Unable to copy DTB into module directory

[Alie Tan]

On Fri, Feb 22, 2013 at 7:56 PM, Alie Tan <alie at affle.com> wrote:

> On Fri, Feb 22, 2013 at 7:48 PM, Alie Tan <alie at affle.com> wrote:
>
>> On Fri, Feb 22, 2013 at 2:17 PM, Tim Kientzle <tim at kientzle.com> wrote:
>>
>>>
>>> On Feb 21, 2013, at 10:07 PM, Tim Kientzle wrote:
>>>
>>> > On Feb 21, 2013, at 9:50 PM, Alie Tan wrote:
>>> >>
>>> >> I just built RasPi image and keeps getting this message:
>>> >>
>>> >> "unable to copy DTB into module directory"
>>> >>
>>> >> then the raspi reboot again and again.
>>> >
>>> > Try backing out r247045 and see if that fixes
>>> > it for you.
>>> >
>>> > Also try breaking into the U-Boot prompt
>>> > and entering
>>>
>>> Sorry, left out some steps here.  (To clarify, this is a separate
>>> experiment to be done with an image that includes
>>> r247045).  The instructions should say:
>>>
>> Fyi, Reverting r247045 didn't help my proble :-(
>>
> Sorry for incomplete information. Reverting r247045 removes "unable to
> copy DTB into module directory" error message but my raspi still keeps
> rebooting after bootloader
>
Removing WITH_ARM_EABI="YES" solved my problem

>
>>>   1) Remove the "fdt addr 0x100" command from loader.rc
>>>
>>>   2) Early in boot, break to the U-Boot prompt (hit any key during the
>>> 3-second countdown)
>>>
>>>  3) Enter these two commands to U-Boot
>>>
>>>   U-Boot> fdt addr 0x100
>>>   U-Boot> run bootcmd
>>>
>>> This way, U-Boot will identify the FDT and ubldr will
>>> get it from U-Boot (instead of ubldr accessing it
>>> directly).
>>>
>>> Tim
>>>
>>>
>>
>