logitech cordless optical mouse problems...

[William Michael Grim]

A good test is to kill moused on your system and drop into a console.
Here, do "cat /dev/ums0" and move the mouse around a little bit.  If a
bunch of random characters begin appearing, your mouse is working just
fine and you've probably chosen the wrong protocol to use with XFree86.
With USB mice, you sometimes need to use the "auto" protocol.

BTW, you can not disable moused on bootup by disabling it in /etc/rc.conf.
I plan to write a patch or something for this sometime because it's
annoying.

Best of luck!

William Michael Grim
Student, Southern Illinois University at Edwardsville
Unix Network Administrator, SIUE, Computer Science dept.
Phone: (217) 341-6552
Email: wgrim at siue.edu



On Tue, 30 Dec 2003, Evren Yurtesen wrote:

> This mouse has a USB connection and PS/2 connection to the computer. The
> keyboard works but the mouse doesnt.
> 
> I tried to use ums0 device and with moused I tried sysmouse device
> but none makes any effect in X.
> 
> I have found from google that this mouse(or similar) works in netbsd.
> http://starling.us/gus_netbsd/gus_netbsd_logitech_cordless_optical_mouse.html
> 
> The mouse I am talking about is working under windows and in many
> different flavors of Linux!
> 
> Thanks, here is dmesg. Can there be a driver for this mouse that you guys
> forgot to import from netbsd or ? (as you can see that I have even
> recently cvsupped a 5.2-rc2 system but it still didnt solve the problem)
> 
> Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD 5.2-RC2 #0: Mon Dec 22 07:23:48 GMT 2003
>     root at wv1u.freebsd.org:/usr/obj/usr/src/sys/GENERIC
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a33000.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a331f4.
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Pentium II/Pentium II Xeon/Celeron (334.09-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x660  Stepping = 0
> 
> Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
> real memory  = 335478784 (319 MB)
> avail memory = 316243968 (301 MB)
> Pentium Pro MTRR support enabled
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <ABIT   AWRDACPI> on motherboard
> pcibios: BIOS version 2.10
> Using $PIR table, 7 entries at 0xc00fdf00
> acpi0: Power Button (fixed)
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
>     ACPI-1287: *** Error: Method execution failed
> [\\_SB_.PCI0.ISA_.FDC0._CRS] (Node 0xc33ec3c0), AE_AML_UNINITIALIZED_LOCAL
>     ACPI-0175: *** Error: Method execution failed
> [\\_SB_.PCI0.ISA_.FDC0._CRS] (Node 0xc33ec3c0), AE_AML_UNINITIALIZED_LOCAL
> can't fetch resources for \\_SB_.PCI0.ISA_.FDC0 -
> AE_AML_UNINITIALIZED_LOCAL
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
> acpi_cpu0: <CPU> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4000-0x4041,0xcf8-0xcff
> on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib0: slot 7 INTD is routed to irq 11
> pcib0: slot 11 INTA is routed to irq 10
> pcib0: slot 17 INTA is routed to irq 11
> agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem
> 0xd2000000-0xd2ffffff at device 0.0 on pci0
> pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pcib0: slot 1 INTA is routed to irq 12
> pcib1: slot 0 INTA is routed to irq 12
> pci1: <display, VGA> at device 0.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX4 UDMA33 controller> port 0xf000-0xf00f at device 7.1
> on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata0: [MPSAFE]
> ata1: at 0x170 irq 15 on atapci0
> ata1: [MPSAFE]
> uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 11
> at device 7.2 on pci0
> usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> ukbd0: Logitech USB Receiver, rev 1.10/17.00, addr 2, iclass 3/1
> kbd1 at ukbd0
> ums0: Logitech USB Receiver, rev 1.10/17.00, addr 2, iclass 3/1
> ums0: 7 buttons and Z dir.
> pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
> rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem
> 0xd4000000-0xd40000ff irq 10 at device 11.0 on pci0
> rl0: Ethernet address: 00:0a:cd:05:db:36
> miibus0: <MII bus> on rl0
> rlphy0: <RealTek internal media interface> on miibus0
> rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> pci0: <multimedia, audio> at device 17.0 (no driver attached)
> pci0: <input device> at device 17.1 (no driver attached)
> fdc0: cannot reserve I/O port range (1 ports)
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> ppc0 port 0x3bc-0x3c3 irq 7 on acpi0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> fdc0: cannot reserve I/O port range (1 ports)
> orm0: <Option ROMs> at iomem 0xcc000-0xcffff,0xc0000-0xc8fff on isa0
> pmtimer0 on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> fdc0: cannot reserve I/O port range (6 ports)
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounter "TSC" frequency 334092891 Hz quality 800
> Timecounters tick every 10.000 msec
> acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
> GEOM: create disk ad0 dp=0xc34bc460
> ad0: 114498MB <SAMSUNG SV1204H> [232632/16/63] at ata0-master UDMA33
> GEOM: create disk ad1 dp=0xc34bc160
> ad1: 9768MB <ST310212A> [19846/16/63] at ata0-slave UDMA33
> acd0: CDROM <HITACHI CDR-8335> at ata1-slave PIO4
> Mounting root from ufs:/dev/ad1s1a
> 
> _______________________________________________
> freebsd-hackers at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
> To unsubscribe, send any mail to "freebsd-hackers-unsubscribe at freebsd.org"
>