PRO/Wireless 3945ABG (Device not configured)

[Torfinn Ingolfsen]

On Sun, 23 Jul 2006 08:49:41 -0400 (EDT)
Daniel Eischen <deischen at freebsd.org> wrote:

> Sorry, I don't run 6.x, so I can't help.  Everything works fine
> on -current.  If you're not at 6-stable, I'd try that.

I installed -current from the Julysnapshot on the last free
slice in the machine:
FreeBSD kg-home.kg4.no 7.0-CURRENT-200607 FreeBSD 7.0-CURRENT-200607 #0: Fri Jul  7 23:24:18 UTC 2006     root at almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386

And then I tried the driver again. Note: this is with acpi enabled,
because for some reason the machine hangs if I try to boot -current with acpi disabled
(see another thread in this mailing list).

after
kldload firmware
kldload wpi_ucode
kldload if_wpi

I get the following in /var/log/messages:
Aug  4 16:11:02 kg-home kernel: wpi0: <Intel(R) PRO/Wireless 3945ABG> irq 17 at device 0.0 on pci3
Aug  4 16:11:02 kg-home kernel: wpi0: 0x1000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).
Aug  4 16:11:02 kg-home kernel: wpi0: could not allocate memory resource
Aug  4 16:11:02 kg-home kernel: device_attach: wpi0 attach returned 12
Aug  4 16:11:02 kg-home kernel: bge0: <Broadcom BCM5750 C1, ASIC rev. 0x4201> irq 18 at device 0.0 on pci4
Aug  4 16:11:02 kg-home kernel: bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).
Aug  4 16:11:02 kg-home kernel: bge0: couldn't map memory
Aug  4 16:11:02 kg-home kernel: device_attach: bge0 attach returned 6


I suspect it is because of the broken ACPI / dsdt on this laptop, and would love to try it with acpi disabled.
Any hints on making -current boot with acpi disabled on this laptop?
-- 
Regards,
Torfinn Ingolfsen,
Norway