StorageWorks

Anton Nikiforov anton at nikiforov.ru
Mon Dec 26 06:37:37 PST 2005


Wilko Bulte wrote:

> On Sun, Dec 25, 2005 at 12:15:28AM +0300, Anton Nikiforov wrote..
> 
>>Wilko Bulte wrote:
>>
>>
>>>On Sat, Dec 24, 2005 at 02:13:38AM +0300, Anton Nikiforov wrote..
>>>
>>>
>>>>Dear ALL!
>>>>I have a Intel XEON based server and Compaq StorageWorks FC adapter with 
>>>>FC disk subsystem.
>>>>I did not found any info about drivers available in 
>>>>FreeBSD-5.4-RELEASE-p8 (maybe vendor developed drivers/utilities?).
>>>>
>>>>Could you please help? is there any solution to make this three parts 
>>>>(server, FC adapter and disk subsystem) to work under FreeBSD?
>>>
>>>
>>>*What* Compaq StorageWorks adapter?  There are lots of different
>>>adapters, both from own Compaq production as well as QLogic and Emulex
>>>OEM origin.  Only the Qlogics have a driver in FreeBSD, isp(4).
>>>
>>
>>Hello and thanks for the replay.
>>Here is what i can find in the board
>>Compaq
>>1999 compaq
>>66MHz 64bit PCI controller
>>SP# 161290-001
>>DG# 010007-000
>>AS# 010006-001
>>Rev 0E
>>P225C0EBFK3JXE
>>The biggest chip is Agilent Tachyon TS HPFC-5166A/1.2 L2C1090 J 0026 
>>WEC26005
>>
>>On the other side:
>>BOARD NO 01008-001 A/W REV A FAB REV A
>>2000 (logo) NM4 94V-0
>>
>>Could you please tell me if this will work under FreeBSD? Because i 
>>cannot find any QLogic lables or chips. And cannot take this to "play" 
> 
> 
> No luck I'm afraid.  Like you say, the Qlogic chips are easily 
> distinguishable.  What you have sounds like a Compaq-design, the folks
> in HOU used to use the Tachyon chips quite a lot.  These days we OEM 
> most (all?) of the FC HBAs.
> 
Thanks for the replay.
Could you please supply me with the right card name that will work with 
FreeBSD and this StorageWorks array?
Maybe i can find something cheep to use this box?
And is there any software to manage the array box (in case i'll get 
QLogic card) or i'll have boot into windows to change 0+1 array type to 
something else?

Best regards,
Anton Nikiforov
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 2218 bytes
Desc: S/MIME Cryptographic Signature
Url : http://lists.freebsd.org/pipermail/freebsd-hardware/attachments/20051226/a0cdf175/smime.bin


More information about the freebsd-hardware mailing list