Compiling u-boot-rpi3 on an rpi3

[James Shuriff]

Copy /usr/local/share/u-boot/u-boot-rpi3/u-boot.bin to /boot/msdos.

- James Shuriff

-----Original Message-----
From: owner-freebsd-arm at freebsd.org <owner-freebsd-arm at freebsd.org> On Behalf Of bob prohaska
Sent: Monday, May 6, 2019 2:05 PM
To: Mika??l Urankar <mikael.urankar at gmail.com>
Cc: freebsd-arm at freebsd.org; freebsd-ports at freebsd.org
Subject: Re: Compiling u-boot-rpi3 on an rpi3

On Mon, May 06, 2019 at 06:20:45PM +0200, Mika??l Urankar wrote:
> Le lun. 6 mai 2019 ?? 17:19, bob prohaska <fbsd at www.zefox.net> a ??crit :
> >
> > On Mon, May 06, 2019 at 03:22:31PM +0200, Mika??l Urankar wrote:
> > >
> > > It builds fine here on aarch64, do you have security/openssl* installed?
> > >
> >
> > Yes, security/openssl is installed. I didn't use it by default
> > because of earlier reports of trouble. The system reminds me that
>
> Delete it and rebuild u-boot-rpi3
>

That certainly helped, make now runs successfully.

But, make install didn't update anything in /boot/msdos.
There seem to be three copies of u-boot-bin floating around, with identical size. Should I copy one manually to /boot/msdos, and does it matter which one?

Thanks for reading and your help!

bob prohaska

_______________________________________________
freebsd-arm at freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-arm
To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
________________________________
 DISCLAIMER: This message and any attachments are intended solely for the use of the recipient and may contain confidential information. If you have received this message in error please delete it and promptly notify the sender, James Shuriff (james at opentech.cc<mailto:james at opentech.cc>).