Asus A8V hangs during pci probe on fresh -CURRENT

[Vladimir Kushnir]

On Sat, 4 Nov 2006, John-Mark Gurney wrote:

> Vladimir Kushnir wrote this message on Sat, Nov 04, 2006 at 05:30 +0200:
>>
>>
>> On Fri, 3 Nov 2006, John-Mark Gurney wrote:
>>
>>> Vladimir Kushnir wrote this message on Sat, Nov 04, 2006 at 00:49 +0200:
>>>>
>>>>
>>>> On Thu, 2 Nov 2006, John-Mark Gurney wrote:
>>>>
<Not wanting to waste bandwidth>
>>
>> pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
>> pcib1:		secondary bus		5
>> pcib1:		subordinate bus		5
>> pcib1:		I/O decode		0xf0000-0xfff
>> pcib1:		memory decode		0xca000000-0xca0fffff
>> pcib1:		prefetched decode	0xca100000-0xca1fffff
>> pcib1:		Subtractively decoded bridge
>> pci5:  <ACPI PCI bus> on pcib1
>> pci5:  physical bus=5
>>
>> and here system hangs.
>
> Ok, then add a couple printfs to the pci_read_vpd_reg line...  one before
> the WREG line, and another before the return... I have a feeling that
> your card isn't setting the correct bit, as the printf you enabled w/
> if 1 won't run unless it gets data from this function...  If you're
> hanging in this function, then I'll have to do something else... :(  or
> you could return the card/mobo as not PCI compliant...  but I doubt
> you'd want to do the last one..
:-)
>
Ok. Sorry for a delay. One thing before I'll try to do that. This hang 
does seem to be relating to vpd commit - everything boots/runs perfectly 
all right with pci.c rev. 1.292.2.9 (after some compilation-relating 
tweaks, of course).

Regards,
Vladimir