i386/80092: PC Cards do not work at all on laptop Compaq N800V

[Vittorio]

>Number:         80092
>Category:       i386
>Synopsis:       PC Cards do not work at all on laptop Compaq N800V
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    freebsd-i386
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Tue Apr 19 08:50:24 GMT 2005
>Closed-Date:
>Last-Modified:
>Originator:     Vittorio
>Release:        5.4 stable (but also 5.3 stable)
>Organization:
>Environment:
FreeBSD fbsd 5.4-STABLE FreeBSD 5.4-STABLE #0: Sun Apr 17 21:31:16 CEST 2005     
root at fbsd:/usr/obj/usr/src/sys/VIC01  i386    
>Description:
  No pcmcia cards I insert into the slot seems to be recognized by the system and to work. 
Referring, only for an example, to my pcmcia wireless Cisco 350 card (which I'm sure is well supported!) in my tailored kernel I have the relating devices

   # PCMCIA and cardbus bridge support
device		cbb		# cardbus (yenta) bridge
device		pccard		# PC Card (16-bit) bus
device		cardbus		# CardBus (32-bit) bus
# Wireless NIC cards
device		wlan		# 802.11 support
device		an		
device		awi		
device		wi		
#device		wl		

In rc.conf I enabled pccard_enable="YES"

Here an extract of dmesg.boot 

FreeBSD 5.4-STABLE #0: Sun Apr 17 21:31:16 CEST 2005
    root at fbsd:/usr/obj/usr/src/sys/VIC01
.......................................
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <simple comms> at device 4.0 (no driver attached)
cbb0: <TI1410 PCI-CardBus Bridge> mem 0x80100000-0x80100fff irq 11 at device 6.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
..............................

Timecounters tick every 10.000 msec
ad0: 38154MB <TOSHIBA MK4019GAX/FA001F> [77520/16/63] at ata0-master UDMA100
pccard0: Card has no functions!
cbb0: PC Card card activation failed

These two last lines 

pccard0: Card has no functions!
cbb0: PC Card card activation failed

pop up in the /var/log/messages file every time I (re-)insert the Cisco wireless card AND..... EVERY OTHER PCMCIA CARD (ethernet, serial GPRS, smartmedia reader)!!!!!
>How-To-Repeat:
Reinserting pcmcia cards
>Fix:
      
>Release-Note:
>Audit-Trail:
>Unformatted: