ulpt can't attach Lexmark E120

[George Mitchell]

As I was saying a few minutes ago ...

On 01/27/13 17:32, George Mitchell wrote:
> On 01/27/13 14:07, Hans Petter Selasky wrote:
>> [...]  I need output when hw.usb.ulpt.debug=15 to say exactly.
>> Could you
>> ask the provider of the binaries to compile having USB_DEBUG set, also
>> for the
>> modules.
>>
>> --HPS
>>
>
> I'm working on getting a debug build ...  Thanks for your help so far.
> I notice that there seem to be only trivial differences between the 9.1
> release ulpt and the 10.0 current ulpt driver.              -- George

(This is on a Raspberry Pi.)  It took me a bit longer than anticipated,
but here is the output, from an image built over last weekend:

-------------- next part --------------
Aug 22 11:15:09 pi kernel: ugen0.5: <Lexmark International> at usbus0
Aug 22 11:15:09 pi kernel: ulpt_probe: 
Aug 22 11:15:09 pi kernel: ulpt_probe: 
Aug 22 11:15:09 pi kernel: ulpt_attach: sc=0xc2d43800
Aug 22 11:15:09 pi kernel: ulpt0: <Lexmark International Lexmark E120n, class 0/0, rev 2.00/1.00, addr 5> on usbus0
Aug 22 11:15:09 pi kernel: ulpt_attach: setting alternate config number: 0
Aug 22 11:15:09 pi kernel: ulpt_attach: error=USB_ERR_INVAL
Aug 22 11:15:09 pi kernel: ulpt_detach: sc=0xc2d43800
Aug 22 11:15:09 pi kernel: device_attach: ulpt0 attach returned 12