4
> cpu5 (AP): APIC ID:  5
> cpu6 (AP): APIC ID:  6
> cpu7 (AP): APIC ID:  7
> ioapic0: Changing APIC ID to 8
> ioapic0 <Version 2.1> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> acpi0: <GBT GBTUACPI> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, cfca0000 (3) failed
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> cpu2: <ACPI CPU> on acpi0
> cpu3: <ACPI CPU> on acpi0
> cpu4: <ACPI CPU> on acpi0
> cpu5: <ACPI CPU> on acpi0
> cpu6: <ACPI CPU> on acpi0
> cpu7: <ACPI CPU> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 19 at device 3.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> mps0: <LSI SAS2008> port 0xee00-0xeeff mem 
> 0xfddfc000-0xfddfffff,0xfdd80000-0xfddbffff irq 19 at device 0.0 on pci1
> mps0: Firmware: 07.00.00.00
> mps0: IOCCapabilities: 
> 185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR>
> mps0: [ITHREAD]
> pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xdf00-0xdf1f mem 
> 0xfdbc0000-0xfdbdffff,0xfdb00000-0xfdb7ffff,0xfdbfc000-0xfdbfffff irq 16 at 
> device 0.0 on pci2
> em0: Using MSIX interrupts with 3 vectors
> em0: [ITHREAD]
> em0: [ITHREAD]
> em0: [ITHREAD]
> em0: Ethernet address: 00:1b:21:c5:f0:6c
> pcib3: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> pci3: <serial bus, USB> at device 0.0 (no driver attached)
> pcib4: <ACPI PCI-PCI bridge> irq 16 at device 12.0 on pci0
> pci4: <ACPI PCI bus> on pcib4
> mps1: <LSI SAS2008> port 0xbe00-0xbeff mem 
> 0xfd1fc000-0xfd1fffff,0xfd180000-0xfd1bffff irq 16 at device 0.0 on pci4
> mps1: Firmware: 10.00.02.00
> mps1: IOCCapabilities: 
> 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
> mps1: [ITHREAD]
> pcib5: <ACPI PCI-PCI bridge> irq 17 at device 13.0 on pci0
> pci5: <ACPI PCI bus> on pcib5
> vgapci0: <VGA-compatible display> port 0xae00-0xaeff mem 
> 0xd0000000-0xdfffffff,0xfdec0000-0xfdedffff irq 17 at device 0.0 on pci5
> pci5: <multimedia, HDA> at device 0.1 (no driver attached)
> atapci0: <ATI IXP700/800 SATA300 controller> port 
> 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 
> 0xfdfff000-0xfdfff3ff irq 19 at device 17.0 on pci0
> atapci0: [ITHREAD]
> atapci0: AHCI v1.20 controller with 6 6Gbps ports, PM supported
> ata2: <ATA channel 0> on atapci0
> ata2: [ITHREAD]
> ata3: <ATA channel 1> on atapci0
> ata3: [ITHREAD]
> ata4: <ATA channel 2> on atapci0
> ata4: [ITHREAD]
> ata5: <ATA channel 3> on atapci0
> ata5: [ITHREAD]
> ata6: <ATA channel 4> on atapci0
> ata6: [ITHREAD]
> ata7: <ATA channel 5> on atapci0
> ata7: [ITHREAD]
> ohci0: <OHCI (generic) USB controller> mem 0xfdffe000-0xfdffefff irq 18 at 
> device 18.0 on pci0
> ohci0: [ITHREAD]
> usbus0: <OHCI (generic) USB controller> on ohci0
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfdffd000-0xfdffd0ff irq 17 
> at device 18.2 on pci0
> ehci0: [ITHREAD]
> usbus1: EHCI version 1.0
> usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
> ohci1: <OHCI (generic) USB controller> mem 0xfdffc000-0xfdffcfff irq 18 at 
> device 19.0 on pci0
> ohci1: [ITHREAD]
> usbus2: <OHCI (generic) USB controller> on ohci1
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfdffb000-0xfdffb0ff irq 17 
> at device 19.2 on pci0
> ehci1: [ITHREAD]
> usbus3: EHCI version 1.0
> usbus3: <EHCI (generic) USB 2.0 controller> on ehci1
> pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 20.3 on pci0
> isa0: <ISA bus> on isab0
> pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
> pci6: <ACPI PCI bus> on pcib6
> ohci2: <OHCI (generic) USB controller> mem 0xfdffa000-0xfdffafff irq 18 at 
> device 20.5 on pci0
> ohci2: [ITHREAD]
> usbus4: <OHCI (generic) USB controller> on ohci2
> pcib7: <ACPI PCI-PCI bridge> at device 21.0 on pci0
> pci7: <ACPI PCI bus> on pcib7
> re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 
> 0x8e00-0x8eff mem 0xfd4ff000-0xfd4fffff,0xfd4f8000-0xfd4fbfff irq 17 at 
> device 0.0 on pci7
> re0: Using 1 MSI-X message
> re0: Chip rev. 0x2c800000
> re0: MAC rev. 0x00000000
> miibus0: <MII bus> on re0
> rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
> rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 
> 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 
> 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 
> 1000baseT-FDX-flow-master, auto, auto-flow
> re0: Ethernet address: 50:e5:49:45:54:46
> re0: [ITHREAD]
> pcib8: <ACPI PCI-PCI bridge> at device 21.1 on pci0
> pci8: <ACPI PCI bus> on pcib8
> pci8: <serial bus, USB> at device 0.0 (no driver attached)
> ohci3: <OHCI (generic) USB controller> mem 0xfdff9000-0xfdff9fff irq 18 at 
> device 22.0 on pci0
> ohci3: [ITHREAD]
> usbus5: <OHCI (generic) USB controller> on ohci3
> ehci2: <EHCI (generic) USB 2.0 controller> mem 0xfdff8000-0xfdff80ff irq 17 
> at device 22.2 on pci0
> ehci2: [ITHREAD]
> usbus6: EHCI version 1.0
> usbus6: <EHCI (generic) USB 2.0 controller> on ehci2
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 
> on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 900
> atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
> orm0: <ISA Option ROMs> at iomem 
> 0xc0000-0xcffff,0xd0000-0xd4fff,0xdb000-0xdbfff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> ppc0: cannot reserve I/O port range
> hwpstate0: <Cool`n'Quiet 2.0> on cpu0
> Timecounters tick every 1.000 msec
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 480Mbps High Speed USB v2.0
> usbus2: 12Mbps Full Speed USB v1.0
> usbus3: 480Mbps High Speed USB v2.0
> usbus4: 12Mbps Full Speed USB v1.0
> usbus5: 12Mbps Full Speed USB v1.0
> usbus6: 480Mbps High Speed USB v2.0
> ugen0.1: <ATI> at usbus0
> uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> ugen1.1: <ATI> at usbus1
> uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
> ugen2.1: <ATI> at usbus2
> uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> ugen3.1: <ATI> at usbus3
> uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
> ugen4.1: <ATI> at usbus4
> uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> ugen5.1: <ATI> at usbus5
> uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
> ugen6.1: <ATI> at usbus6
> uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
> uhub4: 2 ports with 2 removable, self powered
> uhub5: 4 ports with 4 removable, self powered
> uhub0: 5 ports with 5 removable, self powered
> uhub2: 5 ports with 5 removable, self powered
> uhub6: 4 ports with 4 removable, self powered
> uhub1: 5 ports with 5 removable, self powered
> uhub3: 5 ports with 5 removable, self powered
> ugen0.2: <BTC> at usbus0
> ukbd0: <BTC USB Multimedia Keyboard, class 0/0, rev 1.10/1.00, addr 2> on 
> usbus0
> kbd2 at ukbd0
> uhid0: <BTC USB Multimedia Keyboard, class 0/0, rev 1.10/1.00, addr 2> on 
> usbus0
> da0 at mps1 bus 0 scbus1 target 0 lun 0
> da0: <ATA ST380815AS B> Fixed Direct Access SCSI-6 device
> da0: 300.000MB/s transfers
> da0: Command Queueing enabled
> da0: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C)
> da1 at mps1 bus 0 scbus1 target 1 lun 0
> da1: <ATA ST31000333AS SD35> Fixed Direct Access SCSI-6 device
> da1: 300.000MB/s transfers
> da1: Command Queueing enabled
> da1: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
> SMP: AP CPU #4 Launched!
> SMP: AP CPU #7 Launched!
> SMP: AP CPU #5 Launched!
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #3 Launched!
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #6 Launched!
> Trying to mount root from ufs:/dev/da0s1a
> WARNING: / was not properly dismounted
> /: mount pending error: blocks 6312 files 674
> ZFS filesystem version 5
> ZFS storage pool version 28
> pid 7360 (cc1), uid 0: exited on signal 4 (core dumped)
>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
>