burncd problem err=16 any ideas?

[Subhro]

Are you running the GENERIC kernel? If not have you included support
for the CD file system? Also did you put something non standard in
/etc/make.conf?

Regards
S.

On Mon, 30 Aug 2004 15:56:54 -0500, michael <cripticcorp at cripticcorp.net> wrote:
> Im running freebsd 4.10 with a sony cd/dvd burner combo (DRU-530A) im
> using burncd -f /dev/acd0c -s max -e data imagefile.iso fixate , i have
> tried to lower the speed to 1x and 8x and i get the same problem  ill
> include the error with -v verabos output maybe it will help ( does
> burncd log somewhere there might be more about the error message that
> might help this problem out? )
> 
> adding type 0x08 file permfiles.iso size 8992 KB 4496 blocks
> next writeable LBA 0
> addr = 0 size = 9207808 blocks = 4496
> writing from file permfiles.iso size 8992 KB
> written this track 1056 KB (11%) total 1056 KB
> only wrote -1 of 32768 bytes err=16
> 
> fixating CD, please wait..
> 
> I have also tried to cat imagefile.iso > /dev/acd0c so i could then just
> fixate with burncd but i get this error
> 
> cat: stdout: Input/output error
> 
> i looked in my /var/log/messages and found this it might help you guys out
> 
> Aug 30 15:20:49 cripticcorp /kernel: acd0: READ_TRACK_INFO - ILLEGAL
> REQUEST asc=0x24 ascq=0x00 error=0x04
> 
> Aug 30 15:21:06 cripticcorp /kernel: acd0: WRITE_BIG - ILLEGAL REQUEST
> asc=0x30 ascq=0x05 error=0x04
> 
> Aug 30 15:22:05 cripticcorp /kernel: acd0: WRITE_BIG - ILLEGAL REQUEST
> asc=0x21 ascq=0x00 error=0x04
> 
> Aug 30 15:23:07 cripticcorp /kernel: acd0: SEND_OPC_INFO command timeout
> - resetting
> 
> Aug 30 15:23:07 cripticcorp /kernel: ata1: resetting devices .. done
> 
> Aug 30 15:23:37 cripticcorp /kernel: acd0: READ_TRACK_INFO command
> timeout - resetting
> 
> Aug 30 15:23:37 cripticcorp /kernel: ata1: resetting devices .. done
> 
> Aug 30 15:23:37 cripticcorp /kernel: acd0: READ_TRACK_INFO - ILLEGAL
> REQUEST asc=0x20 ascq=0x00 error=0x04
> 
> Aug 30 15:26:52 cripticcorp /kernel: acd0: REZERO command timeout -
> resetting
> 
> Aug 30 15:26:52 cripticcorp /kernel: ata1: resetting devices .. done
> 
> Aug 30 15:27:23 cripticcorp /kernel: acd0: SEND_OPC_INFO command timeout
> - resetting
> 
> Aug 30 15:27:23 cripticcorp /kernel: ata1: resetting devices .. done
> 
> Aug 30 15:27:53 cripticcorp /kernel: acd0: READ_TRACK_INFO command
> timeout - resetting
> 
> Aug 30 15:27:53 cripticcorp /kernel: ata1: resetting devices .. done
> 
> Aug 30 15:27:53 cripticcorp /kernel: acd0: READ_TRACK_INFO - ILLEGAL
> REQUEST asc=0x20 ascq=0x00 error=0x04
> 
> Also one last thing in my /dev i have a acd0c and acd0a is this Cd and DVD ?
> 
> Any ideas would be helpful.
> 
> Michael W.
> criptic at cripticcorp.net
> 
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
> 


-- 
Subhro Sankha Kar
School of Information Technology
Block AQ-13/1 Sector V
ZIP 700091
India