PINE64+ Release APs, APs not started

Fri Jul 28 07:16:02 UTC 2017

On 07/27/2017 18:34, Henri Hennebert wrote:
> On 07/27/2017 17:02, Emmanuel Vadot wrote:
>> On Thu, 27 Jul 2017 15:57:40 +0100
>> Andrew Turner <andrew at fubar.geek.nz> wrote:
>>
>>>
>>>> On 27 Jul 2017, at 15:43, Emmanuel Vadot <manu at bidouilliste.com> wrote:
>>>>
>>>> On Thu, 27 Jul 2017 14:31:18 +0200
>>>> Henri Hennebert <hlh at restart.be <mailto:hlh at restart.be>> wrote:
>>>>> I think that the DTB is wrong.
>>>>>
>>>>> Note that my kernel config have:
>>>>>
>>>>> options         FDT                     # Flattened Device Tree bus 
>>>>> driver
>>>>> options         FDT_DTB_STATIC          # Statically embed a DTB file
>>>>> into a kernel image
>>>>> makeoptions     FDT_DTS_FILE=pine64_plus.dts
>>>>
>>>> FDT_DTB_STATIC shouldn't be used unless you *exactly* know what you're
>>>> doing. Please use GENERIC kernel on ARM64.
> 
> I will remove it from my kernel config.
> 

I retry with your u-boot:

U-Boot SPL 2017.07-00011-g41b31da7ca-dirty (Jul 27 2017 - 07:37:57)
DRAM: 2048 MiB
Trying to boot from MMC1

 >> FreeBSD EFI boot block
    Loader path: /boot/loader.efi

    Initializing modules: ZFS UFS
    Probing 5 block devices.......* done
     ZFS found no pools
     UFS found 1 partition
Consoles: EFI console
Command line arguments: loader.efi
Image base: 0xb6dbd008
EFI version: 2.05
EFI Firmware: Das U-boot (rev 0.00)

FreeBSD/arm64 EFI loader, Revision 1.1
(Tue Jul 25 03:58:20 CEST 2017 root at norquay.restart.bel)
EFI boot environment
Loading /boot/defaults/loader.conf
/boot/kernel/kernel text=0x71e548 data=0x9cc80+0x39e6a6 
syms=[0x8+0xf6d80+0x8+0xeaf3b]
/boot/entropy size=0x1000
/boot/kernel/zfs.ko text=0x7a418 text=0xdc390 data=0x11528+0x9e970 
syms=[0x8+0x1ddd8+0x8+0x18d38]
/boot/kernel/opensolaris.ko text=0x1358 text=0xd90 data=0x10160+0x125d0 
syms=[0x8+0x1020+0x8+0x8ca]

Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Using DTB provided by EFI at 0x48000000.
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #0 r321371M: Thu Jul 27 19:52:17 CEST 2017
     root at norquay.restart.bel:/usr/obj/usr/src/sys/NORQUAY arm64
FreeBSD clang version 5.0.0 (trunk 308421) (based on LLVM 5.0.0svn)
VT: init without driver.
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
clk_fixed0: <Fixed clock> on ofwbus0
clk_fixed1: <Fixed clock> on ofwbus0
clk_fixed2: <Fixed clock> on ofwbus0
simplebus0: <Flattened device tree simple bus> on ofwbus0
aw_ccung0: <Allwinner Clock Control Unit NG> mem 0x1c20000-0x1c203ff on 
simplebus0
aw_ccung0: Cannot set parent to pll_ddr for dram
regfix0: <Fixed Regulator> on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
awusbphy0: <Allwinner USB PHY> mem 
0x1c19400-0x1c19413,0x1c1a800-0x1c1a803,0x1c1b800-0x1c1b803 on simplebus0
gic0: <ARM Generic Interrupt Controller> mem 
0x1c81000-0x1c81fff,0x1c82000-0x1c83fff,0x1c84000-0x1c85fff,0x1c86000-0x1c87fff 
irq 210
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 224
gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq 
10,11,12 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <Allwinner GPIO/Pinmux controller> mem 0x1f02c00-0x1f02fff irq 24 
on simplebus0
gpiobus1: <OFW GPIO bus> on gpio1
generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
rtc0: <Allwinner RTC> mem 0x1f00000-0x1f00053 irq 22,23 on simplebus0
rtc0: registered as a time-of-day clock, resolution 1.000000s
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
a10_mmc0: <Allwinner Integrated MMC/SD controller> mem 
0x1c0f000-0x1c0ffff irq 4 on simplebus0
mmc0: <MMC/SD bus> on a10_mmc0
ohci0: <Generic OHCI Controller> mem 0x1c1b400-0x1c1b4ff irq 9 on simplebus0
usbus0 on ohci0
gpioc0: <GPIO controller> on gpio0
uart0: <16750 or compatible> mem 0x1c28000-0x1c283ff irq 13 on simplebus0
uart0: console (115384,n,8,1)
gpioc1: <GPIO controller> on gpio1
awg0: <Allwinner Gigabit Ethernet> mem 
0x1c30000-0x1c31fff,0x1c00030-0x1c00033 irq 25 on simplebus0
miibus0: <MII bus> on awg0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, w
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, w
awg0: Ethernet address: 02:ba:cf:46:d5:39
cryptosoft0: <software crypto>
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <Generic OHCI root HUB> at usbus0
uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
device_attach: uhub0 attach returned 6
usbus0: Root HUB problem, error=USB_ERR_NO_ROOT_HUB
mmcsd0: 16GB <SDHC SL16G 8.0 SN A9A41D45 MFG 03/2017 by 3 SD> at mmc0 
50.0MHz/4bit/65535-block
Release APs
APs not started
CPU  0: ARM Cortex-A53 r0p4 affinity:  0
  Instruction Set Attributes 0 = <AES+PMULL,SHA1,SHA2,CRC32>
  Instruction Set Attributes 1 = <0>
          Processor Features 0 = <AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
          Processor Features 1 = <0>
       Memory Model Features 0 = <4k Granule,64k 
Granule,MixedEndian,S/NS Mem,16bit ASID,1TB PA>
       Memory Model Features 1 = <>
              Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6 
Breakpoints,PMUv3,Debug v8>
              Debug Features 1 = <0>
          Auxiliary Features 0 = <0>
          Auxiliary Features 1 = <0>
CPU  1: (null) (null) r0p0 affinity:  0
CPU  2: (null) (null) r0p0 affinity:  0
CPU  3: (null) (null) r0p0 affinity:  0
   x0: ffff000000967f00
   x1: fffffd0ø

But the Release APs don't work.

I retry with the old u-boot and the Release APs don't work either.

With your u-boot and r320599 (with the embeded DTB) I get the same 
strange boot as before (no aw_ccung). So the embeded DTB is the culprit.

Henri