AW: freebsd-hardware Digest, Vol 232, Issue 1

[ANDREAS Werner OSTERTAG]

you can try to change the pol's(north/southern)in 220/380V~input-line or your sero or earth- point is anywhere not correct.Or you must earth some of equickment


----- Ursprüngliche Mail ----
Von: "freebsd-hardware-request at freebsd.org" <freebsd-hardware-request at freebsd.org>
An: freebsd-hardware at freebsd.org
Gesendet: Montag, den 17. September 2007, 14:00:07 Uhr
Betreff: freebsd-hardware Digest, Vol 232, Issue 1


Send freebsd-hardware mailing list submissions to
    freebsd-hardware at freebsd.org

To subscribe or unsubscribe via the World Wide Web, visit
    http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
or, via email, send a message with subject or body 'help' to
    freebsd-hardware-request at freebsd.org

You can reach the person managing the list at
    freebsd-hardware-owner at freebsd.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of freebsd-hardware digest..."


Today's Topics:

   1. SATA mirrror performance (Jo?o Carlos Mendes Lu?s)


----------------------------------------------------------------------

Message: 1
Date: Sun, 16 Sep 2007 22:52:16 -0300
From: Jo?o Carlos Mendes Lu?s <jonny at jonny.eng.br>
Subject: SATA mirrror performance
To: geom at freebsd.org,  hardware at freebsd.org
Message-ID: <46EDDDD0.2070409 at jonny.eng.br>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Hi,

    I've sent this to -performance, but maybe one of these is the right 
forum.  Sorry to crosspost.  Also, I am not currently subscribed to 
these two lists, so please CC me.

...

    I have just installed two 500G SATA discs from Seagate, model
ST3500641AS in an ASUS M2N-E motherboard (nVidia MCP55 chipset).  Since
this is a home desktop and I need dual boot, I used nVidia's RAID
technology to create the array, while still using the previous disks for
booting.

    Well, the suggested device to control these disks, IIRC, is ataraid,
so I went for it.  But its performance was incredibly slow.  I had less
than half a megabyte per second in a raw transfer (dd).  Formating 100G
UFS2 partitions take more than a minute.  And all this was drivers
fault, as far as I could notice from "systat -v" output.  The array was
operating near 100% capacity.  While running newfs, and this I remember
for sure, the array was performing at 4 (four!) transfers per second,
and near 100% load.

    I also noticed that ataraid does not integrate with GEOM.  Shouldn't
it be by now?

    Just to be sure it was no defect in disks, they worked perfectly in
Windows XP.  So my solution was to build a whole disk RAID1 device using
gmirror, but now I have two independent and non-interoperational RAID
technologies.  Indeed, I am very luck that nVidia's RAID does not use
the same sector as gmirror for metadata, or if they use, that it does
not clash.

    After using gmirror, now I have the RAID in its full performance,
getting over 60Mbytes per second at raw reads, very near the 70MBps from
the specs.  Could only be better if we already had NCQ working.

    Now the question: Is this expected?  Is ataraid somehow deprecated?

    If that matters, this has been done on the last week's RELENG_6
source build.  The CPU is an AMD Athlon 64 X2 5200+, with 3G RAM.

                                        Jonny

-- 
João Carlos Mendes Luís - Networking Engineer - jonny at jonny.eng.br


------------------------------

_______________________________________________
freebsd-hardware at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "freebsd-hardware-unsubscribe at freebsd.org"

End of freebsd-hardware Digest, Vol 232, Issue 1
************************************************


      Heute schon einen Blick in die Zukunft von E-Mails wagen? Versuchen Sie´s mit dem neuen Yahoo! Mail. www.yahoo.de/mail