Install problem HP integrity rx2660(Montecito)

Wed Apr 4 08:06:14 UTC 2007

Hello,

I'am new with itanium boxes and freebsd. I tried to install freebsd 7.0
03/2007 snapshot on a HP rx2660 and have the problem, that installation hangs
at message "Trying to mount root from ufs:/dev/md0".
I have the same problem with freebsd 6.2.
Is this a bug or do i have made something wrong?
I've tried to search for this, but i really found no solution regarding this topic.
Here is the output of the console session:

Loading.: Internal Bootable DVD
Searching for devices
Broadcom NetXtreme Gigabit Ethernet (BCM5704) is detected (PCI-X)
Broadcom NetXtreme Gigabit Ethernet (BCM5704) is detected (PCI-X)
Starting: Internal Bootable DVD
Consoles: EFI console
Image base: 0x00000100fef72000

FreeBSD/ia64 EFI boot, Revision 1.2
(root at pluto1.freebsd.org, Thu Mar  8 07:13:33 UTC 2007)
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0xa925c0+0x4d568 syms=[0x8+0x79a58+0x8+0x675fa]
\
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Entering /boot/kernel/kernel at 0xe000000004068000...
Skipping memory chunk start 0x100000000
Skipping memory chunk start 0x10040000000
Skipping memory chunk start 0x100ff000000
Skipping memory chunk start 0x100ff801000
Skipping memory chunk start 0x100ffa00000
Skipping memory chunk start 0x100ffe00000
Skipping memory chunk start 0x100ffe80000
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT-200703 #0: Thu Mar  8 15:21:20 UTC 2007
     root at pluto1.freebsd.org:/usr/obj/usr/src/sys/GENERIC
CPU: Montecito tanium 2)
   Origin = "GenuineIntel"  Revision = 7
   Features = 0x5<LB,AO>
real memory  = 1050492928 (1001 MB)
avail memory =PSWA Revision = 0x10012, Entry = 0xe0000100ffd18050
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0: SAPIC Id=0, SAPI: SAPIC Id=2, SAPIC Eid=0
acpi0: <HP> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> iomem 0xff5d8004-0xff5d8007 on acpi0
cpu0: <ACPI CPU> on acpi0
device_attach: acpi_perf0 attach returned 6
device_attach: acpi_perf0 attach returned 6
cpu1: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 1.0 (no driver attached)
pci0: <simple comms> at device 1.1 (no driver attached)
pci0: <simple comms, UART> at device 1.2 (no driver attached)
ohci0: <NEC uPD 9210 USB controller> mem 0x88032000-0x88032fff irq 17 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0x88031000-0x88031fff irq 18 at device 2.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0x88030000-0x880300ff irq 19 at device 2.2 
on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 3 ports each: usb0 usb1
usb2: <NEC uPD 720100 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 5 ports with 5 removable, self powered
umass0: <HEWLETT PACKARD INTEGRITY SERVER, class 0/0, rev 2.00/0.a1, addr 2> on uhub2
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 
0x80000000-0x87ffffff,0x88020000-0x8802ffff at device 3.0 on pci0
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pci1:2:0: bad VPD cksum, remain 249
pci1:2:1: bad VPD cksum, remain 249
mpt0: <LSILogic SAS/SATA Adapter> port 0x4000-0x40ff mem 
0xa0470000-0xa0473fff,0xa0460000-0xa046ffff irq 27 at device 1.0 on pci1
mpt0: [GIANT-LOCKED]
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.13.0
mpt0: mpt_cam_event: 0x16
mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
mpt0: mpt_cam_event: 0x12
mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required).
mpt0: mpt_cam_event: 0x16
mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
bge0: <PCI-X 2-port 2Gb FC/4port 1000BT COM MEZZ, ASIC rev. 0x2100> mem 
0xa0450000-0xa045ffff irq 29 at device 2.0 on pci1
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:17:a4:99:ad:bb
bge0: [ITHREAD]
bge1: <PCI-X 2-port 2Gb FC/4port 1000BT COM MEZZ, ASIC rev. 0x2100> mem 
0xa0440000-0xa044ffff irq 30 at device 2.1 on pci1
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge1: Ethernet address: 00:17:a4:99:ad:ba
bge1: [ITHREAD]
pcib2: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI Host-PCI bridge> on acpi0
pci4: <ACPI PCI bus> on pcib4
uart0: <16550 or compatible> iomem 0xff5e2000-0xff5e2007 irq 24 on acpi0
uart0: [FILTER]
uart0: debug port (9600,n,8,1)
ukbd0: <HP Virtual Management Device, class 0/0, rev 1.10/0.01, addr 2> on uhub0
ums0: <HP Virtual Management Device, class 0/0, rev 1.10/0.01, addr 2> on uhub0
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
ukbd1: <CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 3> on uhub0
ums0: <CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 3> on uhub0
ums0: 3 buttons and Z dir.
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 8388608 bytes at 0xe000000004bc0b90
SMP: 4 CPUs found; 2 CPUs usable; 2 CPUs woken
da0 at mpt0 bus 0 target 1 lun 0
da0: <HP DG146ABAB4 HPD5> Fixed Direct Access SCSI-5 device
da0: 300.000MB/s transfers
da0: Command Queueing Enabled
da0: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C)
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <TEAC DV-28E-N C.6C> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: cd present [226734 x 2048 byte records]
GEOM_LABEL: Label for provider cd0 is iso9660/FreeBSD_Install.
GEOM_LABEL: Label for provider da0p1 is msdosfs/IA64_EFI.
Trying to mount root from ufs:/dev/md0

____________
Virus checked by G DATA AntiVirusKit
Version: AVK 17.3751 from 04.04.2007
Virus news: www.antiviruslab.com