Rocketport uPCI ioaddr mapping failed under FreeBSD-5.3&CURRENT
wsk
wsk at catholic.org
Fri Feb 4 18:13:26 PST 2005
> On Monday 24 January 2005 04:25 am, wsk wrote:
>> hi,folks:
>>
>> after installed RocketPort uPCI card into my box;it
>> dumps the follow eror msgs:
>>
>> rp0: <RocketPort PCI> port 0xde00-0xdeff,0xdd80-0xddff mem
>> 0xfcedff80-0xfcedffff
>> irq 19 at device 10.0 on pci2
>> rp0: failed: rid 0x10 is memory, requested 4
>> rp0: ioaddr mapping failed for RocketPort(PCI).
>> device_attach: rp0 attach returned 6
>
> Looks like you need to change the driver to map its io addresses from a
> different BAR for this chip ID since BAR 0 is memory, not I/O. I'm not
> sure
> this driver will work with this card, btw, but you can try changing this
> line
> in the attach function of sys/dev/rp/rp_pci.c:
>
> ctlp->io_rid[0] = 0x10;
>
> to use either '0x14' or '0x18' rather than '0x10' and see if it works.
>
>> and pciconfig the rp0:
>> rp0 at pci2:10:0: class=0x078000 card=0x080511fe chip=0x080511fe rev=0x01
>> hdr=0x00
>> vendor = 'Comtrol Corp'
>> class = simple comms
yep.It seems work excellent !and thank u very much
-----------------------------------------
This email was sent using FREE Catholic Online Webmail!
http://webmail.catholic.org/
More information about the freebsd-current
mailing list