QuakeForge glx and sgl binaries fail on Radeon DRI

[kitsune]

Well if you compiled it with WITH_OPTIMIZED_CFLAGS, I would check and see if
works with out it.

On Mon, 08 Dec 2003 21:19:46 -0600
Reid Linnemann <lreid at okstate.edu> wrote:

> I'm attempting to get nq-glx or nq-sgl (I don't know what their differences
> are) to run on a FreeBSD4.9-STABLE box using a Radeon 7200 chip.
> 
> I've got my X Server configured correctly, DRI is functioning, glxgears makes
> an indirect GLX context just fine, etc.. QuakeForge is able to get the context
> and init the window, but then it just Does Not Like things. Here is the
> console output from nq-sgl:
> 
> ~>nq-sgl
> Host_Init
> Added packfile /usr/local/share/quakeforge/id1/pak0.pak (339 files)
> UDP (IPv4) Initialized
> 16.0 megabyte heap
> libGL-DEBUG: vis=35,doublebuf=0,depth=16, rgba=1
> libGL-DEBUG: vis=36,doublebuf=0,depth=16, rgba=1
> libGL-DEBUG: vis=37,doublebuf=0,depth=16, rgba=1
> libGL-DEBUG: vis=38,doublebuf=0,depth=16, rgba=1
> libGL-DEBUG: vis=39,doublebuf=1,depth=16, rgba=1
> libGL-DEBUG: vis=40,doublebuf=1,depth=16, rgba=1
> libGL-DEBUG: vis=41,doublebuf=1,depth=16, rgba=1
> libGL-DEBUG: vis=42,doublebuf=1,depth=16, rgba=1
> libGL-DEBUG: vis=43,doublebuf=0,depth=16, rgba=1
> libGL-DEBUG: vis=44,doublebuf=0,depth=16, rgba=1
> libGL-DEBUG: vis=45,doublebuf=0,depth=16, rgba=1
> libGL-DEBUG: vis=46,doublebuf=0,depth=16, rgba=1
> libGL-DEBUG: vis=47,doublebuf=1,depth=16, rgba=1
> libGL-DEBUG: vis=48,doublebuf=1,depth=16, rgba=1
> libGL-DEBUG: vis=49,doublebuf=1,depth=16, rgba=1
> libGL-DEBUG: vis=50,doublebuf=1,depth=16, rgba=1
> @@Created GLX Context..
> GL_VERSION: 1.3 Mesa 4.0.4
> GL_VENDOR: Mesa project: www.mesa3d.org
> GL_RENDERER: Mesa GLX Indirect
> GL_EXTENSIONS: 
> Checking for multitexture: not found.
> Checking for 8-bit extension: disabled.
> Video mode 640x480 initialized.
> Particles: 3000 maximum vertex elements.
> Sprites: 4 maximum vertex elements.
> Text: 3000 maximum vertex elements.
> 
> Sound Initialization
> Not loading CD due to no driver
> JOY: Joystick not found.
> X Error of failed request:  GLXBadRenderRequest
>   Major opcode of failed request:  157 (GLX)
>   Minor opcode of failed request:  1 (X_GLXRender)
>   Serial number of failed request:  91
>   Current serial number in output stream:  100
> 
> Now nq-glx does the same thing, only it caps cpu usage after checking off 3000
> max vertex elements for particles, and appears to do nothing. It will
> eventually spit out the next two lines of output, and then death becomes her.
> 
> For reference, here is dmesg - and I am attaching the XF86Config.
> 
> Timecounter "i8254"  frequency 1193182 Hz
> CPU: AMD Athlon(tm) Processor (800.03-MHz 686-class CPU)
>   Origin = "AuthenticAMD"  Id = 0x622  Stepping = 2
>  
> Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,P
> AT,PSE36,MMX,FXSR>
>   AMD Features=0xc0400000<AMIE,DSP,3DNow!>
> real memory  = 268419072 (262128K bytes)
> avail memory = 256282624 (250276K bytes)
> Preloaded elf kernel "kernel" at 0xc04f4000.
> Preloaded elf module "splash_pcx.ko" at 0xc04f409c.
> Preloaded elf module "vesa.ko" at 0xc04f4140.
> Preloaded splash_image_data "/boot/hautlos.pcx" at 0xc04f41dc.
> Preloaded elf module "linux.ko" at 0xc04f422c.
> VESA: v2.0, 65536k memory, flags:0x1, mode table:0xc04d2282 (1000022)
> VESA: ATI RAGE128
> Pentium Pro MTRR support enabled
> md0: Malloc disk
> Using $PIR table, 8 entries at 0xc00f0ea0
> apm0: <APM BIOS> on motherboard
> apm0: found APM BIOS v1.2, connected at v1.2
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xe0000000-0xe7ffffff
> at device 0.0 on pci0
> pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on
> pci0 pci1: <PCI bus> on pcib2
> drm0: <ATI Radeon QD R100> port 0xd800-0xd8ff mem
> 0xd7000000-0xd707ffff,0xd8000000-0xdfffffff irq 11 at device 0.0 on pci1
> info: [drm] AGP at 0xe0000000 128MB
> info: [drm] Initialized radeon 1.8.0 20020828 on minor 0
> isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <VIA 82C686 ATA66 controller> port 0xb800-0xb80f at device 4.1 on
> pci0 ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 9 at device 4.2 on
> pci0 usb0: <VIA 83C572 USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 9 at device 4.3 on
> pci0 usb1: <VIA 83C572 USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 4.4
> pcm0: <AudioPCI ES1370> port 0x9400-0x943f irq 5 at device 10.0 on pci0
> rl0: <RealTek 8139 10/100BaseTX> port 0x9000-0x90ff mem 0xd6800000-0xd68000ff
> irq 10 at device 11.0 on pci0
> rl0: Ethernet address: 00:e0:7d:e2:df:03
> miibus0: <MII bus> on rl0
> rlphy0: <RealTek internal media interface> on miibus0
> rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> rl1: <RealTek 8139 10/100BaseTX> port 0x8800-0x88ff mem 0xd6000000-0xd60000ff
> irq 11 at device 12.0 on pci0
> rl1: Ethernet address: 00:e0:7d:e3:2c:74
> miibus1: <MII bus> on rl1
> rlphy1: <RealTek internal media interface> on miibus1
> rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> ahc0: <Adaptec 2930CU SCSI adapter> port 0x8400-0x84ff mem
> 0xd5800000-0xd5800fff irq 9 at device 13.0 on pci0
> aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
> pcib1: <Host to PCI bridge> on motherboard
> pci2: <PCI bus> on pcib1
> orm0: <Option ROMs> at iomem 0xc0000-0xcafff,0xcc000-0xd07ff on isa0
> pmtimer0 on isa0
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model IntelliMouse, device ID 3
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> ppc0: <Parallel port> at port 0x378-0x37f on isa0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> ppbus0: IEEE1284 device found /NIBBLE
> Probing for PnP devices on ppbus0:
> ppbus0: <Hewlett-Packard HP LaserJet 4P> HP ENHANCED PCL5,PJL
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Polled port
> ppi0: <Parallel I/O> on ppbus0
> pca0 at port 0x40 on isa0
> IP packet filtering initialized, divert enabled, rule-based forwarding
> enabled, default to accept, logging disabled
> IPsec: Initialized Security Association Processing.
> ad0: 10300MB <FUJITSU MPD3108AT> [20928/16/63] at ata0-master UDMA33
> acd0: CDROM <LTN242> at ata1-master PIO4
> Waiting 15 seconds for SCSI devices to settle
> Mounting root from ufs:/dev/ad0s1a
> da1 at ahc0 bus 0 target 1 lun 0
> da1: <QUANTUM TRB730S 043C> Fixed Direct Access SCSI-2 device 
> da1: 10.000MB/s transfers (10.000MHz, offset 8)
> da1: 699MB (1431760 512 byte sectors: 64H 32S/T 699C)
> da0 at ahc0 bus 0 target 0 lun 0
> da0: <COMPAQ ST32171N 0388> Fixed Direct Access SCSI-2 device 
> da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
> da0: 2006MB (4110000 512 byte sectors: 255H 63S/T 255C)
>