kern/62855
Nate Lawson
nate at root.org
Tue Feb 17 16:30:16 PST 2004
The following reply was made to PR i386/62855; it has been noted by GNATS.
From: Nate Lawson <nate at root.org>
To: freebsd-gnats-submit at freebsd.org
Cc:
Subject: kern/62855
Date: Tue, 17 Feb 2004 16:20:35 -0800 (PST)
This message is in MIME format. The first part should be readable text,
while the remaining parts are likely unreadable without MIME-aware tools.
Send mail to mime at docserver.cac.washington.edu for more info.
--Boundary-00=_pDqMA/qYsvirDDx
Content-Type: TEXT/PLAIN; CHARSET=US-ASCII
Content-ID: <20040217162023.P31680 at root.org>
Content-Disposition: INLINE
On Tuesday 17 February 2004 04:02 pm, Philip Paeps wrote:
> > The system was made in 1999. The latest BIOS is version 1.05 from
> > 2000-03-01.
>
> Do the BIOS notes literally claim 'ACPI for compatibility', or do they
> really just mean 'power management', which could be APM? Could be an
> option in your BIOS to explicitely enable ACPI as well?
I've scoured the BIOS menus and can't find anything relating to ACPI nor
PNP. Here's what the release notes say:
1.05 BIOS Revision 6
- Added setup item to disable/enable the Intel Processor Serial Number
- Added newest Intel CPU Firmware Patches for Tanner B0/C0 Processors
- Added support for PXE device ROM boot and IPL boot recovery via INT 18
- ACPI updates for release level Windows 2000
1.04 BIOS Revision 5
- Fix for 550 MHz CP:37 Post Hang
- Updated ACPI for Windows 2000
- Fix for problem with USB and Windows 2000
- Updated DMI code to support 550 Mhz processors
1.03 BIOS Revision 4
- Fix for 500 MHz/2MB Pentium III Xeon Processor post hang
- Added support 550 MHz and C0 Stepping Pentium III Xeon Processors
- Fix for remote flashing BIOS via the service processor over ethernet and
RS-485
1.02 BIOS Revision 3
- Added support for 500 MHz processor
- Added support for 450 MHz processor
1.01 New release - BIOS Revision 1.
- Display and log Processor not functioning message.
- Fix problem with PCI Hot Add adapter when system has 4GBytes of memory.
- Updated ACPI code for ACPI Operating Systems .
- Add interrupts 3, 5 & 15 to PIC mode.
- Change L2 cache latency settings to improve performance.
------- ------------------------
1.00 First release - BIOS level 0.
> > It seems to run okay without ACPI, though a number of PNP devices remain
> > unidentified at boot.
>
> Can you post the output from a verbose boot?
I've attached it.
mike
--Boundary-00=_pDqMA/qYsvirDDx
Content-Type: TEXT/PLAIN; CHARSET=iso-8859-1; NAME="netfinity.boot"
Content-ID: <20040217162023.V31680 at root.org>
Content-Description:
Content-Disposition: ATTACHMENT; FILENAME="netfinity.boot"
root at beast.boogie.com:/usr/obj/usr/src/sys/BEAST
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0988000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09881cc.
MP Configuration Table version 1.4 found at 0xc009e560
APIC: Using the MPTable enumerator.
SMP: Added CPU 3 (BSP)
SMP: Added CPU 0 (AP)
SMP: Added CPU 1 (AP)
SMP: Added CPU 2 (AP)
MPTable: <IBM ENSW Osceola SMP >
Calibrating clock(s) ... i8254 clock: 1193241 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 400006111 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (400.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1879048192 (1792 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x000000006e04ffff, 1833070592 bytes (447527 pages)
avail memory = 1832325120 (1747 MB)
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
APIC ID: physical 2, logical 0:2
APIC ID: physical 3, logical 0:3
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 3
cpu1 (AP): APIC ID: 0
cpu2 (AP): APIC ID: 1
cpu3 (AP): APIC ID: 2
bios32: Found BIOS32 Service Directory header at 0xc00fd250
bios32: Entry = 0xfd261 (c00fd261) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xd29c
pnpbios: Found PnP BIOS data at 0xc00fdf10
pnpbios: Entry = f0000:1f16 Rev = 1.0
Other BIOS signatures found:
ioapic0: Assuming intbase of 0
ioapic0: intpin 0 -> ExtINT (edge, activehi)
ioapic0: intpin 1 -> irq 1 (edge, activehi)
ioapic0: intpin 2 -> irq 2 (edge, activehi)
ioapic0: intpin 3 -> irq 3 (edge, activehi)
ioapic0: intpin 4 -> irq 4 (edge, activehi)
ioapic0: intpin 5 -> irq 5 (edge, activehi)
ioapic0: intpin 6 -> irq 6 (edge, activehi)
ioapic0: intpin 7 -> irq 7 (edge, activehi)
ioapic0: intpin 8 -> irq 8 (edge, activehi)
ioapic0: intpin 9 -> irq 9 (edge, activehi)
ioapic0: intpin 10 -> irq 10 (edge, activehi)
ioapic0: intpin 11 -> irq 11 (edge, activehi)
ioapic0: intpin 12 -> irq 12 (edge, activehi)
ioapic0: intpin 13 -> irq 13 (edge, activehi)
ioapic0: intpin 14 -> irq 14 (edge, activehi)
ioapic0: intpin 15 -> irq 15 (edge, activehi)
ioapic0: intpin 16 -> irq 16 (level, activelo)
ioapic0: intpin 17 -> irq 17 (level, activelo)
ioapic0: intpin 18 -> irq 18 (level, activelo)
ioapic0: intpin 19 -> irq 19 (level, activelo)
ioapic0: intpin 20 -> irq 20 (level, activelo)
ioapic0: intpin 21 -> irq 21 (level, activelo)
ioapic0: intpin 22 -> irq 22 (level, activelo)
ioapic0: intpin 23 -> irq 23 (level, activelo)
ioapic1: Assuming intbase of 24
ioapic1: intpin 0 -> irq 24 (level, activelo)
ioapic1: intpin 1 -> irq 25 (level, activelo)
ioapic1: intpin 2 -> irq 26 (level, activelo)
ioapic1: intpin 3 -> irq 27 (level, activelo)
ioapic1: intpin 4 -> irq 28 (level, activelo)
ioapic1: intpin 5 -> irq 29 (level, activelo)
ioapic1: intpin 6 -> irq 30 (level, activelo)
ioapic1: intpin 7 -> irq 31 (level, activelo)
ioapic1: intpin 8 -> irq 32 (level, activelo)
ioapic1: intpin 9 -> irq 33 (level, activelo)
ioapic1: intpin 10 -> irq 34 (level, activelo)
ioapic1: intpin 11 -> irq 35 (level, activelo)
ioapic1: intpin 12 -> irq 36 (level, activelo)
ioapic1: intpin 13 -> irq 37 (level, activelo)
ioapic1: intpin 14 -> irq 38 (level, activelo)
ioapic1: intpin 15 -> irq 39 (level, activelo)
ioapic1: intpin 16 -> irq 40 (level, activelo)
ioapic1: intpin 17 -> irq 41 (level, activelo)
ioapic1: intpin 18 -> irq 42 (level, activelo)
ioapic1: intpin 19 -> irq 43 (level, activelo)
ioapic1: intpin 20 -> irq 44 (level, activelo)
ioapic1: intpin 21 -> irq 45 (level, activelo)
ioapic1: intpin 22 -> irq 46 (level, activelo)
ioapic1: intpin 23 -> irq 47 (level, activelo)
ioapic0: intpin 1 trigger: edge
ioapic0: intpin 1 polarity: active-hi
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: active-hi
ioapic0: intpin 3 trigger: edge
ioapic0: intpin 3 polarity: active-hi
ioapic0: intpin 4 trigger: edge
ioapic0: intpin 4 polarity: active-hi
ioapic0: intpin 6 trigger: edge
ioapic0: intpin 6 polarity: active-hi
ioapic0: intpin 7 trigger: edge
ioapic0: intpin 7 polarity: active-hi
ioapic0: intpin 8 trigger: edge
ioapic0: intpin 8 polarity: active-hi
ioapic0: intpin 12 trigger: edge
ioapic0: intpin 12 polarity: active-hi
ioapic0: intpin 13 trigger: edge
ioapic0: intpin 13 polarity: active-hi
ioapic0: intpin 14 trigger: edge
ioapic0: intpin 14 polarity: active-hi
ioapic0: intpin 15 trigger: level
ioapic0: intpin 15 polarity: active-lo
ioapic0: intpin 16 trigger: level
ioapic0: intpin 16 polarity: active-lo
ioapic1: intpin 5 trigger: level
ioapic1: intpin 5 polarity: active-lo
ioapic0: intpin 18 trigger: level
ioapic0: intpin 18 polarity: active-lo
ioapic0: intpin 9 trigger: edge
ioapic0: intpin 9 polarity: active-hi
ioapic1: intpin 0 trigger: level
ioapic1: intpin 0 polarity: active-lo
ioapic1: intpin 1 trigger: level
ioapic1: intpin 1 polarity: active-lo
ioapic1: intpin 2 trigger: level
ioapic1: intpin 2 polarity: active-lo
ioapic1: intpin 3 trigger: level
ioapic1: intpin 3 polarity: active-lo
ioapic1: intpin 4 trigger: level
ioapic1: intpin 4 polarity: active-lo
ioapic1: intpin 6 trigger: level
ioapic1: intpin 6 polarity: active-lo
ioapic1: intpin 7 trigger: level
ioapic1: intpin 7 polarity: active-lo
ioapic1: intpin 8 trigger: level
ioapic1: intpin 8 polarity: active-hi
ioapic1: intpin 9 trigger: level
ioapic1: intpin 9 polarity: active-lo
ioapic1: intpin 10 trigger: level
ioapic1: intpin 10 polarity: active-lo
ioapic1: intpin 11 trigger: level
ioapic1: intpin 11 polarity: active-lo
ioapic1: intpin 15 trigger: level
ioapic1: intpin 15 polarity: active-lo
ioapic1: intpin 15 trigger: level
ioapic1: intpin 15 polarity: active-lo
ioapic1: intpin 18 trigger: level
ioapic1: intpin 18 polarity: active-lo
ioapic1: intpin 16 trigger: level
ioapic1: intpin 16 polarity: active-lo
ioapic1: intpin 16 trigger: level
ioapic1: intpin 16 polarity: active-lo
ioapic1: intpin 18 trigger: level
ioapic1: intpin 18 polarity: active-lo
ioapic1: intpin 17 trigger: level
ioapic1: intpin 17 polarity: active-lo
ioapic1: intpin 17 trigger: level
ioapic1: intpin 17 polarity: active-lo
ioapic1: intpin 18 trigger: level
ioapic1: intpin 18 polarity: active-lo
ioapic1: intpin 18 trigger: level
ioapic1: intpin 18 polarity: active-lo
ioapic1: intpin 18 trigger: level
ioapic1: intpin 18 polarity: active-lo
ioapic1: intpin 19 trigger: level
ioapic1: intpin 19 polarity: active-lo
ioapic1: intpin 19 trigger: level
ioapic1: intpin 19 polarity: active-lo
ioapic1: intpin 19 trigger: level
ioapic1: intpin 19 polarity: active-lo
ioapic1: intpin 19 trigger: level
ioapic1: intpin 19 polarity: active-lo
ioapic1: intpin 20 trigger: level
ioapic1: intpin 20 polarity: active-lo
ioapic1: intpin 20 trigger: level
ioapic1: intpin 20 polarity: active-lo
ioapic1: intpin 19 trigger: level
ioapic1: intpin 19 polarity: active-lo
ioapic1: intpin 21 trigger: level
ioapic1: intpin 21 polarity: active-lo
ioapic1: intpin 21 trigger: level
ioapic1: intpin 21 polarity: active-lo
ioapic1: intpin 20 trigger: level
ioapic1: intpin 20 polarity: active-lo
ioapic1: intpin 22 trigger: level
ioapic1: intpin 22 polarity: active-lo
ioapic1: intpin 22 trigger: level
ioapic1: intpin 22 polarity: active-lo
ioapic1: intpin 20 trigger: level
ioapic1: intpin 20 polarity: active-lo
ioapic1: intpin 23 trigger: level
ioapic1: intpin 23 polarity: active-lo
ioapic1: intpin 23 trigger: level
ioapic1: intpin 23 polarity: active-lo
ioapic1: intpin 20 trigger: level
ioapic1: intpin 20 polarity: active-lo
ioapic1: intpin 15 trigger: level
ioapic1: intpin 15 polarity: active-lo
ioapic1: intpin 15 trigger: level
ioapic1: intpin 15 polarity: active-lo
ioapic1: intpin 21 trigger: level
ioapic1: intpin 21 polarity: active-lo
ioapic1: intpin 16 trigger: level
ioapic1: intpin 16 polarity: active-lo
ioapic1: intpin 16 trigger: level
ioapic1: intpin 16 polarity: active-lo
ioapic1: intpin 21 trigger: level
ioapic1: intpin 21 polarity: active-lo
ioapic1: intpin 17 trigger: level
ioapic1: intpin 17 polarity: active-lo
ioapic1: intpin 17 trigger: level
ioapic1: intpin 17 polarity: active-lo
ioapic1: intpin 21 trigger: level
ioapic1: intpin 21 polarity: active-lo
lapic: Routing NMI -> LINT1
lapic: Routing ExtINT -> LINT0
ioapic1 <Version 1.1> irqs 24-47 on motherboard
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x03000000 VER: 0x00040011 LDR: 0x08000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
ACPI-0159: *** Error: AcpiLoadTables: Could not get RSDP, AE_NO_ACPI_TABLES
ACPI-0213: *** Error: AcpiLoadTables: Could not load tables: AE_NO_ACPI_TABLES
ACPI: table load failed: AE_NO_ACPI_TABLES
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000008
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060100] [hdr=80] is there (id=71108086)
pcibios: BIOS version 2.10
pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=0, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00000450, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=0, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00000460, size 5, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=0, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=255
map[90]: type 4, range 32, base 00000440, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=0, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1014, dev=0x0022, revid=0x07
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x83 (32750 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base 84000000, size 26, enabled
found-> vendor=0x5333, dev=0x8901, revid=0x16
bus=0, slot=10, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x84ca, revid=0x03
bus=0, slot=16, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x84cb, revid=0x04
bus=0, slot=18, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0156, statreg=0x2280, cachelnsz=8 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x84cb, revid=0x04
bus=0, slot=19, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0156, statreg=0x2280, cachelnsz=8 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x84cb, revid=0x04
bus=0, slot=20, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0156, statreg=0x2280, cachelnsz=8 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
isab0: <PCI-ISA bridge> at device 0.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x450-0x45f at device 0.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x460-0x47f at device 0.2 on pci0
pcib0: slot 0 INTD routed to irq 18
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piix0: <PIIX Timecounter> port 0x440-0x44f at device 0.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x3000-0x3fff
pcib1: memory decode 0x8b000000-0x8c0fffff
pcib1: prefetched decode 0xfff00000-0xffefffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 4, range 32, base 00003000, size 8, enabled
map[14]: type 1, range 32, base 8c000000, size 12, enabled
pcib1: slot 4 INTA routed to irq 15
found-> vendor=0x9004, dev=0x7895, revid=0x04
bus=1, slot=4, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x64 (3000 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=15
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 00003100, size 8, enabled
map[14]: type 1, range 32, base 8c001000, size 12, enabled
pcib1: slot 4 INTB routed to irq 16
found-> vendor=0x9004, dev=0x7895, revid=0x04
bus=1, slot=4, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x64 (3000 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=b, irq=16
powerspec 1 supports D0 D3 current D0
ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0x3000-0x30ff mem 0x8c000000-0x8c000fff irq 15 at device 4.0 on pci1
ahc0: Defaulting to MEMIO off
pcib1: device ahc0 requested decoded I/O range 0x3000-0x30ff
ahc0: Reading SEEPROM...done.
ahc0: Low byte termination Enabled
ahc0: High byte termination Enabled
ahc0: Downloading Sequencer Program... 413 instructions downloaded
ahc0: Features 0x16235, Bugs 0x15, Flags 0x20485541
aic7895C: Ultra Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7895 Ultra SCSI adapter> port 0x3100-0x31ff mem 0x8c001000-0x8c001fff irq 16 at device 4.1 on pci1
ahc1: Defaulting to MEMIO off
pcib1: device ahc1 requested decoded I/O range 0x3100-0x31ff
ahc1: Reading SEEPROM...done.
ahc1: Low byte termination Enabled
ahc1: High byte termination Enabled
ahc1: Downloading Sequencer Program... 413 instructions downloaded
ahc1: Features 0x16235, Bugs 0x15, Flags 0x20485541
aic7895C: Ultra Wide Channel B, SCSI Id=7, 32/253 SCBs
pci0: <display, VGA> at device 10.0 (no driver attached)
pcib4: <MPTable Host-PCI bridge> at pcibus 4 on motherboard
pci4: <PCI bus> on pcib4
pci4: physical bus=4
map[10]: type 1, range 32, base c5cff000, size 12, enabled
map[14]: type 4, range 32, base 00006000, size 6, enabled
map[18]: type 1, range 32, base c5b00000, size 20, enabled
pcib4: slot 6 INTA routed to irq 29
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=4, slot=6, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x64 (3000 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=29
powerspec 2 supports D0 D1 D2 D3 current D0
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x6000-0x603f mem 0xc5b00000-0xc5bfffff,0xc5cff000-0xc5cfffff irq 29 at device 6.0 on pci4
fxp0: using memory space register mapping
fxp0: Ethernet address 00:04:ac:53:80:88
fxp0: PCI IDs: 8086 1229 1014 305c 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
pcib10: <MPTable Host-PCI bridge> at pcibus 10 on motherboard
pci10: <PCI bus> on pcib10
pci10: physical bus=10
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
pnpbios: 18 devices, largest 186 bytes
PNP0c02: adding fixed io range 0x2e-0x2f, size=0x2, align=0x1
pnpbios: handle 1 device ID PNP0c02 (020cd041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
pnpbios: handle 2 device ID PNP0501 (0105d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
pnpbios: handle 3 device ID PNP0501 (0105d041)
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x1
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77f, size=0x8, align=0
pnpbios: handle 4 device ID PNP0401 (0104d041)
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0
pnpbios: handle 5 device ID PNP0700 (0007d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 6 device ID PNP0f13 (130fd041)
PNP0c01: adding memory range 0xe0000-0xfffff, size=0x20000, align=0
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c01: adding fixed memory32 range 0xfffc0000-0xffffffff, size=0x40000
pnpbios: handle 8 device ID PNP0c01 (010cd041)
PNP0c01: adding memory range 0-0x9ffff, size=0xa0000, align=0
PNP0c01: adding memory range 0x100000-0x10ffbff, size=0xfffc00, align=0
pnpbios: handle 9 device ID PNP0c01 (010cd041)
PNP0c04: adding fixed io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 10 device ID PNP0c04 (040cd041)
PNP0303: adding fixed io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding fixed io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 11 device ID PNP0303 (0303d041)
PNP0800: adding fixed io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 12 device ID PNP0800 (0008d041)
PNP0b00: adding fixed io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 13 device ID PNP0b00 (000bd041)
PNP0100: adding fixed io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 14 device ID PNP0100 (0001d041)
PNP0200: adding fixed io range 0-0x1f, size=0x20, align=0x1
PNP0200: adding fixed io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding fixed io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 15 device ID PNP0200 (0002d041)
PNP0c01: adding fixed io range 0x80-0x80, size=0x1, align=0x1
pnpbios: handle 16 device ID PNP0c01 (010cd041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 18 device ID PNP0a03 (030ad041)
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x6001 0x6011 0x6001 0x6001
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x6001 0x6009 0x6001 0x6001
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x2e specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
psmcpnp0: <PS/2 mouse port> at irq 12 on isa0
psm0: current command byte:0065
psm0: failed to reset the aux device.
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x80 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330. Failing probe.
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 400006111 Hz quality -100
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ata0-master: setting PIO4 on Intel PIIX4 chip
acd0: <CD-ROM CDU701-F/1.0s> CDROM drive at ata0 as master
acd0: read 2412KB/s (5512KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 3 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
(ahc1:A:0:0): Received WDTR 1 filtered to 0
(ahc1:A:0:0): Target Initiated WDTR
(ahc1:A:0:0): Sending WDTR 0
ahc1: target 0 using 8bit transfers
(ahc1:A:0:0): Received SDTR period c, offset 1e
Filtered to period 0, offset 0
ahc1: target 0 using asynchronous transfers
(ahc1:A:0:0): Target Initiated SDTR
(ahc1:A:0:0): Sending SDTR period 45, offset 0
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
(probe15:ahc1:0:0:0): Retrying Command
(probe16:ahc1:0:1:0): Retrying Command
(probe17:ahc1:0:2:0): Retrying Command
(probe18:ahc1:0:3:0): Retrying Command
(ahc1:A:0:0): Sending WDTR 1
(ahc1:A:0:0): Received WDTR 1 filtered to 1
ahc1: target 0 using 16bit transfers
(ahc1:A:0:0): Sending SDTR period c, offset 8
(ahc1:A:0:0): Received SDTR period c, offset 8
Filtered to period c, offset 8
ahc1: target 0 synchronous at 20.0MHz, offset = 0x8
(ahc1:A:1:0): Sending WDTR 1
(ahc1:A:1:0): Received WDTR 1 filtered to 1
ahc1: target 1 using 16bit transfers
(ahc1:A:1:0): Sending SDTR period c, offset 8
(ahc1:A:1:0): Received SDTR period c, offset 8
Filtered to period c, offset 8
ahc1: target 1 synchronous at 20.0MHz, offset = 0x8
(ahc1:A:2:0): Sending WDTR 1
(ahc1:A:2:0): Received WDTR 1 filtered to 1
ahc1: target 2 using 16bit transfers
(ahc1:A:2:0): Sending SDTR period c, offset 8
(ahc1:A:2:0): Received SDTR period c, offset 8
Filtered to period c, offset 8
ahc1: target 2 synchronous at 20.0MHz, offset = 0x8
(ahc1:A:3:0): Sending WDTR 1
(ahc1:A:3:0): Received WDTR 1 filtered to 1
ahc1: target 3 using 16bit transfers
(ahc1:A:3:0): Sending SDTR period c, offset 8
(ahc1:A:3:0): Received SDTR period c, offset 8
Filtered to period c, offset 8
ahc1: target 3 synchronous at 20.0MHz, offset = 0x8
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ses0 at ahc1 bus 0 target 14 lun 0
ses0: <IBM SAF-TE 2> Fixed Processor SCSI-2 device
ses0: Serial Number 1
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
pass0 at ahc1 bus 0 target 0 lun 0
pass0: <IBM-PCCO DGHS09Y !# 04F0> Fixed Direct Access SCSI-3 device
pass0: Serial Number 6820307EGA
pass0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
pass1 at ahc1 bus 0 target 1 lun 0
pass1: <IBM-PSG DNES-309170Y !# SC30> Fixed Direct Access SCSI-3 device
pass1: Serial Number AJ0K7985
pass1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
pass2 at ahc1 bus 0 target 2 lun 0
pass2: <IBM-PSG DNES-309170Y !# SAHR> Fixed Direct Access SCSI-3 device
pass2: Serial Number AJLDZ500
pass2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
pass3 at ahc1 bus 0 target 3 lun 0
pass3: <IBM-PSG DNES-309170Y !# SC30> Fixed Direct Access SCSI-3 device
pass3: Serial Number AJ0B0715
pass3: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
pass4 at ahc1 bus 0 target 14 lun 0
pass4: <IBM SAF-TE 2> Fixed Processor SCSI-2 device
pass4: Serial Number 1
pass4: 3.300MB/s transfers
da0 at ahc1 bus 0 target 0 lun 0
da0: <IBM-PCCO DGHS09Y !# 04F0> Fixed Direct Access SCSI-3 device
da0: Serial Number 6820307EGA
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 8678MB (17774160 512 byte sectors: 255H 63S/T 1106C)
da1 at ahc1 bus 0 target 1 lun 0
da1: <IBM-PSG DNES-309170Y !# SC30> Fixed Direct Access SCSI-3 device
da1: Serial Number AJ0K7985
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 8678MB (17774160 512 byte sectors: 255H 63S/T 1106C)
da2 at ahc1 bus 0 target 2 lun 0
da2: <IBM-PSG DNES-309170Y !# SAHR> Fixed Direct Access SCSI-3 device
da2: Serial Number AJLDZ500
da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da2: 8678MB (17774160 512 byte sectors: 255H 63S/T 1106C)
da3 at ahc1 bus 0 target 3 lun 0
da3: <IBM-PSG DNES-309170Y !# SC30> Fixed Direct Access SCSI-3 device
da3: Serial Number AJ0B0715
da3: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da3: 8678MB (17774160 512 byte sectors: 255H 63S/T 1106C)
GEOM: new disk da0
GEOM: new disk da1
GEOM: new disk da2
GEOM: new disk da3
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x00000000 VER: 0x00040011 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x01000000 VER: 0x00040011 LDR: 0x02000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x02000000 VER: 0x00040011 LDR: 0x04000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
ioapic1: routing intpin 5 (IRQ 29) to cluster 0
ioapic0: routing intpin 1 (IRQ 1) to cluster 0
ioapic0: routing intpin 3 (IRQ 3) to cluster 0
ioapic0: routing intpin 4 (IRQ 4) to cluster 0
ioapic0: routing intpin 6 (IRQ 6) to cluster 0
ioapic0: routing intpin 7 (IRQ 7) to cluster 0
ioapic0: routing intpin 8 (IRQ 8) to cluster 0
ioapic0: routing intpin 13 (IRQ 13) to cluster 0
ioapic0: routing intpin 14 (IRQ 14) to cluster 0
ioapic0: routing intpin 15 (IRQ 15) to cluster 0
ioapic0: routing intpin 16 (IRQ 16) to cluster 0
ioapic0: routing intpin 18 (IRQ 18) to cluster 0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:17767827
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 32256 length 9097127424 end 9097159679
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/253/63 s:63 l:53302599
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da3s1, start 32256 length 27290930688 end 27290962943
GEOM: Configure da0s1a, start 0 length 536870912 end 536870911
GEOM: Configure da0s1b, start 536870912 length 536870912 end 1073741823
GEOM: Configure da0s1c, start 0 length 9097127424 end 9097127423
GEOM: Configure da0s1d, start 1073741824 length 536870912 end 1610612735
GEOM: Configure da0s1e, start 1610612736 length 536870912 end 2147483647
GEOM: Configure da0s1f, start 2147483648 length 6949643776 end 9097127423
Mounting root from ufs:/dev/da0s1a
start_init: trying /sbin/init
--Boundary-00=_pDqMA/qYsvirDDx--
More information about the freebsd-i386
mailing list