logitech cordless optical mouse problems...

[Evren Yurtesen]

That is not the problem. I get nothing
freebsd:/home/staff/yurtesen#cat /dev/ums0 

its empty

But this is a weird mouse, it has USB connection and then PS/2 connection
also. It doesn't work if the PS/2 connector is not connected! I was
thinking that the mouse maybe shows itself from USB but communicates
through PS/2 connector. The reason I think this is that when I disconnect
PS/2 connector, freebsd still finds ums0 device.

Evren

On Tue, 30 Dec 2003, William Michael Grim wrote:

> A good test is to kill moused on your system and drop into a console.
> Here, do "cat /dev/ums0" and move the mouse around a little bit.  If a
> bunch of random characters begin appearing, your mouse is working just
> fine and you've probably chosen the wrong protocol to use with XFree86.
> With USB mice, you sometimes need to use the "auto" protocol.
> 
> BTW, you can not disable moused on bootup by disabling it in /etc/rc.conf.
> I plan to write a patch or something for this sometime because it's
> annoying.
> 
> Best of luck!
> 
> William Michael Grim
> Student, Southern Illinois University at Edwardsville
> Unix Network Administrator, SIUE, Computer Science dept.
> Phone: (217) 341-6552
> Email: wgrim at siue.edu
> 
> 
> 
> On Tue, 30 Dec 2003, Evren Yurtesen wrote:
> 
> > This mouse has a USB connection and PS/2 connection to the computer. The
> > keyboard works but the mouse doesnt.
> > 
> > I tried to use ums0 device and with moused I tried sysmouse device
> > but none makes any effect in X.
> > 
> > I have found from google that this mouse(or similar) works in netbsd.
> > http://starling.us/gus_netbsd/gus_netbsd_logitech_cordless_optical_mouse.html
> > 
> > The mouse I am talking about is working under windows and in many
> > different flavors of Linux!
> > 
> > Thanks, here is dmesg. Can there be a driver for this mouse that you guys
> > forgot to import from netbsd or ? (as you can see that I have even
> > recently cvsupped a 5.2-rc2 system but it still didnt solve the problem)
> > 
> > Copyright (c) 1992-2003 The FreeBSD Project.
> > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> >         The Regents of the University of California. All rights reserved.
> > FreeBSD 5.2-RC2 #0: Mon Dec 22 07:23:48 GMT 2003
> >     root at wv1u.freebsd.org:/usr/obj/usr/src/sys/GENERIC
> > Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a33000.
> > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a331f4.
> > Timecounter "i8254" frequency 1193182 Hz quality 0
> > CPU: Pentium II/Pentium II Xeon/Celeron (334.09-MHz 686-class CPU)
> >   Origin = "GenuineIntel"  Id = 0x660  Stepping = 0
> > 
> > Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
> > real memory  = 335478784 (319 MB)
> > avail memory = 316243968 (301 MB)
> > Pentium Pro MTRR support enabled
> > npx0: [FAST]
> > npx0: <math processor> on motherboard
> > npx0: INT 16 interface
> > acpi0: <ABIT   AWRDACPI> on motherboard
> > pcibios: BIOS version 2.10
> > Using $PIR table, 7 entries at 0xc00fdf00
> > acpi0: Power Button (fixed)
> > Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> >     ACPI-1287: *** Error: Method execution failed
> > [\\_SB_.PCI0.ISA_.FDC0._CRS] (Node 0xc33ec3c0), AE_AML_UNINITIALIZED_LOCAL
> >     ACPI-0175: *** Error: Method execution failed
> > [\\_SB_.PCI0.ISA_.FDC0._CRS] (Node 0xc33ec3c0), AE_AML_UNINITIALIZED_LOCAL
> > can't fetch resources for \\_SB_.PCI0.ISA_.FDC0 -
> > AE_AML_UNINITIALIZED_LOCAL
> > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
> > acpi_cpu0: <CPU> on acpi0
> > acpi_button0: <Power Button> on acpi0
> > pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4000-0x4041,0xcf8-0xcff
> > on acpi0
> > pci0: <ACPI PCI bus> on pcib0
> > pcib0: slot 7 INTD is routed to irq 11
> > pcib0: slot 11 INTA is routed to irq 10
> > pcib0: slot 17 INTA is routed to irq 11
> > agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem
> > 0xd2000000-0xd2ffffff at device 0.0 on pci0
> > pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> > pci1: <PCI bus> on pcib1
> > pcib0: slot 1 INTA is routed to irq 12
> > pcib1: slot 0 INTA is routed to irq 12
> > pci1: <display, VGA> at device 0.0 (no driver attached)
> > isab0: <PCI-ISA bridge> at device 7.0 on pci0
> > isa0: <ISA bus> on isab0
> > atapci0: <Intel PIIX4 UDMA33 controller> port 0xf000-0xf00f at device 7.1
> > on pci0
> > ata0: at 0x1f0 irq 14 on atapci0
> > ata0: [MPSAFE]
> > ata1: at 0x170 irq 15 on atapci0
> > ata1: [MPSAFE]
> > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 11
> > at device 7.2 on pci0
> > usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
> > usb0: USB revision 1.0
> > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> > uhub0: 2 ports with 2 removable, self powered
> > ukbd0: Logitech USB Receiver, rev 1.10/17.00, addr 2, iclass 3/1
> > kbd1 at ukbd0
> > ums0: Logitech USB Receiver, rev 1.10/17.00, addr 2, iclass 3/1
> > ums0: 7 buttons and Z dir.
> > pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
> > rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem
> > 0xd4000000-0xd40000ff irq 10 at device 11.0 on pci0
> > rl0: Ethernet address: 00:0a:cd:05:db:36
> > miibus0: <MII bus> on rl0
> > rlphy0: <RealTek internal media interface> on miibus0
> > rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> > pci0: <multimedia, audio> at device 17.0 (no driver attached)
> > pci0: <input device> at device 17.1 (no driver attached)
> > fdc0: cannot reserve I/O port range (1 ports)
> > sio0 port 0x3f8-0x3ff irq 4 on acpi0
> > sio0: type 16550A
> > ppc0 port 0x3bc-0x3c3 irq 7 on acpi0
> > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> > ppbus0: <Parallel port bus> on ppc0
> > plip0: <PLIP network interface> on ppbus0
> > lpt0: <Printer> on ppbus0
> > lpt0: Interrupt-driven port
> > ppi0: <Parallel I/O> on ppbus0
> > fdc0: cannot reserve I/O port range (1 ports)
> > orm0: <Option ROMs> at iomem 0xcc000-0xcffff,0xc0000-0xc8fff on isa0
> > pmtimer0 on isa0
> > atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
> > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> > kbd0 at atkbd0
> > fdc0: cannot reserve I/O port range (6 ports)
> > sc0: <System console> at flags 0x100 on isa0
> > sc0: VGA <16 virtual consoles, flags=0x300>
> > sio1: configured irq 3 not in bitmap of probed irqs 0
> > sio1: port may not be enabled
> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> > Timecounter "TSC" frequency 334092891 Hz quality 800
> > Timecounters tick every 10.000 msec
> > acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
> > GEOM: create disk ad0 dp=0xc34bc460
> > ad0: 114498MB <SAMSUNG SV1204H> [232632/16/63] at ata0-master UDMA33
> > GEOM: create disk ad1 dp=0xc34bc160
> > ad1: 9768MB <ST310212A> [19846/16/63] at ata0-slave UDMA33
> > acd0: CDROM <HITACHI CDR-8335> at ata1-slave PIO4
> > Mounting root from ufs:/dev/ad1s1a
> > 
> > _______________________________________________
> > freebsd-hackers at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
> > To unsubscribe, send any mail to "freebsd-hackers-unsubscribe at freebsd.org"
> > 
> 
>