dmesg on RaspberryPi Type B+

Sat Jul 26 04:26:08 UTC 2014

Hi, all,

I get a New RaspberryPi, RaspberryPi Type B+.

I make new SD image and I test it on RaspberryPi Type B+.
There is no problem.
My SD images is at http://freebsd-current.os-hackers.jp/pub/FreeBSD/snapshots/20140725/raspberry-pi/

Next, I test newest SD image at
http://ftp.freebsd.org/pub/FreeBSD/snapshots/arm/armv6/ISO-IMAGES/11.0/FreeBSD-11.0-CURRENT-arm-armv6-RPI-B-20140701-r268111.img.bz2.
It can't detect USB Ethernet device.
It seems me to need change firmware to newer at,
https://github.com/raspberrypi/firmware

Thanks,
---
YAMAMOTO Shigeru <shigeru at os-hackers.jp>
-------------- next part --------------
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r269079M: Fri Jul 25 13:39:57 JST 2014
    root at nemesis.os-hackers.jp:/root/rpi/build/work/obj/arm.armv6/root/rpi/build/work/src/sys/RPI-B-VIMAGE arm
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT: init without driver.
CPU: ARM1176JZ-S rev 7 (ARM11J core)
 Supported features: ARM_ISA THUMB2 JAZELLE ARMv4 Security_Ext
 WB enabled LABT branch prediction enabled
  16KB/32B 4-way instruction cache
  16KB/32B 4-way write-back-locking-C data cache
real memory  = 536866816 (511 MB)
avail memory = 498728960 (475 MB)
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
random: <Software, Yarrow> initialized
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> mem 0x20000000-0x20ffffff on ofwbus0
intc0: <BCM2835 Interrupt Controller> mem 0xb200-0xb3ff on simplebus0
systimer0: <BCM2835 System Timer> mem 0x3000-0x3fff irq 8,9,10,11 on simplebus0
Event timer "BCM2835 Event Timer 3" frequency 1000000 Hz quality 1000
Timecounter "BCM2835 Timecounter" frequency 1000000 Hz quality 1000
bcmwd0: <BCM2708/2835 Watchdog> mem 0x10001c-0x100027 on simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0x200000-0x2000af irq 57,59,58,60 on simplebus0
gpio0: ACT LED at gpio0, pin 16
gpio0: read-only pins: 46,47,48,49,50,51,52,53.
gpio0: reserved pins: 48,49,50,51,52,53.
gpioc0: <GPIO controller> on gpio0
gpiobus0: <OFW GPIO bus> on gpio0
gpioled0: <GPIO led> at pin(s) 16 on gpiobus0
iichb0: <BCM2708/2835 BSC controller> mem 0x205000-0x20501f irq 61 on simplebus0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
iichb1: <BCM2708/2835 BSC controller> mem 0x804000-0x80401f irq 61 on simplebus0
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
spi0: <BCM2708/2835 SPI controller> mem 0x204000-0x20401f irq 62 on simplebus0
spibus0: <OFW SPI bus> on spi0
bcm_dma0: <BCM2835 DMA Controller> mem 0x7000-0x7fff,0xe05000-0xe05fff irq 24,25,26,27,28,29,30,31,32,33,34,35,36 on simplebus0
mbox0: <BCM2835 VideoCore Mailbox> mem 0xb880-0xb8bf irq 1 on simplebus0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x300000-0x3000ff irq 70 on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
uart0: <PrimeCell UART (PL011)> mem 0x201000-0x201fff irq 65 on simplebus0
uart0: console (115200,n,8,1)
dwcotg0: <DWC OTG 2.0 integrated USB controller> mem 0x980000-0x99ffff irq 17 on simplebus0
usbus0 on dwcotg0
fb0: <BCM2835 VT framebuffer driver> on ofwbus0
simplebus1: <Flattened device tree simple bus> on ofwbus0
simplebus1: could not get ranges
device_attach: simplebus1 attach returned 6
Timecounters tick every 10.000 msec
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <DWCOTG> at usbus0
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub0: 1 port with 1 removable, self powered
ugen0.2: <vendor 0x0424> at usbus0
uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus0
uhub1: MTT enabled
mmcsd0: 2GB <SD 00000 1.0 SN 3420118712 MFG 05/2014 by 27 SM> at mmc0 25.0MHz/1bit/65535-block
fb0: 656x416(0x0 at 0,0) 16bpp
fb0: pitch 1312, base 0x5f005000, screen_size 545792
fbd0 on fb0
VT: initialize with new VT driver "fb".
random: unblocking device.
Root mount waiting for: usbus0
uhub1: 5 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <vendor 0x0424> at usbus0
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
Trying to mount root from ufs:/dev/ufs/root20140725 [rw,noatime]...
smsc0: chip 0xec00, rev. 0002
WARNING: / was not properly dismounted
miibus0: <MII bus> on smsc0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: Ethernet address: b8:27:eb:50:ce:e0
warning: no time-of-day clock registered, system time will not be set accurately
gpio0: tern on ACT LED
smsc0: chip 0xec00, rev. 0002