LIRC guide for FreeBSD

[Anton Stamenov]

This is how I start lircd serever

lircd -H pinsys -d /dev/cuad0 -p 644

I compile it with pinsys support (this is my remote), not with irman
(as in ports).

When started it will create the sockets. lirc need the same stuff as
in linux, except that not all drivers that are supported under linux
are ported in freebsd. 

On Wed, 14 Mar 2007, Joe Auty wrote:
> Greg 'groggy' Lehey wrote:
> > On Tuesday, 13 March 2007 at 23:56:23 -0400, Joe Auty wrote:
> >> Does anybody know of a good resource for setting up my IR Blaster
> >> within FreeBSD?
> > 
> > Not I.  Are you sure it's supported?  Currently very few remote
> > controls are.
> > 
> 
> Well, I have no idea about the FreeBSD end of things, but I do have a
> good lircd.conf for my satellite box. Others have gotten it to work,
> I've confirmed this. The only thing I'm not sure of is the extent of the
> FreeBSD support and how FBSD factors into this mix?
> 
> 
> >> I think I have a good lircd.conf with information about my remote,
> >> but I'm sure I'm missing some information about how to get the
> >> kernel modules I'll need to generate my /dev/lirc0.
> > 
> > Are you sure you need a /dev/lirc0?  I'm running lircd with a DVICO
> > USB remote control on one of my machines, and there's no /dev/lirc0
> > there.  If you do need it, you'll probably have to port the kernel
> > modules.  What kind of interface does it have?
> > 
> 
> I tried using /dev/ttyd0 since it just plugs into a serial port (I
> bought one of of http://irblaster.info). I can do a:
> 
> # lircd -n --device=/dev/ttyd0 /usr/local/etc/lircd.conf
> lircd: lircd(dvico) ready
> 
> Does this confirm anything of value?
> 
> 
> >> Perhaps this might be a better question for a different FreeBSD
> >> list?  Just thinking about you guys since many seem to know the
> >> score in getting MythTV setups to work...
> > 
> > The list is probably right.  And I'm making progress with my
> > "installing MythTV on FreeBSD" documentation at
> > http://www.lemis.com/grog/HOWTO/mythtv-on-FreeBSD-setup.html This is
> > still pretty rough about the edges; I'll work on it when I'm sure I
> > know what I'm doing.
> > 
> 
> Cool! Would you like some suggestions for your guide?
> 
> 
> 
> > Greg
> > --
> > See complete headers for address and phone numbers.

-- 
___________
anton