Paid Support for iMX6 Port

[Michel Kohanim]

Hi Russell,

Thanks SO so very much. This is quite helpful and especially the section on "Other build tricks" is quite fantastic!


With kind regards,

******************************
  Michel Kohanim
  CEO
 
  (p) 818.631.0333
  (f)  818.436.0702
  http://www.universal-devices.com 
******************************

-----Original Message-----
From: Russell Haley [mailto:russ.haley at gmail.com] 
Sent: Thursday, August 4, 2016 11:22 PM
To: Michel Kohanim <michel at universal-devices.com>
Cc: freebsd-arm <freebsd-arm at freebsd.org>
Subject: Re: Paid Support for iMX6 Port

On Tue, Aug 2, 2016 at 4:02 PM, Michel Kohanim <michel at universal-devices.com> wrote:
> Hi Russell,
>
> Thanks so very much. I have already been there many times.

Okay here is roughly everything that I have up to this point. I haven't built an entire sd card in a while so there are lots of errors and omissions (and a couple to-dos).

https://github.com/RussellHaley/RussellsCode/wiki/FreeBSD-and-Freescale-IMX6

This is shaping up to be a second installment of what I was thinking could be an article on Freescale IMX6 and FreeBSD. I thought I would submit it to the FreeBSD journal or BSD Magazine (thoughts anyone?). I know it's all on the wiki in various forms, but I've built this information up myself before I knew about the wiki entries so I consider it original content (as also stated in my Github wiki entry).
Anyway, repeating this stuff and getting exposure for the project isn't a bad idea (especially if it prompts someone to look at the sata driver for me!!!).

Cheers,

Russ

> -----Original Message-----
> From: Russell Haley [mailto:russ.haley at gmail.com]
> Sent: Tuesday, August 2, 2016 3:30 PM
> To: freebsd-arm <freebsd-arm at freebsd.org>; Michel Kohanim 
> <michel at universal-devices.com>
> Subject: Re: Paid Support for iMX6 Port
>
> On Tue, Aug 2, 2016 at 3:16 PM, Russell Haley <russ.haley at gmail.com> wrote:
>> Sorry, reply instead of reply all...
>>
>>
>> ---------- Forwarded message ----------
>> From: Russell Haley <russ.haley at gmail.com>
>> Date: Tue, Aug 2, 2016 at 3:16 PM
>> Subject: Re: Paid Support for iMX6 Port
>> To: Michel Kohanim <michel at universal-devices.com>
>>
>>
>> On Tue, Aug 2, 2016 at 2:39 PM, Michel Kohanim 
>> <michel at universal-devices.com> wrote:
>>> Hi Russell,
>
>> Give me a few days, I just got back from vacation and kids don't 
>> sleep well during summer hours so I have very limited time right now, 
>> but I will get you what I have so far.
>
> Most of what you need is here:
>
> https://wiki.freebsd.org/FreeBSD/arm/crossbuild
>
> and even specifies the right kernel conf!
>
> Russ