Asus A8V hangs during pci probe on fresh -CURRENT
John-Mark Gurney
gurney_j at resnet.uoregon.edu
Sat Nov 4 20:14:23 UTC 2006
Vladimir Kushnir wrote this message on Sat, Nov 04, 2006 at 05:30 +0200:
>
>
> On Fri, 3 Nov 2006, John-Mark Gurney wrote:
>
> >Vladimir Kushnir wrote this message on Sat, Nov 04, 2006 at 00:49 +0200:
> >>
> >>
> >>On Thu, 2 Nov 2006, John-Mark Gurney wrote:
> >>
> >>>Vladimir Kushnir wrote this message on Thu, Oct 26, 2006 at 02:27 +0300:
> >>>>Is there anything I could do to help fixing this?
> >>>
> >>>This is likely related to the vpd work that I've done recently...
> >>>
> >>>Attached is a patch that may fix your troubles. (I'll commit it shortly
> >>>once I've tested it on my own systems.)
> >>>
> >>
> >>Unfortunately, it does not help at all - system hangs at precisely the
> >>same point :-(
> >
> >in src/sys/dev/pci.c, at about line 583, in the function pci_read_vpd,
> >there is #if 0, change it to #if 1, and send me the first few hundred
> >lines of what it prints...
> >
> >That'll help me figure out where it's hanging..
> >
>
> Sorry I'v no serial console so the only lines I can provide are the very
> last ones; and they don't seem to relate to vpd (they are the same for
> ANY changes - with or without patch, with "#if 0" or "#if 1", for GENERIC
> or my custom kernel etc):
>
> pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
> pcib1: secondary bus 5
> pcib1: subordinate bus 5
> pcib1: I/O decode 0xf0000-0xfff
> pcib1: memory decode 0xca000000-0xca0fffff
> pcib1: prefetched decode 0xca100000-0xca1fffff
> pcib1: Subtractively decoded bridge
> pci5: <ACPI PCI bus> on pcib1
> pci5: physical bus=5
>
> and here system hangs.
Ok, then add a couple printfs to the pci_read_vpd_reg line... one before
the WREG line, and another before the return... I have a feeling that
your card isn't setting the correct bit, as the printf you enabled w/
if 1 won't run unless it gets data from this function... If you're
hanging in this function, then I'll have to do something else... :( or
you could return the card/mobo as not PCI compliant... but I doubt
you'd want to do the last one..
--
John-Mark Gurney Voice: +1 415 225 5579
"All that I will do, has been done, All that I have, has not."
More information about the freebsd-current
mailing list