panic: arm_unmask_irq [was: Re: TI platforms code update: switching to vendor FDT data]

[Ian Lepore]

On Sun, 2015-05-24 at 18:12 -0700, Oleksandr Tymoshenko wrote:
> > On May 24, 2015, at 5:52 PM, Marcel Moolenaar <marcel at xcllnt.net> wrote:
> > 
> > 
> >> On May 24, 2015, at 5:44 PM, Oleksandr Tymoshenko <gonzo at freebsd.org> wrote:
> >> 
> >> 
> >>> On May 24, 2015, at 5:31 PM, Marcel Moolenaar <marcel at xcllnt.net> wrote:
> >>> 
> >>> 
> >>>> On May 24, 2015, at 5:12 PM, Oleksandr Tymoshenko <gonzo at FreeBSD.org> wrote:
> >>>> 
> >>>> 
> >>>> ti_scm and ti_pinmux should be detected right after simplebus.
> >>>> Could you make sure if dtb loaded by u-boot is not
> >>>> from previous builds? You can decompile it using dtc:
> >>>> dtc -I dtb -O dts beaglebone-black.dtb
> >>> 
> >>> I’m pretty sure that’s not possible, since I’ve never built ARM
> >>> kernels in this particular VM before :-)
> >>> 
> >>> From the fdt command in the loader I can see it’s the first device
> >>> mentioned, so that’s not it.
> >>> 
> >>> loader> fdt ls
> >>> Using DTB provided by U-Boot at address 0x80000100.
> >>> 
> >>> /am335x
> >>> /am335x/interrupt-controller at 48200000
> >>> /am335x/pmu
> >>> /am335x/scm at 44e10000
> >>> /am335x/prcm at 44E00000
> >>> /am335x/dmtimers at 44E05000
> >>> /am335x/rtc at 44E3E000
> >>> /am335x/adc at 44E0D000
> >>> /am335x/wdt1 at 44E35000
> >>> /am335x/gpio
> >>> 	*snip*
> >> 
> >> This one is definitely from previous (FreeBSD's own) version of dts,
> >> not TI provided one. There is no dmtimers node in new data.
> >> How did you create SD card image?
> >> 
> > 
> > Installed from a snapshot (a while back) and then upgraded the kernel
> > with make installkernel.
> > 
> > So the DTB/DTS on the FAT slice is FreeBSD’s?
> 
> Yes, they're from before my commit. I tried to maintain backward compatibility
> but it just wasn't possible. You need to generate new dtb files and place them
> on FAT partition. You can also install sys/modules/dtb/am335x to SD card and
> set U-boot fdt_file env variable to beaglebone-black.dtb and loader should be
> able to find this file and load it. I've never used this approach myself, but it should work
> with recent ubldr I think. 

ubldr has been loading dtb files from the ufs filesystem for over a year
(maybe close to two years).  crochet hasn't caught up with some of the
changes.

-- Ian