<SOLEVD> Rocketport uPCI ioaddr mapping failed under FreeBSD-5.3&CURRENT

[wsk]

> On Monday 24 January 2005 04:25 am, wsk wrote:
>> hi,folks:
>>
>>   after installed RocketPort uPCI card into my box;it
>> dumps the follow eror msgs:
>>
>> rp0: <RocketPort PCI> port 0xde00-0xdeff,0xdd80-0xddff mem
>> 0xfcedff80-0xfcedffff
>> irq 19 at device 10.0 on pci2
>> rp0: failed: rid 0x10 is memory, requested 4
>> rp0: ioaddr mapping failed for RocketPort(PCI).
>> device_attach: rp0 attach returned 6
>
> Looks like you need to change the driver to map its io addresses from a
> different BAR for this chip ID since BAR 0 is memory, not I/O.  I'm not
> sure
> this driver will work with this card, btw, but you can try changing this
> line
> in the attach function of sys/dev/rp/rp_pci.c:
>
>         ctlp->io_rid[0] = 0x10;
>
> to use either '0x14' or '0x18' rather than '0x10' and see if it >works.

  It must use '0x18' . or the driver can't map the ports:
here'is my boot mesgs by set '0x14'
Feb  5 16:21:20 wsk kernel: rp0: <RocketPort PCI> port
0xde00-0xdeff,0xdd80-0xddff mem 0xfcedff80-0xfcedffff irq 19 at device
10.0 on pci2
Feb  5 16:21:20 wsk kernel: RocketPort0 (Version 3.02) 0 ports.
and after set '0x18'. the boot mesgs:
Feb  5 16:47:59 wsk kernel: rp0: <RocketPort PCI> port
0xde00-0xdeff,0xdd80-0xddff mem 0xfcedff80-0xfcedffff irq 19 at device
10.0 on pci2
Feb  5 16:47:59 wsk kernel: RocketPort0 (Version 3.02) 8 ports.
and thanks again


-----------------------------------------
This email was sent using FREE Catholic Online Webmail!
http://webmail.catholic.org/