bwi(4) BCM4315 support?

[Ian FREISLICH]

"M. Warner Losh" wrote:
> In message: <19e9a5dc0909180646g1e2a2e50wde781a16523bc743 at mail.gmail.co=
> m>
>             Gonzalo Nemmi <gnemmi at gmail.com> writes:
> : On Fri, Sep 18, 2009 at 4:36 AM, Ian Freislich <ianf at clue.co.za> wrot=
> e:
> : =
> 
> : > Hi
> : >
> : > I have the following card:
> : >
> : > bwi0 at pci0:1:0:0:        class=3D0x028000 card=3D0x1508103c chip=3D0=
> x431514e4
> : > rev=3D0x01 hdr=3D0x00
> : >    vendor     =3D 'Broadcom Corporation'
> : >    device     =3D 'Broadcom Wireless b/g (BCM4315/BCM22062000)'
> : >    class      =3D network
> : >
> : > By playing a little bit with the if_bwi source, I've managed to get=
> 
> : > it detected to this point, but I obviously don't know what I'm
> : > doing:
> : >
> : > bwi0: <Broadcom BCM4315 802.11b/g Wireless Lan> mem 0xfeafc000-0xfe=
> afffff
> : > irq 16 at device 0.0 on pci1
> : > bwi0: [ITHREAD]
> : > bwi0: BBP: id 0x4312, rev 0x1, pkg 0
> : > bwi0: MAC: rev 15
> : > bwi0: PHY: type 5, rev 1, ver 6
> : > bwi0: RF: manu 0x17f, type 0x0002, rev 0
> : > bwi0: only BCM2050 RF is supported for 11G PHY
> : > device_attach: bwi0 attach returned 6
> : >
> : > Is there any thing I can try?  Is there support on the horizon or
> : > should I try and replace it with a supported card?
> 
> I've also been working with paradox to understand his patch set and to
> integrate it into the tree...
>
> However, did you load the firmware, as described in the bwi man page:

No, I missed that, but it doesn't help.

Ian

--
Ian Freislich