fsck

[Tim McCullagh]

Hi Kurt

Thanks for the response.

I have run the fsck /dev/da1s1f and waited over an hour.  When I do a ctrl
+t  it gets to somewhere between 1440K and 2880K of a 16GB partition and
seems to just stop.

Is it possible that because the partition was mounted as /var on /dev/da0s1f
on the original machine and when fsck reads it it wants to mount it as /var,
but is not able to because on the new host machine on which it is mounted as
/dev/da1s1f that the new host machine has a /var on /dev/da0s1f.   Would
this have any affect at all?

Regards

Tim

----- Original Message -----
From: "Kurt Jaeger" <lists at complx.LF.net>
To: "Tim McCullagh" <timbo at halenet.com.au>
Cc: "Putinas Piliponis" <putinas.piliponis at icnspot.net>;
<freebsd-isp at FreeBSD.ORG>
Sent: Wednesday, January 21, 2004 4:30 AM
Subject: Re: fsck


> Hi!
>
> > Message from syslogd at cathy at Tue Jan 20 22:05:56 2004 ...
> > cathy /kernel: <<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
> >
> > Then It freezes or continues to give
> > cathy /kernel: <<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
> > errors
> >
> > Should I just leave it and wait?
>
> Yes, try to wait a while (10 minutes?). I've seen these messages
> as well, and as of know they seem harmless and do not stop the
> system.
>
> But: Your system may vary...
>
> --
> MfG/Best regards, Kurt Jaeger                                  16 years to
go !
> LF.net GmbH        fon +49 711 90074-23  pi at LF.net
> Ruppmannstr. 27    fax +49 711 90074-33
> D-70565 Stuttgart  mob +49 171 3101372
>