SMC9452TX (Marvell chipset) supported?

[Jung-uk Kim]

On Wednesday 12 November 2003 04:56 pm, veedee at c7.campus.utcluj.ro 
wrote:
> On Wed, Nov 12, 2003 at 04:23:30PM -0500, Jung-uk Kim wrote:
> > On Wednesday 12 November 2003 04:11 pm, Jung-uk Kim wrote:
> > > > pci0: <unknown card> (vendor=0x11ab, dev=0x4320) at 9.0 irq
> > > > 12
> > >
> > > Use 'sk' driver.
> >
> > I am sorry that I made too quick conclusion.  This one seems to
> > use Marvell's vendor ID.  Try the attached patch.
>
> No problem. Thanks for the patch. It seems to work now!
> skc0: <Marvell Gigabit Ethernet> port 0xd000-0xd0ff mem
> 0xe9500000-0xe9503fff irq 12 at device 9.0 o n pci0
> skc0: SMC EZ Card 1000 (SMC9452TX V.2)
> sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
> sk0: Ethernet address: 00:04:e2:9a:46:9c
> miibus0: <MII bus> on sk0
> e1000phy0: <Marvell Semiconductor 88E1000* gigabit PHY> on miibus0
> e1000phy0:  1000baseTX-FDX, 100baseTX-FDX, 100baseTX, 10baseTX-FDX,
> 10baseTX, auto

I am glad that it worked.

> Any ideas if sk will support polling anytime soon?

I saw a patch was floating around in the mailing list long time ago 
but I cannot find it any more.  If it is really important for you, it 
shouldn't be hard to implement it.

> > Thanks,
> >
> > JK
>
> Thanks for the quick reply.

No problem.

JK