HAL issues

Thu Jul 21 05:18:16 UTC 2011

On Wed, Jul 20, 2011 at 5:53 PM, Joe Marcus Clarke <marcus at freebsd.org> wrote:
> On 7/19/11 5:22 PM, Kevin Oberman wrote:
>> On Tue, Jul 19, 2011 at 1:21 PM, Joe Marcus Clarke <marcus at freebsd.org> wrote:
>>> On 7/19/11 3:32 PM, Kevin Oberman wrote:
>>>> I know HAL is probably on its last legs, but it still frustrates me on
>>>> a regular basis.
>>>>
>>>> As of the current ports (updated yesterday), it works pretty well, but
>>>> I am having a couple
>>>> of annoying issues. One is with a filesystem that hald does not see.
>>>>
>>>> First is a geli encrypted UFS system that hald simply does not see.
>>>> When I connect the
>>>> drive, I see devd reporting:
>>>> !system=DEVFS subsystem=CDEV type=CREATE cdev=usb/0.4.0
>>>> !system=DEVFS subsystem=CDEV type=CREATE cdev=ugen0.4
>>>> !system=DEVFS subsystem=CDEV type=CREATE cdev=usb/0.4.1
>>>> !system=DEVFS subsystem=CDEV type=CREATE cdev=usb/0.4.2
>>>> +ugen0.4 at port=2 vendor=0x0bc2 product=0x2300 devclass=0x00
>>>> devsubclass=0x00 sernum="2GH5KM5P    " release=0x0130 on ugen0.2
>>>> !system=USB subsystem=DEVICE type=ATTACH ugen=ugen0.4 cdev=ugen0.4
>>>> vendor=0x0bc2 product=0x2300 devclass=0x00 devsubclass=0x00
>>>> sernum="2GH5KM5P    " release=0x0130 mode=host port=2 parent=ugen0.2
>>>> !system=USB subsystem=INTERFACE type=ATTACH ugen=ugen0.4 cdev=ugen0.4
>>>> vendor=0x0bc2 product=0x2300 devclass=0x00 devsubclass=0x00
>>>> sernum="2GH5KM5P    " release=0x0130 mode=host interface=0 endpoints=2
>>>> intclass=0x08 intsubclass=0x06 intprotocol=0x50
>>>> +umass0 vendor=0x0bc2 product=0x2300 devclass=0x00 devsubclass=0x00
>>>> sernum="2GH5KM5P    " release=0x0130 mode=host intclass=0x08
>>>> intsubclass=0x06 intprotocol=0x50  at bus=2 hubaddr=2 port=0 devaddr=4
>>>> interface=0 vendor=0x0bc2 product=0x2300 devclass=0x00
>>>> devsubclass=0x00 sernum="2GH5KM5P    " release=0x0130 mode=host
>>>> intclass=0x08 intsubclass=0x06 intprotocol=0x50  on uhub3
>>>> !system=DEVFS subsystem=CDEV type=CREATE cdev=pass2
>>>> !system=DEVFS subsystem=CDEV type=CREATE cdev=da0
>>>> !system=DEVFS subsystem=CDEV type=CREATE cdev=da0s1
>>>> !system=DEVFS subsystem=CDEV type=CREATE cdev=da0s2
>>>> !system=DEVFS subsystem=CDEV type=CREATE cdev=da0s3
>>>> !system=DEVFS subsystem=CDEV type=CREATE cdev=msdosfs/MUSICBACKUP
>>>> !system=DEVFS subsystem=CDEV type=CREATE cdev=msdosfs/MUSIC2BCKUP
>>>> !system=DEVFS subsystem=CDEV type=CREATE cdev=da0s3.eli
>>>> !system=DEVFS subsystem=CDEV type=CREATE cdev=da0s3.elid
>>>> !system=DEVFS subsystem=CDEV type=CREATE cdev=ufsid/4bdb229f7dfac54e
>>>> !system=DEVFS subsystem=CDEV type=CREATE cdev=ufs/Auxbak
>>>>
>>>> Then I attach the geli encrypted slice and devd reports:
>>>> !system=DEVFS subsystem=CDEV type=CREATE cdev=da0s3.elid
>>>> !system=DEVFS subsystem=CDEV type=CREATE cdev=ufsid/4bdb229f7dfac54e
>>>> !system=DEVFS subsystem=CDEV type=CREATE cdev=ufs/Auxbak
>>>> but lshal only shows:
>>>> udi = '/org/freedesktop/Hal/devices/volume_size_533779542016'
>>>>   block.device = '/dev/da0s3.eli'  (string)
>>>>   [...]
>>>> with no 'd' partition and no ufs entry. As a result, it does not get
>>>> mounted. I can mount it
>>>> manually fine, so there is no FS issue, I've even triggered a
>>>> re-taste, but it still is missing.
>>>>
>>>> I'm probably going to have to build hald with debug to track this
>>>> down, but I thought I'd
>>>> ask for any suggestions of what to look for or how best to debug it.
>>>
>>> You need to provide the additional information documented at
>>> http://www.freebsd.org/gnome/docs/halfaq.html#q4 .
>>
>> Sorry, Joe. Only the hald verbose log really looks interesting. It's
>> attached. It
>> sees all of the devd CREATE events, but seems to do nothing with the
>> /dev/da0s3.elid one, though it does check on the status of the other
>> file systems.
>>
>> hald was started at 13:56. At 13:57:06 I plugged in the USB drive. At 13:57:33
>> I attached the geli device (/dev/da0s3.eli).
>>
>> Here are the results of the other commands:
>>> sysctl -b kern.geom.conftxt
>> 0 DISK da0 750156374016 512 hd 255 sc 63
>> 1 PART da0s3 533779545600 512 i 3 o 216374215680 ty freebsd xs MBR xt 165
>> 2 ELI da0s3.eli 533779542016 4096
>> 3 PART da0s3.elid 533779533824 4096 i 4 o 8192 ty !0 xs BSD xt 0
>> 4 LABEL ufs/Auxbak 533779533824 4096 i 0 o 0
>> 4 LABEL ufsid/4bdb229f7dfac54e 533779533824 4096 i 0 o 0
>> 1 PART da0s2 136358691840 512 i 2 o 80015523840 ty !12 xs MBR xt 12
>> 2 LABEL msdosfs/MUSIC2BCKUP 136358691840 512 i 0 o 0
>> 1 PART da0s1 80015491584 512 i 1 o 32256 ty !12 xs MBR xt 12
>> 2 LABEL msdosfs/MUSICBACKUP 80015491584 512 i 0 o 0
>> 0 DISK cd0 0 2048 hd 0 sc 0
>> 0 DISK ada0 320072933376 512 hd 1 sc 63
>> 1 PART ada0s4 16777216000 512 i 4 o 303294316544 ty ntfs xs MBR xt 7
>> 2 LABEL ntfs/Lenovo_Recovery 16777216000 512 i 0 o 0
>> 1 PART ada0s3 188743661056 512 i 3 o 114550636544 ty freebsd xs MBR xt 165
>> 2 PART ada0s3f 177167400960 512 i 6 o 11136925696 ty freebsd-ufs xs BSD xt 7
>> 3 LABEL ufs/usr 177167400960 512 i 0 o 0
>> 2 PART ada0s3e 536870912 512 i 5 o 10600054784 ty freebsd-ufs xs BSD xt 7
>> 3 LABEL ufs/temp 536870912 512 i 0 o 0
>> 2 PART ada0s3d 5231345664 512 i 4 o 5368709120 ty freebsd-ufs xs BSD xt 7
>> 3 LABEL ufs/var 5231345664 512 i 0 o 0
>> 2 PART ada0s3b 4294967296 512 i 2 o 1073741824 ty freebsd-swap xs BSD xt 1
>> 3 LABEL label/swap 4294966784 512 i 0 o 0
>> 2 PART ada0s3a 1073741824 512 i 1 o 0 ty freebsd-ufs xs BSD xt 7
>> 3 LABEL ufs/root 1073741824 512 i 0 o 0
>> 1 PART ada0s2 113291296768 512 i 2 o 1259339776 ty ntfs xs MBR xt 7
>> 2 LABEL ntfs/Windows7_OS 113291296768 512 i 0 o 0
>> 1 PART ada0s1 1258291200 512 i 1 o 1048576 ty ntfs xs MBR xt 7
>> 2 LABEL ntfs/SYSTEM_DRV 1258291200 512 i 0 o 0
>> 0 MD md0 33927168 512 u 0 s 512 f 0 fs 0 l 33927168 t vnode file
>> /usr/home/oberman/Desktop/Downloads/8auj09uc.iso
>> 1 LABEL iso9660/8auj09us 33927168 512 i 0 o 0
>> rogue> cat /etc/fstab
>> # Device      Mountpoint              FStype  Options         Dump    Pass#
>> /dev/label/swap       none                    swap    sw              0       0
>> /dev/ufs/root /                       ufs     rw              1       1
>> /dev/ufs/temp /tmp                    ufs     rw              2       2
>> /dev/ufs/usr  /usr                    ufs     rw              2       2
>> /dev/ufs/var  /var                    ufs     rw              2       2
>> #/dev/ad4s2   /C                      ntfs    ro              0       0
>> #/dev/acd0    /cdrom                  cd9660  ro,noauto       0       0
>> proc          /proc                   procfs  rw              0       0
>> fdescfs               /dev/fd                 fdescfs rw              0       0
>> linproc               /compat/linux/proc      linprocfs rw            0       0
>> rogue> ck-list-sessions
>> Session1:
>>       unix-user = '9381'
>>       realname = 'Kevin Oberman'
>>       seat = 'Seat2'
>>       session-type = ''
>>       active = FALSE
>>       x11-display = ':0'
>>       x11-display-device = '/dev/ttyv8'
>>       display-device = 'ttyv0'
>>       remote-host-name = ''
>>       is-local = FALSE
>>       on-since = '2011-07-18T23:17:23.124124Z'
>>       login-session-id = ''
>
> Give this patch a shot.
>
> http://www.marcuscom.com/downloads/patch-hald_freebsd_hf-storage.c

Thanks, Joe. That did it. All three file systems now mount as they should.
Please feel free to commit. I'm sure that others have hit this, too, although
it is a rather odd case.
-- 
R. Kevin Oberman, Network Engineer - Retired
E-mail: kob6558 at gmail.com