Install problem HP integrity rx2660(Montecito)
Richard Walter
Richard.Walter at hob.de
Thu Apr 5 06:09:39 UTC 2007
Hello,
I have attached my console at the serial port at the backside of the machine (console
IOIOIO). There is an auxiliary serial port too and a vga port.
Where can i look for the vendor or divice ID, i have attached some outputs:
Here are some outputs of the EFI Menu:
Console Configuration
P Serial Acpi(HWP0002,PNP0A03,0)/Pci(1|2) Vt100+ 9600
S VGA Acpi(HWP0002,PNP0A03,0)/Pci(3|0)
devices
C T D
T Y C I
R P F A
L E G G #P #D #C Device Name
== = = = == == == =============================================================
0D R - - - 1 7 Acpi(HWP0002,PNP0A03,0)
0E R - - - 1 3 Acpi(HWP0002,PNP0A03,200)
0F R - - - 1 - Acpi(HWP0002,PNP0A03,300)
10 R - - - 1 - Acpi(HWP0002,PNP0A03,600)
11 R - - - 1 - Acpi(HWP0002,PNP0A03,700)
15 D - - 1 - - Acpi(HWP0002,PNP0A03,0)/Pci(1|0)
16 D - - 1 - - Acpi(HWP0002,PNP0A03,0)/Pci(1|1)
17 B - - 1 1 1 Acpi(HWP0002,PNP0A03,0)/Pci(1|2)
18 B - - 1 2 4 Usb Open Host Controller
19 B - - 1 2 1 Usb Open Host Controller
1A D - - 1 - - Acpi(HWP0002,PNP0A03,0)/Pci(2|2)
1B B - - 1 5 2 Acpi(HWP0002,PNP0A03,0)/Pci(3|0)
1D B X X 1 1 1 LSI Logic SAS Controller
1E B X X 1 1 1 Acpi(HWP0002,PNP0A03,200)/Pci(2|0)
1F B X X 1 1 1 Acpi(HWP0002,PNP0A03,200)/Pci(2|1)
2F D - - 2 - - Primary Standard Error Device
30 D - - 4 - - Primary Console Input Device
31 D - - 2 - - Primary Console Output Device
36 B - - 1 1 1 16550 Serial UART
37 B - - 1 5 3 VT-100+ Serial Console
38 B X - 1 3 1 Generic Usb Keyboard
39 B - - 1 2 1 Generic Usb Mouse
3A B X - 1 3 1 Generic Usb Keyboard
3B D - - 1 - - Acpi(HWP0002,PNP0A03,0)/Pci(2|0)/Usb(2, 1)
3E B - - 1 4 1 Usb Bot Mass Storage
4F B X X 1 2 3 HP DG146ABAB4 HPD5
50 D X X 1 3 - Broadcom NetXtreme Gigabit Ethernet (BCM5704)
51 D X X 1 3 - Broadcom NetXtreme Gigabit Ethernet (BCM5704)
8E D - - 1 2 - FAT File System [FAT12] 16 MB
8F D - - 1 2 - FAT File System [FAT32] 500 MB
90 D - - 1 1 -
Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50003717C59,Lun0)/HD(Part2,Sig6F497DFA-D161-11DB-8003-D6217B60E588)
91 D - - 1 2 - FAT File System [FAT32] 400 MB
Shell>
Shell> map
Device mapping table
fs0 : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Usb(0, 0)/CDROM(Entry0)
fs1 :
Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50003717C59,Lun0)/HD(Part1,Sig6F497DDC-D161-11DB-8002-D6217B60E588)
fs2 :
Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50003717C59,Lun0)/HD(Part3,Sig6F497E18-D161-11DB-8004-D6217B60E588)
blk0 : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Usb(0, 0)
blk1 : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Usb(0, 0)/CDROM(Entry0)
blk2 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50003717C59,Lun0)
blk3 :
Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50003717C59,Lun0)/HD(Part1,Sig6F497DDC-D161-11DB-8002-D6217B60E588)
blk4 :
Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50003717C59,Lun0)/HD(Part2,Sig6F497DFA-D161-11DB-8003-D6217B60E588)
blk5 :
Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50003717C59,Lun0)/HD(Part3,Sig6F497E18-D161-11DB-8004-D6217B60E588)
Shell>
info -a all
SYSTEM INFORMATION
Date/Time: Apr 5, 2007 05:45:55 (20:07:04:05:05:45:55)
Manufacturer: hp
Product Name: server rx2660
Product Number: AD245A
Serial Number: DEH47110B1
UUID: B6F1E2E1-EDF7-11DB-BAF2-FEFC60E9A772
System Bus Frequency: 266 MHz
PROCESSOR MODULE INFORMATION
# of L3 L4 Family/
CPU Logical Cache Cache Model Processor
Module CPUs Speed Size Size (hex.) Rev State
------ ------- -------- ------ ------ ------- --- ------------
0 2 1.6 GHz 9 MB None 20/00 C2 Active
1 2 1.6 GHz 9 MB None 20/00 C2 Active
CPU threads are turned off.
MEMORY INFORMATION
---- DIMM A ----- ---- DIMM B -----
DIMM Current DIMM Current
--- ------ ---------- ------ ----------
0 2048MB Active 2048MB Active
1 2048MB Active 2048MB Active
2 ---- ----
3 ---- ----
Active Memory : 8192 MB
Installed Memory : 8192 MB
I/O INFORMATION
BOOTABLE DEVICES
Order Media Type Path
----- ---------- ---------------------------------------
1 CDROM Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Usb(0, 0)/CDROM(Entry0)
2 HARDDRIVE
Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50003717C59,Lun0)/HD(Part1,Sig6F497DDC-D161-11DB-8002-D6217B60E588)
3 HARDDRIVE
Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50003717C59,Lun0)/HD(Part3,Sig6F497E18-D161-11DB-8004-D6217B60E588)
Seg Bus Dev Fnc Vendor Device Slot
# # # # ID ID # Path
--- --- --- --- ------ ------ --- -----------
00 00 01 00 0x103C 0x1303 XX Acpi(HWP0002,PNP0A03,0)/Pci(1|0)
00 00 01 01 0x103C 0x1302 XX Acpi(HWP0002,PNP0A03,0)/Pci(1|1)
00 00 01 02 0x103C 0x1048 XX Acpi(HWP0002,PNP0A03,0)/Pci(1|2)
00 00 02 00 0x1033 0x0035 XX Acpi(HWP0002,PNP0A03,0)/Pci(2|0)
00 00 02 01 0x1033 0x0035 XX Acpi(HWP0002,PNP0A03,0)/Pci(2|1)
00 00 02 02 0x1033 0x00E0 XX Acpi(HWP0002,PNP0A03,0)/Pci(2|2)
00 00 03 00 0x1002 0x515E XX Acpi(HWP0002,PNP0A03,0)/Pci(3|0)
00 01 01 00 0x1000 0x0054 XX Acpi(HWP0002,PNP0A03,200)/Pci(1|0)
00 01 02 00 0x14E4 0x1648 XX Acpi(HWP0002,PNP0A03,200)/Pci(2|0)
00 01 02 01 0x14E4 0x1648 XX Acpi(HWP0002,PNP0A03,200)/Pci(2|1)
Fast initialization: Enabled
System Wake-On-LAN: Enabled
BOOT INFORMATION
Monarch CPU:
Current Preferred
Monarch Monarch
CPU CPU
Module/ Module/
Logical Logical Warnings
------- --------- --------
0/0 0/0
AutoBoot: ON - Timeout is : 10 sec
Boottest:
BOOTTEST Settings Default Variable
OS is not speedy boot aware.
Selftest Setting
--------- --------------
early_cpu Run this test
late_cpu Run this test
platform Run this test
chipset Run this test
io_hw Run this test
mem_init Run this test
mem_test Run this test
LAN Address Information:
LAN Address Path
----------------- ----------------------------------------
*Mac(0017A499ADBB) Acpi(HWP0002,PNP0A03,200)/Pci(2|0)/Mac(0017A499ADBB)
Mac(0017A499ADBA) Acpi(HWP0002,PNP0A03,200)/Pci(2|1)/Mac(0017A499ADBA)
FIRMWARE INFORMATION
*System Firmware A Revision: 1.05 [4645]
PAL_A: 7.31/7.46
PAL_B: 8.30
EFI Spec: 1.10
EFI Intel Drop: 14.62
EFI Build: 5.65
SAL Spec: 3.20
SAL_A: 2.00
SAL_B: 1.05
POSSE: 0.21
ACPI: 7.00
SMBIOS: 2.3.2a
System Firmware B Revision: 1.05 [4645]
BMC Revision: 5.02
IPMI: 1.00
Management Processor Revision: F.01.58
Updatable EFI Drivers:
Floating-Point Software Assistance Handler: 00000118
Broadcom Gigabit Ethernet Driver: 00090404
SCSI Bus Driver: 00000021
SCSI Tape Driver: 00000020
Usb Ohci Driver: 00000034
USB Bus Driver: 00000014
USB Bot Mass Storage Driver: 00000014
Generic USB Mass Storage Driver: 00000015
* Indicates active system firmware image
WARNING AND STOP BOOT INFORMATION
CHIP REVISION INFORMATION
Chip Logical Device Chip
Type ID ID Revision
------------------- ------- ------ --------
Memory Controller 0 4032 0020
Root Bridge 0 4030 0020
Host Bridge 0000 122e 0032
Host Bridge 0002 122e 0032
Host Bridge 0003 12ee 0011
Host Bridge 0006 12ee 0011
Host Bridge 0007 12ee 0011
Other Bridge 0 0 0030
Other Bridge 0 0 5004
Baseboard MC 0 0 0502
SYSTEM SECURITY CONFIGURATION
Trusted Boot: Not Supported
TPM: Not Present
Marcel Moolenaar schrieb:
>
> On Apr 4, 2007, at 12:47 AM, Richard Walter wrote:
>
>> Hello,
>>
>> I'am new with itanium boxes and freebsd. I tried to install freebsd 7.0
>> 03/2007 snapshot on a HP rx2660 and have the problem, that
>> installation hangs
>> at message "Trying to mount root from ufs:/dev/md0".
>> I have the same problem with freebsd 6.2.
>> Is this a bug or do i have made something wrong?
>
> The problem is that you don't have a console. Only uart0 is
> found and that's the debug port. You have a remote management
> card that has the console, but the card is not detected:
>
>> pci0: <simple comms> at device 1.1 (no driver attached)
>> pci0: <simple comms, UART> at device 1.2 (no driver attached)
>
> If you have the vendor and device IDs of that card then I can
> add those. Chances are that you'll see more :-)
>
> BTW: You should be able to find the vendor and device ID in
> EFI.
>
> HTH,
>
> --Marcel Moolenaar
> xcllnt at mac.com
>
>
____________
Virus checked by G DATA AntiVirusKit
Version: AVK 17.3771 from 05.04.2007
Virus news: www.antiviruslab.com
More information about the freebsd-ia64
mailing list