I've played around with gdesklets (patch included for
interested parties)
Jeremy Messenger
mezz7 at cox.net
Sat Sep 6 18:20:18 PDT 2003
On Sat, 06 Sep 2003 20:11:53 -0500, Jeremy Messenger <mezz7 at cox.net> wrote:
> On Sun, 7 Sep 2003 01:05:46 +0200, Alexander Leidinger
> <Alexander at Leidinger.net> wrote:
>
>> On Sat, 06 Sep 2003 14:05:33 -0500
>> Jeremy Messenger <mezz7 at cox.net> wrote:
>>
<snip>
> <snip>
>> My suggestions:
>> - remove post-extract & do-patch
>> - add do-build and run Install... from there (technically it's an
>> extraction, but you can also think about it as "creating the files
>> you want to install in WRKSRC", so do-build applies)
>> - for "network" only: rename the __init__.py patch (no "patch-" at
>> the beginning, patch it by hand in do-build after running Install...
>
> Thanks, that's good idea! I like it and I have changed it, so here's an
> attach of it.
<snip>
Ahh, forget about previous attach because it has old patch (should be
popen -> os.popen) in it. Here's yet another attach that has the update
patch.
Cheers,
Mezz
--
bsdforums.org 's moderator, mezz.
-------------- next part --------------
# This is a shell archive. Save it in a file, remove anything before
# this line, and then unpack it by entering "sh file". Note, it may
# create directories; files and directories will be owned by you and
# have default permissions.
#
# This archive contains:
#
# gdesklets-network
# gdesklets-network/distinfo
# gdesklets-network/Makefile
# gdesklets-network/files
# gdesklets-network/files/patch-Install_Network_Sensor.bin
# gdesklets-network/files/Network::__init__.py
# gdesklets-network/pkg-plist
# gdesklets-network/pkg-message
# gdesklets-network/pkg-descr
#
echo c - gdesklets-network
mkdir -p gdesklets-network > /dev/null 2>&1
echo x - gdesklets-network/distinfo
sed 's/^X//' >gdesklets-network/distinfo << 'END-of-gdesklets-network/distinfo'
XMD5 (Network-0.1.4.tar.bz2) = d65cc4a3b62d0a29c4635693f62dcb76
END-of-gdesklets-network/distinfo
echo x - gdesklets-network/Makefile
sed 's/^X//' >gdesklets-network/Makefile << 'END-of-gdesklets-network/Makefile'
X# New ports collection makefile for: gdesklets-network
X# Date created: 02 September 2003
X# Whom: Mezz <mezz7 at cox.net>
X#
X# $FreeBSD$
X#
X
XPORTNAME= gdesklets-network
XPORTVERSION= 0.1.4
XCATEGORIES= net gnome
XMASTER_SITES= http://gdesklets.gnomedesktop.org/files/
XDISTNAME= Network-${PORTVERSION}
X
XMAINTAINER= mezz7 at cox.net
XCOMMENT= The configurator allows to choose the interface to monitor network
X
XBUILD_DEPENDS= ${X11BASE}/libdata/pkgconfig/gdesklets-core.pc:${PORTSDIR}/deskutils/gdesklets
XRUN_DEPENDS= ${X11BASE}/libdata/pkgconfig/gdesklets-core.pc:${PORTSDIR}/deskutils/gdesklets
X
XUSE_BZIP2= yes
XUSE_X_PREFIX= yes
XNAME= Network
X
Xdo-build:
X @${WRKSRC}/Install_${NAME}_Sensor.bin --nomsg ${WRKSRC}
X @${PATCH} ${WRKSRC}/${NAME}/__init__.py < ${FILESDIR}/${NAME}::__init__.py
X @${FIND} ${WRKSRC} -name '*.orig' -delete
X
Xdo-install:
X @${CP} -Rp ${WRKSRC}/${NAME} ${PREFIX}/share/gnome/gdesklets/Sensors/
X @${CP} ${WRKSRC}/README ${PREFIX}/share/gnome/gdesklets/Sensors/${NAME}/
X
Xpost-install:
X @${CAT} ${PKGMESSAGE}
X
X.include <bsd.port.mk>
END-of-gdesklets-network/Makefile
echo c - gdesklets-network/files
mkdir -p gdesklets-network/files > /dev/null 2>&1
echo x - gdesklets-network/files/patch-Install_Network_Sensor.bin
sed 's/^X//' >gdesklets-network/files/patch-Install_Network_Sensor.bin << 'END-of-gdesklets-network/files/patch-Install_Network_Sensor.bin'
X--- Install_Network_Sensor.bin.orig Sat Sep 6 13:07:37 2003
X+++ Install_Network_Sensor.bin Sat Sep 6 13:08:05 2003
X@@ -75,15 +75,9 @@
X else:
X cmd = "mkdir -p %(destination)s; cd %(destination)s; " \
X "LANG=C tar -xzvf %(tmp)s 2>&1"
X- fail, out = commands.getstatusoutput(cmd % vars())
X+ commands.getstatusoutput(cmd % vars())
X os.unlink(tmp)
X
X- if (fail):
X- if (no_message): print ERROR_TAR + out
X- else: message(ERROR_TAR + out, "error")
X- sys.exit(1)
X-
X- print out
X if (not list_only):
X if (no_message): print SUCCESS
X else: message(SUCCESS, "info")
END-of-gdesklets-network/files/patch-Install_Network_Sensor.bin
echo x - gdesklets-network/files/Network::__init__.py
sed 's/^X//' >gdesklets-network/files/Network::__init__.py << 'END-of-gdesklets-network/files/Network::__init__.py'
X--- Network/__init__.py.orig Sat Sep 6 13:10:12 2003
X+++ Network/__init__.py Sat Sep 6 13:15:17 2003
X@@ -18,7 +18,7 @@
X
X class Network(Sensor):
X
X- def __init__(self, interface = "eth0", interval = "1000"):
X+ def __init__(self, interface = "lo0", interval = "1000"):
X
X global _; _ = i18n.Translator("memory-sensor")
X
X@@ -45,7 +45,7 @@
X self._add_thread(self.__command_thread)
X
X
X- fd = open("/proc/net/dev", "r")
X+ fd = os.popen("ifconfig -a | grep mtu", "r")
X data = fd.read()
X fd.close()
X data = data.splitlines()
X@@ -60,7 +60,7 @@
X continue
X
X def __get_net_ip(self,device) :
X- fd = open("/proc/net/arp", "r")
X+ fd = os.popen("ifconfig " + device, "r")
X data = fd.read()
X fd.close()
X lines = data.splitlines()
X@@ -69,24 +69,22 @@
X l = l.strip()
X fields = l.split()
X
X- if fields[5]==device:
X- return fields[0]
X+ if fields[0]=="inet":
X+ return fields[1]
X
X return "(no ip for this interface)"
X
X def __get_net_in_out(self,device) :
X- fd = open("/proc/net/dev", "r")
X+ fd = os.popen("netstat -b -I " + device + " | grep Link", "r")
X data = fd.read()
X fd.close()
X lines = data.splitlines()
X
X for l in lines[:]:
X l = l.strip()
X- l = l.replace(":"," ")
X fields = l.split()
X
X- if fields[0]==device:
X- return int(fields[1]),int(fields[9])
X+ return int(fields[6]),int(fields[8])
X
X print "device not found"
X return 0,0
END-of-gdesklets-network/files/Network::__init__.py
echo x - gdesklets-network/pkg-plist
sed 's/^X//' >gdesklets-network/pkg-plist << 'END-of-gdesklets-network/pkg-plist'
Xshare/gnome/gdesklets/Sensors/Network/README
Xshare/gnome/gdesklets/Sensors/Network/__init__.py
X at dirrm share/gnome/gdesklets/Sensors/Network
END-of-gdesklets-network/pkg-plist
echo x - gdesklets-network/pkg-message
sed 's/^X//' >gdesklets-network/pkg-message << 'END-of-gdesklets-network/pkg-message'
X##
XTo view the README, do the command following:
X
X cat ${PREFIX}/share/gnome/gdesklets/Sensors/${name}/README
X
XThis is just a sensor, to actually see the data it collects, you have to install
Xan appropriate display plugin.
X##
END-of-gdesklets-network/pkg-message
echo x - gdesklets-network/pkg-descr
sed 's/^X//' >gdesklets-network/pkg-descr << 'END-of-gdesklets-network/pkg-descr'
XThe configurator allows to choose the interface to monitor, the update
Xinterval, and to enable or disable the format change for In/Out.
X
XAvailable data : 'in', 'out', 'speed_in', 'speed_out', 'speed_in_max',
X'speed_out_max', 'speed_in_percent', 'speed_out_percent', 'ip', and
X'interface'.
X
XWWW: http://gdesklets.gnomedesktop.org
END-of-gdesklets-network/pkg-descr
exit
More information about the freebsd-gnome
mailing list