SMC9452TX (Marvell chipset) supported?

[veedee at c7.campus.utcluj.ro]

On Wed, Nov 12, 2003 at 05:13:39PM -0500, Jung-uk Kim wrote:
> On Wednesday 12 November 2003 04:56 pm, veedee at c7.campus.utcluj.ro 
> wrote:
> > On Wed, Nov 12, 2003 at 04:23:30PM -0500, Jung-uk Kim wrote:
> > > On Wednesday 12 November 2003 04:11 pm, Jung-uk Kim wrote:
> > > > > pci0: <unknown card> (vendor=0x11ab, dev=0x4320) at 9.0 irq
> > > > > 12
> > > >
> > > > Use 'sk' driver.
> > >
> > > I am sorry that I made too quick conclusion.  This one seems to
> > > use Marvell's vendor ID.  Try the attached patch.
> >
> > No problem. Thanks for the patch. It seems to work now!
> > skc0: <Marvell Gigabit Ethernet> port 0xd000-0xd0ff mem
> > 0xe9500000-0xe9503fff irq 12 at device 9.0 o n pci0
> > skc0: SMC EZ Card 1000 (SMC9452TX V.2)
> > sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
> > sk0: Ethernet address: 00:04:e2:9a:46:9c
> > miibus0: <MII bus> on sk0
> > e1000phy0: <Marvell Semiconductor 88E1000* gigabit PHY> on miibus0
> > e1000phy0:  1000baseTX-FDX, 100baseTX-FDX, 100baseTX, 10baseTX-FDX,
> > 10baseTX, auto
> 
> I am glad that it worked.
> 
> > Any ideas if sk will support polling anytime soon?
> 
> I saw a patch was floating around in the mailing list long time ago 
> but I cannot find it any more.  If it is really important for you, it 
> shouldn't be hard to implement it.

Sure it is. Less CPU usage with polling on high "traffic". Ok, I'll try to
search for it. If you find the patch by mistake, please let me know. Thanks.
 
> 
> JK
> 

-- 
| Radu Bogdan 'veedee' Rusu
| NetSysAdm at campus dot utcluj dot ro
| Personal gallery at http://rrb.so.ro/gallery/
| ...mirroring FreeBSD and coffee