fxp0 problem with 6Beta?

Bdrawyah bdrawyah at bdrawyah.plus.com
Wed Oct 5 13:09:55 PDT 2005


I have a small LAN at home consisting of 192.168.0.5 (a single PIII) which runs 5.4 stable and 192.168.
0.7 (a dual PIII) which runs 6Beta4 connected with a Netgear router at 192.168.0.1.
192.168.0.7 has nothing on it, no firewall even, aside from 6Beta (with debugging turned off in the 
kernel) and cvsup.
>From 192.168.0.7 I can find and login to 192.168.0.5 and external computers using ssh.
>From 192.168.0.5 I can login to external computers using ssh but there is no sign of 192.168.0.7, 
pinging fails and the Netgear router can't see it.
Any suggestions?

Below is dmesg for 192.168.0.7
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA4 #0: Sun Sep 11 16:48:29 BST 2005
    root at box7.bruce.net:/usr/obj/usr/src/sys/BOX7BRUCE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (731.02-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,
FXSR,SSE>
real memory  = 536870912 (512 MB)
avail memory = 515887104 (491 MB)
MPTable: <COMPAQ   Workstation >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  1
 cpu1 (AP): APIC ID:  0
ioapic0: Changing APIC ID to 8
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
cpu1 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82840 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x5400-0x543f mem 0xfdc00000-0xfdc00fff,0xfdd00000-0xfd
dfffff irq 18 at device 2.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:a5:53:cb:3f
ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0x5000-0x50ff mem 0xfde00000-0xfde00fff irq 19
 at device 7.0 on pci2
ahc0: [GIANT-LOCKED]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
pci2: <display, VGA> at device 11.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH UDMA66 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6460-0x646f at 
device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82801AA (ICH) USB controller> port 0x6440-0x645f irq 19 at device 31.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xe0000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/13 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
Timecounters tick every 1.000 msec
acd0: CDROM <Compaq CRD-8402B/1.01> at ata0-master PIO4
Waiting 5 seconds for SCSI devices to settle
da0 at ahc0 bus 0 target 0 lun 0
da0: <COMPAQ BD00975CC6 HPB6> Fixed Direct Access SCSI-3 device 
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da0: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/da0s1a




More information about the freebsd-questions mailing list