[saurbier: 5.3-BETA1 on ES40 (go) and AS1200 (no go)]
Konstantin Saurbier
saurbier at mathematik.uni-bielefeld.de
Mon Aug 30 10:52:43 PDT 2004
Hi Wilko,
Konstantin Saurbier wrote on Thu Aug 26, 2004 um 05:47:43PM:
> Tests on AS1200, AS255 and a DS10 will follow in the next few days.
I have attached the boot message, the output from srm show config and
show device for the ES40. No Problems so far. You can add the ES40 in
dual cpu configuration to your list. Oh yes the the errors with the da2
disc are no FreeBSD problems, seems to be a faulty disc.
I suggest to add the em driver (for Intel gigabit ethernet cards) to
the GENERIC kernel.
The AS1200 doesn't boot, boot message and srm show config and show
device are also attached.
I will try to test the BETA1 on the AS255 and an AS1000A tomorrow.
--
Viele Gruesse,
Konstantin Saurbier
------------------------------------------------------
Konstantin Saurbier Tel.: 0521 106 3861
Computerlabor Mathematik U5-138
Universitaet Bielefeld Universitaetsstr.25
33501 Bielefeld
email: saurbier at mathematik.uni-bielefeld.de
------------------------------------------------------
-------------- next part --------------
P00>>>boot dka0 -flags ''
(boot dka0.0.0.4.1)
block 0 of dka0.0.0.4.1 is a valid boot block
reading 15 blocks from dka0.0.0.4.1
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 1e00(7680)
initializing HWRPB at 2000
initializing page table at 3fb56000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Loading /boot/loader
Console: SRM firmware console
VMS PAL rev: 0x4000300010160
OSF PAL rev: 0x400040002015a
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM disk boot, Revision 1.2
(root at ds10.wbnet, Mon Aug 23 08:53:02 UTC 2004)
Memory: 1048576 k
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x5babf0+0x4d140 syms=[0x8+0x68e20+0x8+0x55872]
Hit [Enter] to boot immediately, or any other key for command prompt.
Type '?' for a list of commands, 'help' for more detailed help.
OK boot -v
Entering /boot/kernel/kernel at 0xfffffc0000347100...
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 5.3-BETA1 #0: Mon Aug 23 22:50:09 UTC 2004
root at ds10.wbnet:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc00009ca000.
ST6600
AlphaServer ES40, 500MHz
8192 byte page size, 2 processors.
CPU: EV6 (21264) major=8 minor=4 extensions=0x303<BWX,FIX,MVI,PRECISE>
OSF PAL rev: 0x400040002015a
real memory = 1066745856 (1017 MB)
Physical memory chunk(s):
0x009ec000 - 0x3ec31fff, 1042571264 bytes (127267 pages)
avail memory = 1035706368 (987 MB)
smp_start_secondary: starting cpu 1
smp_start_secondary: cpu 1 started
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory>
pchip0:
wsba[0].reg = 0x800000
wsm[0].reg = 0x700000
tba[0].reg = 0x0
wsba[1].reg = 0x80000001
wsm[1].reg = 0x3ff00000
tba[1].reg = 0x0
wsba[2].reg = 0xc0000001
wsm[2].reg = 0x3ff00000
tba[2].reg = 0x40000000
wsba[3].reg = 0x0
wsm[3].reg = 0x0
tba[3].reg = 0x0
pchip1:
wsba[0].reg = 0x800000
wsm[0].reg = 0x700000
tba[0].reg = 0x0
wsba[1].reg = 0x80000001
wsm[1].reg = 0x3ff00000
tba[1].reg = 0x0
wsba[2].reg = 0xc0000001
wsm[2].reg = 0x3ff00000
tba[2].reg = 0x40000000
wsba[3].reg = 0x0
wsm[3].reg = 0x0
tba[3].reg = 0x0
tsunami0: <21271 Core Logic chipset>
pcib0: <21271 PCI host bus adapter> on tsunami0
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 4, range 32, base 00010000, size 7, enabled
map[14]: type 1, range 32, base 010a1000, size 7, enabled
found-> vendor=0x1011, dev=0x0019, revid=0x30
bus=0, slot=1, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x14 (5000 ns), maxlat=0x28
(10000 ns)
intpin=a, irq=8
map[10]: type 1, range 32, base 01040000, size 17, enabled
map[14]: type 1, range 32, base 01060000, size 17, enabled
map[18]: type 4, range 32, base 00010080, size 5, enabled
found-> vendor=0x8086, dev=0x1008, revid=0x02
bus=0, slot=3, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0xfc (7560 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0
ns)
intpin=a, irq=16
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
found-> vendor=0x10b9, dev=0x1533, revid=0xc3
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x3200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 000100b0, size 4, enabled
found-> vendor=0x10b9, dev=0x5229, revid=0xc1
bus=0, slot=15, func=0
class=01-01-fa, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0xff (7650 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000
ns)
intpin=a, irq=238
map[10]: type 1, range 32, base 010a0000, size 12, enabled
found-> vendor=0x10b9, dev=0x5237, revid=0x03
bus=0, slot=19, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000
ns)
intpin=a, irq=234
dc0: <Intel 21143 10/100BaseTX> port 0x10000-0x1007f mem
0x10a1000-0x10a107f irq 8 at device 1.0 on pci0
dc0: Reserved 0x80 bytes for rid 0x10 type 4 at 0x10000
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
dc0: Ethernet address: 08:00:2b:c3:90:35
dc0: interrupting at TSUNAMI irq 8
dc0: [GIANT-LOCKED]
pci0: <network, ethernet> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AcerLabs Aladdin UDMA33 controller> port
0x100b0-0x100bf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 238 at device
15.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x100b0
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=00 ostat1=00
ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0-slave: stat=0x00 err=0x04 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata0: interrupting at ISA irq 14
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: interrupting at ISA irq 15
ata1: [MPSAFE]
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem
0x10a0000-0x10a0fff irq 234 at device 19.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x10a0000
ohci0: interrupting at ISA irq 10
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
pcib1: <21271 PCI host bus adapter> on tsunami0
pci1: <PCI bus> on pcib1
pci1: physical bus=0
map[10]: type 4, range 32, base 00010000, size 8, enabled
map[14]: type 1, range 32, base 01022000, size 8, enabled
map[18]: type 1, range 32, base 01020000, size 12, enabled
found-> vendor=0x1000, dev=0x000c, revid=0x02
bus=0, slot=4, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x1e (7500 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=36
map[10]: type 4, range 32, base 00001000, size 8, enabled
map[14]: type 1, range 32, base 01021000, size 12, enabled
found-> vendor=0x1077, dev=0x1020, revid=0x05
bus=0, slot=5, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=40
sym0: <895> port 0x10000-0x100ff mem
0x1020000-0x1020fff,0x1022000-0x10220ff irq 36 at device 4.0 on pci1
sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0x1022000
sym0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x1020000
sym0: Delay (GEN=11): 244 msec, 36427 KHz
sym0: Delay (GEN=11): 227 msec, 39155 KHz
sym0: Delay (GEN=11): 227 msec, 39155 KHz
sym0: chip clock is 39155KHz
sym0: clock multiplier assumed
sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 07/4e/80/01/08/24
sym0: Delay (GEN=11): 248 msec, 35840 KHz
sym0: Delay (GEN=11): 283 msec, 31407 KHz
sym0: Delay (GEN=11): 282 msec, 31518 KHz
sym0: interrupting at TSUNAMI irq 36
sym0: [GIANT-LOCKED]
sym0: enabling clock multiplier
sym0: Downloading SCSI SCRIPTS.
Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.8
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x1000-0x10ff mem
0x1021000-0x1021fff irq 40 at device 5.0 on pci1
isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0x1021000
isp0: using Memory space register mapping
isp0: interrupting at TSUNAMI irq 40
isp0: [GIANT-LOCKED]
isp0: Differential Mode
isp0: Ultra Mode Capable
isp0: Board Type 1040B, Chip Revision 0x5, loaded F/W Revision 4.66.0
isp0: Last F/W revision was 5.57.1
isp0: 243 max I/O commands supported
isp0: Initiator ID is 7 on Channel 0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
atkbd0: interrupting at ISA irq 1
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0061
kbdc: TEST_AUX_PORT status:0001
psm0: strange result for test aux port (1).
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0001
psm: keyboard port failed.
psm0: failed to reset the aux device.
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
Calibrating clock(s) ... PCC clock: 499981137 Hz (firmware 500000000 Hz)
i8254 clock: 1193174 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
ppc0: using extended I/O port range
ppc0: <Parallel port> failed to probe at port 0x3bc-0x3c3 irq 7 on isa0
sc0: no video adapter found.
sc0: <System console> failed to probe on isa0
sio0: irq maps: 0x4005 0x4015 0x4005 0x4005
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1: irq maps: 0x4005 0x400d 0x4005 0x4005
sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
vga0: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
procfs registered
Timecounter "i8254" frequency 1193182 Hz quality 0
Timecounters tick every 0.976 msec
lo0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ATAPI_RESET time = 1370us
ata0-master: setting PIO4 on AcerLabs Aladdin chip
acd0: <COMPAQ CDR-8435/0013> CDROM drive at ata0 as master
acd0: read 5512KB/s (5512KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
sym0: enabling clock multiplier
sym0: Downloading SCSI SCRIPTS.
isp0: driver initiated bus reset of bus 0
(probe0:sym0:0:0:0): Retrying Command
(probe1:sym0:0:1:0): Retrying Command
(probe2:sym0:0:2:0): Retrying Command
(probe3:sym0:0:3:0): Retrying Command
(probe15:isp0:0:0:0): Retrying Command
(probe0:isp0:0:0:1): Retrying Command
pass0 at sym0 bus 0 target 0 lun 0
pass0: <COMPAQ BB01813467 3B07> Fixed Direct Access SCSI-2 device
pass0: Serial Number 3BM0Q66Z000071155DAS
pass0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged
Queueing Enabled
pass1 at sym0 bus 0 target 1 lun 0
pass1: <COMPAQ BB01813467 3B07> Fixed Direct Access SCSI-2 device
pass1: Serial Number 3BM0PXD200007114GQRP
pass1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged
Queueing Enabled
pass2 at sym0 bus 0 target 2 lun 0
pass2: <DEC RZ2ED-LS (C) DEC 0306> Fixed Direct Access SCSI-2 device
pass2: Serial Number LKB4614600002932094D
pass2: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged
Queueing Enabled
pass3 at sym0 bus 0 target 3 lun 0
pass3: <DEC RZ2ED-LS (C) DEC 0306> Fixed Direct Access SCSI-2 device
pass3: Serial Number LKC1037600002939H1M6
pass3: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged
Queueing Enabled
pass4 at isp0 bus 0 target 0 lun 0
pass4: <DEC HSZ22 (C) DEC D11V> Fixed Direct Access SCSI-2 device
pass4: Serial Number 000000019198050e02070d28c8510500
GEOM: new disk da0
GEOM: new disk da1
GEOM: new disk da2
GEOM: new disk da3
GEOM: new disk da4
GEOM: new disk da5
pass4: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged
Queueing Enabled
pass5 at isp0 bus 0 target 0 lun 1
pass5: <DEC HSZ22 (C) DEC D11V> Fixed Direct Access SCSI-2 device
pass5: Serial Number 000000019198050e02070f00ca6a0001
pass5: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged
Queueing Enabled
da0 at sym0 bus 0 target 0 lun 0
da0: <COMPAQ BB01813467 3B07> Fixed Direct Access SCSI-2 device
da0: Serial Number 3BM0Q66Z000071155DAS
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da0: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C)
da1 at sym0 bus 0 target 1 lun 0
da1: <COMPAQ BB01813467 3B07> Fixed Direct Access SCSI-2 device
da1: Serial Number 3BM0PXD200007114GQRP
da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da1: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C)
da4 at isp0 bus 0 target 0 lun 0
da4: <DEC HSZ22 (C) DEC D11V> Fixed Direct Access SCSI-2 device
da4: Serial Number 000000019198050e02070d28c8510500
da4: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da4: 69440MB (142213120 512 byte sectors: 255H 63S/T 8852C)
da5 at isp0 bus 0 target 0 lun 1
da5: <DEC HSZ22 (C) DEC D11V> Fixed Direct Access SCSI-2 device
da5: Serial Number 000000019198050e02070f00ca6a0001
da5: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da5: 69440MB (142213120 512 byte sectors: 255H 63S/T 8852C)
(da2:sym0:0:2:0): Retrying Command
da3 at sym0 bus 0 target 3 lun 0
da3: <DEC RZ2ED-LS (C) DEC 0306> Fixed Direct Access SCSI-2 device
da3: Serial Number LKC1037600002939H1M6
da3: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing
Enabled
da3: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C)
release_aps: releasing secondary CPUs
SMP: AP CPU #1 Launched!
(da2:sym0:0:2:0): Retrying Command
(da2:sym0:0:2:0): Retrying Command
GEOM: Configure da0a, start 0 length 1073741824 end 1073741823
GEOM: Configure da0b, start 1073741824 length 2147483648 end 3221225471
GEOM: Configure da0c, start 0 length 18209320960 end 18209320959
GEOM: Configure da0d, start 3221225472 length 14988095488 end
18209320959
(da2:sym0:0:2:0): Retrying Command
(da2:sym0:0:2:0): error 5
(da2:sym0:0:2:0): Unretryable Error
da2 at sym0 bus 0 target 2 lun 0
da2: <DEC RZ2ED-LS (C) DEC 0306> Fixed Direct Access SCSI-2 device
da2: Serial Number LKB4614600002932094D
da2: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing
Enabled
da2: Attempt to query device size failed: MEDIUM ERROR, Medium format
corrupted
GEOM: Configure da1b, start 0 length 2147483648 end 2147483647
GEOM: Configure da1c, start 0 length 18209320960 end 18209320959
GEOM: Configure da1d, start 2147483648 length 16061837312 end
18209320959
(da2:sym0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:sym0:0:2:0): CAM Status: SCSI Status Error
(da2:sym0:0:2:0): SCSI Status: Check Condition
(da2:sym0:0:2:0): MEDIUM ERROR asc:31,0
(da2:sym0:0:2:0): Medium format corrupted field replaceable unit: c
(da2:sym0:0:2:0): (da2:sym0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0
0 0
(da2:sym0:0:2:0): MEDIUM ERROR asc:31,0
(da2:sym0:0:2:0): Medium format corrupted field replaceable unit: c
Retrying Command (per Sense Data)
(da2:sym0:0:2:0): Retrying Command
(da2:sym0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:sym0:0:2:0): CAM Status: SCSI Status Error
(da2:sym0:0:2:0): SCSI Status: Check Condition
(da2:sym0:0:2:0): MEDIUM ERROR asc:31,0
(da2:sym0:0:2:0): Medium format corrupted field replaceable unit: c
(da2:sym0:0:2:0): (da2:sym0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0
0 0
(da2:sym0:0:2:0): MEDIUM ERROR asc:31,0
(da2:sym0:0:2:0): Medium format corrupted field replaceable unit: c
Retrying Command (per Sense Data)
(da2:sym0:0:2:0): Retrying Command
(da2:sym0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:sym0:0:2:0): CAM Status: SCSI Status Error
(da2:sym0:0:2:0): SCSI Status: Check Condition
(da2:sym0:0:2:0): MEDIUM ERROR asc:31,0
(da2:sym0:0:2:0): Medium format corrupted field replaceable unit: c
(da2:sym0:0:2:0): (da2:sym0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0
0 0
(da2:sym0:0:2:0): MEDIUM ERROR asc:31,0
(da2:sym0:0:2:0): Medium format corrupted field replaceable unit: c
Retrying Command (per Sense Data)
(da2:sym0:0:2:0): Retrying Command
(da2:sym0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:sym0:0:2:0): CAM Status: SCSI Status Error
(da2:sym0:0:2:0): SCSI Status: Check Condition
(da2:sym0:0:2:0): MEDIUM ERROR asc:31,0
(da2:sym0:0:2:0): Medium format corrupted field replaceable unit: c
(da2:sym0:0:2:0): (da2:sym0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0
0 0
(da2:sym0:0:2:0): MEDIUM ERROR asc:31,0
(da2:sym0:0:2:0): Medium format corrupted field replaceable unit: c
Retrying Command (per Sense Data)
(da2:sym0:0:2:0): Retrying Command
(da2:sym0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:sym0:0:2:0): CAM Status: SCSI Status Error
(da2:sym0:0:2:0): SCSI Status: Check Condition
(da2:sym0:0:2:0): MEDIUM ERROR asc:31,0
(da2:sym0:0:2:0): Medium format corrupted field replaceable unit: c
(da2:sym0:0:2:0): (da2:sym0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0
0 0
(da2:sym0:0:2:0): MEDIUM ERROR asc:31,0
(da2:sym0:0:2:0): Medium format corrupted field replaceable unit: c
Retries Exhausted
(da2:sym0:0:2:0): error 5
(da2:sym0:0:2:0): Unretryable Error
Opened disk da2 -> 5
(da2:sym0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:sym0:0:2:0): CAM Status: SCSI Status Error
(da2:sym0:0:2:0): SCSI Status: Check Condition
(da2:sym0:0:2:0): MEDIUM ERROR asc:31,0
(da2:sym0:0:2:0): Medium format corrupted field replaceable unit: c
(da2:sym0:0:2:0): (da2:sym0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0
0 0
(da2:sym0:0:2:0): MEDIUM ERROR asc:31,0
(da2:sym0:0:2:0): Medium format corrupted field replaceable unit: c
Retrying Command (per Sense Data)
(da2:sym0:0:2:0): Retrying Command
(da2:sym0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:sym0:0:2:0): CAM Status: SCSI Status Error
(da2:sym0:0:2:0): SCSI Status: Check Condition
(da2:sym0:0:2:0): MEDIUM ERROR asc:31,0
(da2:sym0:0:2:0): Medium format corrupted field replaceable unit: c
(da2:sym0:0:2:0): (da2:sym0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0
0 0
(da2:sym0:0:2:0): MEDIUM ERROR asc:31,0
(da2:sym0:0:2:0): Medium format corrupted field replaceable unit: c
Retrying Command (per Sense Data)
(da2:sym0:0:2:0): Retrying Command
(da2:sym0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:sym0:0:2:0): CAM Status: SCSI Status Error
(da2:sym0:0:2:0): SCSI Status: Check Condition
(da2:sym0:0:2:0): MEDIUM ERROR asc:31,0
(da2:sym0:0:2:0): Medium format corrupted field replaceable unit: c
(da2:sym0:0:2:0): (da2:sym0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0
0 0
(da2:sym0:0:2:0): MEDIUM ERROR asc:31,0
(da2:sym0:0:2:0): Medium format corrupted field replaceable unit: c
Retrying Command (per Sense Data)
(da2:sym0:0:2:0): Retrying Command
(da2:sym0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:sym0:0:2:0): CAM Status: SCSI Status Error
(da2:sym0:0:2:0): SCSI Status: Check Condition
(da2:sym0:0:2:0): MEDIUM ERROR asc:31,0
(da2:sym0:0:2:0): Medium format corrupted field replaceable unit: c
(da2:sym0:0:2:0): (da2:sym0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0
0 0
(da2:sym0:0:2:0): MEDIUM ERROR asc:31,0
(da2:sym0:0:2:0): Medium format corrupted field replaceable unit: c
Retrying Command (per Sense Data)
(da2:sym0:0:2:0): Retrying Command
(da2:sym0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:sym0:0:2:0): CAM Status: SCSI Status Error
(da2:sym0:0:2:0): SCSI Status: Check Condition
(da2:sym0:0:2:0): MEDIUM ERROR asc:31,0
(da2:sym0:0:2:0): Medium format corrupted field replaceable unit: c
(da2:sym0:0:2:0): (da2:sym0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0
0 0
(da2:sym0:0:2:0): MEDIUM ERROR asc:31,0
(da2:sym0:0:2:0): Medium format corrupted field replaceable unit: c
Retries Exhausted
(da2:sym0:0:2:0): error 5
(da2:sym0:0:2:0): Unretryable Error
Opened disk da2 -> 5
GEOM: Configure da3b, start 0 length 2147483648 end 2147483647
GEOM: Configure da3c, start 0 length 18209320960 end 18209320959
GEOM: Configure da3d, start 2147483648 length 16061837312 end
18209320959
GEOM: Configure da4a, start 8388608 length 72804728832 end 72813117439
GEOM: Configure da4c, start 0 length 72813117440 end 72813117439
GEOM: Configure da5a, start 0 length 67108864 end 67108863
GEOM: Configure da5b, start 67108864 length 134217728 end 201326591
GEOM: Configure da5c, start 0 length 72813117440 end 72813117439
GEOM: Configure da5g, start 201326592 length 72611790848 end 72813117439
Mounting root from ufs:/dev/da0a
start_init: trying /sbin/init
-------------- next part --------------
P00>>>show config
hp AlphaServer ES40
Firmware
SRM Console: V6.3-2
ARC Console: v5.71
PALcode: OpenVMS PALcode V1.96-3, Tru64 UNIX PALcode V1.90-4
Serial ROM: V2.12-F
RMC ROM: V1.0
RMC Flash ROM: V2.1
Processors
CPU 0 Alpha EV6 pass 2.3 500 MHz 4MB Bcache
CPU 1 Alpha EV6 pass 2.3 500 MHz 4MB Bcache
Core Logic
Cchip DECchip 21272-CA Rev 9(C4)
Dchip DECchip 21272-DA Rev 2
Pchip 0 DECchip 21272-EA Rev 2
Pchip 1 DECchip 21272-EA Rev 2
TIG Rev 10
Memory
Array Size Base Address Intlv Mode
--------- ---------- ---------------- ----------
1 1024Mb 0000000000000000 1-Way
1024 MB of System Memory
Slot Option Hose 0, Bus 0, PCI
1 DE500-BA Network Con ewa0.0.0.1.0 08-00-2B-C3-90-35
3 10088086/11078086
7 Acer Labs M1543C Bridge to Bus 1,
ISA
15 Acer Labs M1543C IDE dqa.0.0.15.0
dqb.0.1.15.0
dqa0.0.0.15.0 COMPAQ CDR-8435
19 Acer Labs M1543C USB
Option Hose 0, Bus 1, ISA
Floppy dva0.0.0.1000.0
Slot Option Hose 1, Bus 0, PCI
4 NCR 53C895 pka0.7.0.4.1 SCSI Bus ID 7
dka0.0.0.4.1 COMPAQ BB01813467
dka100.1.0.4.1 COMPAQ BB01813467
dka200.2.0.4.1 RZ2ED-LS
dka300.3.0.4.1 RZ2ED-LS
5 QLogic ISP10x0 pkb0.7.0.5.1 SCSI Bus ID 7
dkb0.0.0.5.1 HSZ22
dkb1.0.0.5.1 HSZ22
-------------- next part --------------
P00>>>show device
...waiting for ewa0.0.0.1.0 to start...
...
ewa0: link failed : Using 100BaseTX: full duplex
dka0.0.0.4.1 DKA0 COMPAQ BB01813467 3B07
dka100.1.0.4.1 DKA100 COMPAQ BB01813467 3B07
dka200.2.0.4.1 DKA200 RZ2ED-LS 0306
dka300.3.0.4.1 DKA300 RZ2ED-LS 0306
dkb0.0.0.5.1 DKB0 HSZ22 D11V
dkb1.0.0.5.1 DKB1 HSZ22 D11V
dqa0.0.0.15.0 DQA0 COMPAQ CDR-8435 0013
dva0.0.0.1000.0 DVA0
ewa0.0.0.1.0 EWA0 08-00-2B-C3-90-35
pka0.7.0.4.1 PKA0 SCSI Bus ID 7
pkb0.7.0.5.1 PKB0 SCSI Bus ID 7 5.57
-------------- next part --------------
P00>>>boot dka500 -flags ''
halted CPU 1
halt code = 1
operator initiated halt
PC = fffffc00004fe698
Initializing...
SROM V3.0 on cpu0
SROM V3.0 on cpu1
XSROM V6.0 on cpu0
XSROM V6.0 on cpu1
BCache testing complete on cpu0
BCache testing complete on cpu1
mem_pair0 - 256 MB
mem_pair1 - 256 MB
mem_pair2 - 256 MB
mem_pair3 - 256 MB
20..20..21..21..23..
please wait 24 seconds for T24 to complete
24..24..
Memory testing complete on cpu0
Memory testing complete on cpu1
starting console on CPU 0
sizing memory
0 256 MB DIMM
1 256 MB DIMM
2 256 MB DIMM
3 256 MB DIMM
starting console on CPU 1
probing IOD1 hose 1
bus 0 slot 1 - NCR 53C810
bus 0 slot 2 - PCI-PCI Bridge
probing PCI-PCI Bridge, bus 2
bus 2 slot 0 - NCR 53C875
bus 2 slot 1 - NCR 53C875
bus 2 slot 2 - DECchip 21140-AA
bus 0 slot 3 - QLogic ISP10X0
probing IOD0 hose 0
bus 0 slot 1 - PCEB
probing EISA Bridge, bus 1
configuring I/O adapters...
ncr0, hose 1, bus 0, slot 1
ncr1, hose 1, bus 2, slot 0
ncr2, hose 1, bus 2, slot 1
tulip0, hose 1, bus 2, slot 2
Starting Auto-Negotiate ewa0: link up : Negotiated 100BaseTX: full
duplex
isp0, hose 1, bus 0, slot 3
floppy0, hose 0, bus 1, slot 0
System temperature is 21 degrees C
AlphaServer 1200 Console V6.0-4, 10-MAY-2001 10:11:42
CPU 0 booting
(boot dka500.5.0.1.1 -flags "")
block 0 of dka500.5.0.1.1 is a valid boot block
reading 409 blocks from dka500.5.0.1.1
bootstrap code read in
Building FRU table
base = 200000, image_start = 0, image_bytes = 33200
initializing HWRPB at 2000
initializing page table at 1f2000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Console: SRM firmware console
VMS PAL rev: 0x4000200010115
OSF PAL rev: 0x4000200020117
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM CD9660 boot, Revision 1.2
(root at ds10.wbnet, Mon Aug 23 08:53:04 UTC 2004)
Memory: 1048576 k
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x5babf0+0x4d140 syms=[0x8+0x68e20+0x8+0x55872]
/
Hit [Enter] to boot immediately, or any other key for command prompt.
Type '?' for a list of commands, 'help' for more detailed help.
OK boot -v
Entering /boot/kernel/kernel at 0xfffffc0000347100...
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 5.3-BETA1 #0: Mon Aug 23 22:50:09 UTC 2004
root at ds10.wbnet:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc0000e02000.
Preloaded mfs_root "/boot/mfsroot" at 0xfffffc0000e020e0.
AlphaServer 4100
AlphaServer 1200 5/533 4MB, 531MHz
8192 byte page size, 2 processors.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x4000200020117
real memory = 1071620096 (1021 MB)
Physical memory chunk(s):
0x00e24000 - 0x0fffffff, 253607936 bytes (30958 pages)
0x20000000 - 0x2e5a3fff, 240795648 bytes (29394 pages)
0x40000000 - 0x4fffffff, 268435456 bytes (32768 pages)
0x60000000 - 0x6fff1fff, 268378112 bytes (32761 pages)
avail memory = 1024327680 (976 MB)
smp_start_secondary: starting cpu 1
smp_start_secondary: cpu 1 started
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory>
mcbus0: <MCBUS Backplane Bus>
pcib0: <MCPCIA PCI Adapter> at mcbus0 gid 7 mid 5
pcib0: Horse Revision 3, Left Handed Saddle Revision 4, CAP Revision 2
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 4, range 32, base 01ffee00, size 8, enabled
map[14]: type 1, range 32, base 07eeef00, size 8, enabled
found-> vendor=0x1000, dev=0x0001, revid=0x02
bus=0, slot=1, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0xff (7650 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x1011, dev=0x0024, revid=0x02
bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0
ns)
map[10]: type 4, range 32, base 01ffef00, size 8, enabled
map[14]: type 1, range 32, base 07eef000, size 12, enabled
found-> vendor=0x1077, dev=0x1020, revid=0x05
bus=0, slot=3, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0200, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
sym0: <810> port 0x1ffee00-0x1ffeeff mem 0x7eeef00-0x7eeefff at device
1.0 on pci0
sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0x7eeef00
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using NCR-generic firmware.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c8/00/00/08/00
sym0: Delay (GEN=11): 266 msec, 33414 KHz
sym0: Delay (GEN=11): 283 msec, 31407 KHz
sym0: Delay (GEN=11): 282 msec, 31518 KHz
sym0: interrupting at IRQ 0x10 (vec 0xb40)
sym0: [GIANT-LOCKED]
pcib2: <PCI-PCI bridge> at device 2.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x82f0f000-0x47fffff
pcib2: memory decode 0x7f00000-0x7ffffff
pcib2: prefetched decode 0x80000000-0x7fffffff
pci2: <PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 4, range 32, base 01fffd00, size 8, enabled
map[14]: type 1, range 32, base 07f9dd00, size 8, enabled
pcib2: device (null) requested decoded memory range 0x7f9dd00-0x7f9ddff
map[18]: type 1, range 32, base 07f9e000, size 13, enabled
pcib2: device (null) requested decoded memory range 0x7f9e000-0x7f9ffff
found-> vendor=0x1000, dev=0x000f, revid=0x04
bus=2, slot=0, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0200, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x11 (4250 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 01fffe00, size 8, enabled
map[14]: type 1, range 32, base 07f9de00, size 8, enabled
pcib2: device (null) requested decoded memory range 0x7f9de00-0x7f9deff
map[18]: type 1, range 32, base 07f9f000, size 12, enabled
pcib2: device (null) requested decoded memory range 0x7f9f000-0x7f9ffff
found-> vendor=0x1000, dev=0x000f, revid=0x04
bus=2, slot=1, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0200, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x11 (4250 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 01ffff00, size 7, enabled
map[14]: type 1, range 32, base 07f9df00, size 7, enabled
pcib2: device (null) requested decoded memory range 0x7f9df00-0x7f9df7f
found-> vendor=0x1011, dev=0x0009, revid=0x22
bus=2, slot=2, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0xff (7650 ns), mingnt=0x14 (5000 ns), maxlat=0x28
(10000 ns)
intpin=a, irq=255
sym1: <875> port 0x1fffd00-0x1fffdff mem
0x7f9e000-0x7f9ffff,0x7f9dd00-0x7f9ddff at device 0.0 on pci2
sym1: Reserved 0x100 bytes for rid 0x14 type 3 at 0x7f9dd00
pcib2: slot 0 INTA is routed to irq 0
sym1: Reserved 0x2000 bytes for rid 0x18 type 3 at 0x7f9e000
sym1: Delay (GEN=11): 242 msec, 36728 KHz
sym1: Delay (GEN=11): 227 msec, 39155 KHz
sym1: Delay (GEN=11): 227 msec, 39155 KHz
sym1: chip clock is 39155KHz
sym1: clock multiplier assumed
sym1: Symbios NVRAM, ID 7, Fast-20, SE, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym1: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/46/80/01/08/24
sym1: Delay (GEN=11): 249 msec, 35696 KHz
sym1: Delay (GEN=11): 283 msec, 31407 KHz
sym1: Delay (GEN=11): 282 msec, 31518 KHz
sym1: interrupting at IRQ 0x0 (vec 0xb80)
sym1: [GIANT-LOCKED]
sym1: enabling clock multiplier
sym1: Downloading SCSI SCRIPTS.
sym2: <875> port 0x1fffe00-0x1fffeff mem
0x7f9f000-0x7f9ffff,0x7f9de00-0x7f9deff at device 1.0 on pci2
sym2: Reserved 0x100 bytes for rid 0x14 type 3 at 0x7f9de00
pcib2: slot 1 INTA is routed to irq 1
pcib2: device sym2 requested decoded memory range 0x7f9f000-0x7f9ffff
sym2: failed to allocate RAM resources
device_attach: sym2 attach returned 6
de0: <Digital 21140A Fast Ethernet> port 0x1ffff00-0x1ffff7f mem
0x7f9df00-0x7f9df7f at device 2.0 on pci2
de0: Reserved 0x80 bytes for rid 0x14 type 3 at 0x7f9df00
pcib2: slot 2 INTA is routed to irq 2
de0: interrupting at IRQ 0x2 (vec 0xba0)
de0: [GIANT-LOCKED]
de0: 21140A [10-100Mb/s] pass 2.2
de0: bpf attached
de0: Ethernet address: 00:06:2b:00:16:b5
Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.8
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x1ffef00-0x1ffefff
mem 0x7eef000-0x7eeffff at device 3.0 on pci0
isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0x7eef000
isp0: using Memory space register mapping
isp0: interrupting at IRQ 0x4 (vec 0xbc0)
isp0: [GIANT-LOCKED]
isp0: Differential Mode
isp0: Ultra Mode Capable
isp0: Board Type 1040B, Chip Revision 0x5, loaded F/W Revision 4.66.0
isp0: Last F/W revision was 5.57.1
isp0: 243 max I/O commands supported
isp0: Initiator ID is 7 on Channel 0
pcib1: <MCPCIA PCI Adapter> at mcbus0 gid 7 mid 4
pcib1: Horse Revision 3, Left Handed Saddle Revision 4, CAP Revision 2
pci1: <PCI bus> on pcib1
pci1: physical bus=0
found-> vendor=0x8086, dev=0x0482, revid=0x15
bus=0, slot=1, func=0
class=00-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
eisab0: <PCI-EISA bridge> at device 1.0 on pci1
eisa0: <EISA bus> on eisab0
mainboard0: <DEC6400 (System Board)> on eisa0 slot 0
isa0: <ISA bus> on eisab0
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ata0: interrupting at ISA irq 14
ata0: [MPSAFE]
ata1 at port 0x376,0x170-0x177 irq 15 on isa0
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: interrupting at ISA irq 15
ata1: [MPSAFE]
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
atkbd0: interrupting at ISA irq 1
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0061
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
Calibrating clock(s) ... PCC clock: 532788946 Hz (firmware 531914893 Hz)
i8254 clock: 1193153 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
sc0: no video adapter found.
sc0: <System console> failed to probe on isa0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
vga0: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
procfs registered
Timecounter "i8254" frequency 1193182 Hz quality 0
Timecounters tick every 0.833 msec
lo0: bpf attached
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
sym1: enabling clock multiplier
sym1: Downloading SCSI SCRIPTS.
isp0: driver initiated bus reset of bus 0
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xfffffc00009c63d8
GEOM: Configure md0a, start 8192 length 4415488 end 4423679
GEOM: Configure md0c, start 0 length 4423680 end 4423679
de0: enabling Full Duplex 100baseTX port
(probe5:sym0:0:5:0): Retrying Command
(probe5:sym0:0:5:0): error 22
(probe5:sym0:0:5:0): Unretryable Error
(probe22:isp0:0:0:0): Retrying Command
(probe0:isp0:0:0:1): Retrying Command
(probe0:isp0:0:0:2): Retrying Command
-------------- next part --------------
P00>>>show config
Compaq Computer Corporation
AlphaServer 1200
Console V6.0-4 OpenVMS PALcode V1.21-2, Digital UNIX PALcode V1.23-2
Module Type Rev Name
System Motherboard 0 0000 mthrbrd0
Memory 256 MB DIMM 0 0000 mem0
Memory 256 MB DIMM 0 0000 mem1
Memory 256 MB DIMM 0 0000 mem2
Memory 256 MB DIMM 0 0000 mem3
CPU (4MB Cache) 3 0003 cpu0
CPU (4MB Cache) 3 0003 cpu1
Bridge (IOD0/IOD1) 600 0032 iod0/iod1
PCI Motherboard a 0004 saddle0
Bus 0 iod0 (PCI0)
Slot Option Name Type Rev Name
1 PCEB 4828086 0015 pceb0
Bus 1 pceb0 (EISA Bridge connected to iod0, slot 1)
Slot Option Name Type Rev Name
Bus 0 iod1 (PCI1)
Slot Option Name Type Rev Name
1 NCR 53C810 11000 0002 ncr0
2 PCI-PCI Bridge 241011 0002 pcb0
3 QLogic ISP10X0 10201077 0005 isp0
Bus 2 pcb0 (PCI-PCI Bridge connected to iod1, slot 2)
Slot Option Name Type Rev Name
0 NCR 53C875 f1000 0004 ncr1
1 NCR 53C875 f1000 0004 ncr2
2 DECchip 21140-AA 91011 0022 tulip0
-------------- next part --------------
P00>>>show device
polling ncr0 (NCR 53C810) slot 1, bus 0 PCI, hose 1
halted CPU 1
halt code = 1
operator initiated halt
PC = fffffc00004b1c24
? SCSI Bus ID 7
dka500.5.0.1.1 DKA500 RRD47 1206
polling ncr1 (NCR 53C875) slot 0, bus 2 PCI, hose 1 SCSI Bus ID 7
dkb0.0.0.2000.1 DKB0 RZ2EA-LA N1H1
polling ncr2 (NCR 53C875) slot 1, bus 2 PCI, hose 1 SCSI Bus ID 7
polling isp0 (QLogic ISP10X0) slot 3, bus 0 PCI, hose 1 SCSI Bus ID 7
dkd0.0.0.3.1 DKD0 HSZ22 D11W
dkd1.0.0.3.1 DKD1 HSZ22 D11W
dkd2.0.0.3.1 DKD2 HSZ22 D11W
dkd3.0.0.3.1 DKD3 HSZ22 D11W
polling floppy0 (FLOPPY) PCEB - XBUS hose 0
dva0.0.0.1000.0 DVA0 RX23
polling tulip0 (DECchip 21140-AA) slot 2, bus 2 PCI, hose 1 Starting
Auto-Negotiate ewa0: link up : Negotiated 100BaseTX: full duplex
ewa0.0.0.2002.1 00-06-2B-00-16-B5 Auto-Negotiate
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
Url : http://lists.freebsd.org/pipermail/freebsd-alpha/attachments/20040830/42687396/attachment.bin
More information about the freebsd-alpha
mailing list