dmesg on RaspberryPi Type B+

[Paul Mather]

On Jul 26, 2014, at 12:09 AM, YAMAMOTO Shigeru <shigeru at os-hackers.jp> wrote:

> 
> Hi, all,
> 
> I get a New RaspberryPi, RaspberryPi Type B+.
> 
> I make new SD image and I test it on RaspberryPi Type B+.
> There is no problem.
> My SD images is at http://freebsd-current.os-hackers.jp/pub/FreeBSD/snapshots/20140725/raspberry-pi/
> 
> Next, I test newest SD image at
> http://ftp.freebsd.org/pub/FreeBSD/snapshots/arm/armv6/ISO-IMAGES/11.0/FreeBSD-11.0-CURRENT-arm-armv6-RPI-B-20140701-r268111.img.bz2.
> It can't detect USB Ethernet device.

As I understand it, the Raspberry Pi Model B+ has more USB ports and 
uses a slightly different USB controller to the regular Model A and 
Model B.  I know Linux Raspberry Pi distributions have required updates 
to run on the Model B+.  I guess FreeBSD will need a tweak, too.

Cheers,

Paul.

> It seems me to need change firmware to newer at,
> https://github.com/raspberrypi/firmware
> 
> Thanks,
> ---
> YAMAMOTO Shigeru <shigeru at os-hackers.jp>
> KDB: debugger backends: ddb
> KDB: current backend: ddb
> Copyright (c) 1992-2014 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 11.0-CURRENT #0 r269079M: Fri Jul 25 13:39:57 JST 2014
>    root at nemesis.os-hackers.jp:/root/rpi/build/work/obj/arm.armv6/root/rpi/build/work/src/sys/RPI-B-VIMAGE arm
> FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
> VT: init without driver.
> CPU: ARM1176JZ-S rev 7 (ARM11J core)
> Supported features: ARM_ISA THUMB2 JAZELLE ARMv4 Security_Ext
> WB enabled LABT branch prediction enabled
>  16KB/32B 4-way instruction cache
>  16KB/32B 4-way write-back-locking-C data cache
> real memory  = 536866816 (511 MB)
> avail memory = 498728960 (475 MB)
> WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
> random: <Software, Yarrow> initialized
> kbd0 at kbdmux0
> ofwbus0: <Open Firmware Device Tree>
> simplebus0: <Flattened device tree simple bus> mem 0x20000000-0x20ffffff on ofwbus0
> intc0: <BCM2835 Interrupt Controller> mem 0xb200-0xb3ff on simplebus0
> systimer0: <BCM2835 System Timer> mem 0x3000-0x3fff irq 8,9,10,11 on simplebus0
> Event timer "BCM2835 Event Timer 3" frequency 1000000 Hz quality 1000
> Timecounter "BCM2835 Timecounter" frequency 1000000 Hz quality 1000
> bcmwd0: <BCM2708/2835 Watchdog> mem 0x10001c-0x100027 on simplebus0
> gpio0: <BCM2708/2835 GPIO controller> mem 0x200000-0x2000af irq 57,59,58,60 on simplebus0
> gpio0: ACT LED at gpio0, pin 16
> gpio0: read-only pins: 46,47,48,49,50,51,52,53.
> gpio0: reserved pins: 48,49,50,51,52,53.
> gpioc0: <GPIO controller> on gpio0
> gpiobus0: <OFW GPIO bus> on gpio0
> gpioled0: <GPIO led> at pin(s) 16 on gpiobus0
> iichb0: <BCM2708/2835 BSC controller> mem 0x205000-0x20501f irq 61 on simplebus0
> iicbus0: <OFW I2C bus> on iichb0
> iic0: <I2C generic I/O> on iicbus0
> iichb1: <BCM2708/2835 BSC controller> mem 0x804000-0x80401f irq 61 on simplebus0
> iicbus1: <OFW I2C bus> on iichb1
> iic1: <I2C generic I/O> on iicbus1
> spi0: <BCM2708/2835 SPI controller> mem 0x204000-0x20401f irq 62 on simplebus0
> spibus0: <OFW SPI bus> on spi0
> bcm_dma0: <BCM2835 DMA Controller> mem 0x7000-0x7fff,0xe05000-0xe05fff irq 24,25,26,27,28,29,30,31,32,33,34,35,36 on simplebus0
> mbox0: <BCM2835 VideoCore Mailbox> mem 0xb880-0xb8bf irq 1 on simplebus0
> sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x300000-0x3000ff irq 70 on simplebus0
> mmc0: <MMC/SD bus> on sdhci_bcm0
> uart0: <PrimeCell UART (PL011)> mem 0x201000-0x201fff irq 65 on simplebus0
> uart0: console (115200,n,8,1)
> dwcotg0: <DWC OTG 2.0 integrated USB controller> mem 0x980000-0x99ffff irq 17 on simplebus0
> usbus0 on dwcotg0
> fb0: <BCM2835 VT framebuffer driver> on ofwbus0
> simplebus1: <Flattened device tree simple bus> on ofwbus0
> simplebus1: could not get ranges
> device_attach: simplebus1 attach returned 6
> Timecounters tick every 10.000 msec
> usbus0: 480Mbps High Speed USB v2.0
> ugen0.1: <DWCOTG> at usbus0
> uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
> uhub0: 1 port with 1 removable, self powered
> ugen0.2: <vendor 0x0424> at usbus0
> uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus0
> uhub1: MTT enabled
> mmcsd0: 2GB <SD 00000 1.0 SN 3420118712 MFG 05/2014 by 27 SM> at mmc0 25.0MHz/1bit/65535-block
> fb0: 656x416(0x0 at 0,0) 16bpp
> fb0: pitch 1312, base 0x5f005000, screen_size 545792
> fbd0 on fb0
> VT: initialize with new VT driver "fb".
> random: unblocking device.
> Root mount waiting for: usbus0
> uhub1: 5 ports with 4 removable, self powered
> Root mount waiting for: usbus0
> ugen0.3: <vendor 0x0424> at usbus0
> smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
> Trying to mount root from ufs:/dev/ufs/root20140725 [rw,noatime]...
> smsc0: chip 0xec00, rev. 0002
> WARNING: / was not properly dismounted
> miibus0: <MII bus> on smsc0
> ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
> ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> ue0: <USB Ethernet> on smsc0
> ue0: Ethernet address: b8:27:eb:50:ce:e0
> warning: no time-of-day clock registered, system time will not be set accurately
> gpio0: tern on ACT LED
> smsc0: chip 0xec00, rev. 0002
> _______________________________________________
> freebsd-arm at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"