uath under FreeBSD 8.0-STABLE

[Weongyo Jeong]

On Wed, Jan 06, 2010 at 12:44:46PM -0500, Steven Friedrich wrote:
> On Monday 04 January 2010 05:31:18 pm Weongyo Jeong wrote:
> > On Mon, Jan 04, 2010 at 03:57:56PM -0500, Steven Friedrich wrote:
> > > On Monday 04 January 2010 03:34:41 pm Weongyo Jeong wrote:
> > > > Could you please test with attached patch?  Today the device I ordered
> > > > is delivered and I tried to test with it.  One thing, it looks weird,
> > > > I noticed is that after uploading the firmware, idProduct is increased
> > > > not decreased.
> > > >
> > > > After patching, you should rebuild the module.
> > >
> > > I didn't get an attachment...
> > 
> > Attached.
> > 
> > regards,
> > Weongyo Jeong
> > 
> 
> I had to place:
> # Firmware download for Netgear WG111T USB ethernet.
> attach 100 {
> 	match "vendor"	"0x1385";
> 	match "product"	"0x4251";
> 	action "/usr/sbin/uathload -d /dev/$device-name";
> };
> 
> in /etc/devd.conf, but I later moved it to /usr/local/etc/devd/WG111T.conf
> 
> Then it appeared in the ifconfig as uath0.
> 
> But I get errors later when I run wpa_supplicant -B -i wlan0 -c 
> /etc/wpa_supplicant.conf
> 
> Those errors are:
> uath0: timeout waiting for reply to cmd 0x8 (8)
> uath0: could not start target, error 35
> 
> Your patch DOES work, AFAIK.

I tested WPA test with my device today and  it worked.  Could you please
show me your wpa_supplicant.conf and commands?  The following is my
configuration and command.

    # cat /etc/wpa_supplicant.conf 
    ctrl_interface=/var/run/wpa_supplicant
    ctrl_interface_group=wheel

    network={
	ssid="wg"
	bssid=00:08:XX:XX:XX:15
	proto=WPA
	key_mgmt=WPA-PSK
	pairwise=TKIP
	group=TKIP
	scan_ssid=1
	psk="XXXXXXXXXX"
    }

    # uathload -d /dev/ugen1.2
    ugen1.2: <Atheros Communications Inc> at usbus1 (disconnected)
    ugen1.2: <Athero Communications Inc> at usbus1
    uath0: <Atheros Communications Inc WG111T, rev 2.00/0.01, addr 2> on
    usbus1
    # ifconfig wlan0 create wlandev uath0                    
    wlan0: Ethernet address: 00:1b:2f:XX:XX:ca
    <s/modules/usb/uath]# wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf    
    CTRL-EVENT-SCAN-RESULTS 
    Trying to associate with 00:08:XX:XX:XX:14 (SSID='wg' freq=2437 MHz)
    Associated with 00:08:XX:XX:XX:14
    WPA: Key negotiation completed with 00:08:XX:XX:XX:14 [PTK=TKIP
    GTK=TKIP]
    CTRL-EVENT-CONNECTED - Connection to 00:08:XX:XX:XX:14 completed (auth)
    [id=0 id_str=]

regards,
Weongyo Jeong