5.3-BETA1 on ES40 (go) and AS1200 (no go)

[Wilko Bulte]

On Mon, Aug 30, 2004 at 07:46:43PM +0200, Konstantin Saurbier wrote..
> Hi Wilko,
> 
> Konstantin Saurbier wrote on Thu Aug 26, 2004 um 05:47:43PM:
> > Tests on AS1200, AS255 and a DS10 will follow in the next few days. 
> 
> I have attached the boot message, the output from srm show config and 
> show device for the ES40. No Problems so far. You can add the ES40 in 
> dual cpu configuration to your list. Oh yes the the errors with the da2 
> disc are no FreeBSD problems, seems to be a faulty disc.

Thanks for that.

> I suggest to add the em driver (for Intel gigabit ethernet cards)  to 
> the GENERIC kernel.

Hm, yes, I had some em cards running on both -current and RELENG_5,
so this sounds like a reasonable idea.

> The AS1200 doesn't boot, boot message and srm show config and show 
> device are also attached.

Well, boot it does, but it appears to get stuck in the SCSI probes.
Have you tried with the RAIDarray3000 disconnected (the HSZ22 device
is a raidbox). 

Bernd, AS1200 is close to your AS4100, have you seen something similar?

> sio0: port may not be enabled
> sio0: irq maps: 0 0 0 0
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A, console
> sio0: interrupting at ISA irq 4
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: irq maps: 0 0 0 0
> sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0
> sio1: type 16550A
> sio1: interrupting at ISA irq 3
> vga0: <Generic ISA VGA> failed to probe on isa0
> isa_probe_children: probing PnP devices
> procfs registered
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Timecounters tick every 0.833 msec
> lo0: bpf attached
> Waiting 15 seconds for SCSI devices to settle
> (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
> (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
> sym1: enabling clock multiplier
> sym1: Downloading SCSI SCRIPTS.
> isp0: driver initiated bus reset of bus 0
> md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xfffffc00009c63d8
> GEOM: Configure md0a, start 8192 length 4415488 end 4423679
> GEOM: Configure md0c, start 0 length 4423680 end 4423679
> de0: enabling Full Duplex 100baseTX port
> (probe5:sym0:0:5:0): Retrying Command
> (probe5:sym0:0:5:0): error 22
> (probe5:sym0:0:5:0): Unretryable Error
> (probe22:isp0:0:0:0): Retrying Command
> (probe0:isp0:0:0:1): Retrying Command
> (probe0:isp0:0:0:2): Retrying Command

-- 
Wilko Bulte  	wilko at FreeBSD.org