ACPI hang on 6.0-RELEASE on Compaq Proliant ML530 (866MHz Xeon)

Mon Nov 28 13:14:10 GMT 2005

On Saturday 26 November 2005 11:18 am, Kevin Day wrote:
> Hangs on boot after displaying kernel copyright notice with ACPI
> enabled. Works fine with ACPI disabled.
>
> Server has two CPUs, but hang occurs with or without SMP kernel.
>
>
>
> acpidump at http://www.dragondata.com/~toasty/toasty-ml530.asl
>
>
> dmesg from working config:

Any chance you could use a serial console to capture the dmesg from a booth 
with ACPI enabled?

> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>          The Regents of the University of California. All rights
> reserved.
> FreeBSD 6.0-RELEASE #0: Thu Nov  3 09:36:13 UTC 2005
>      root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
> MPTable: <COMPAQ   PROLIANT    >
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel Pentium III Xeon (863.94-MHz 686-class CPU)
>    Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
>
> Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,
> MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
> real memory  = 2147467264 (2047 MB)
> avail memory = 2096672768 (1999 MB)
> ioapic0: Changing APIC ID to 8
> ioapic0: Assuming intbase of 0
> ioapic0 <Version 1.1> irqs 0-34 on motherboard
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> cpu0 on motherboard
> pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
> pci0: <PCI bus> on pcib0
> pci0: <base peripheral> at device 3.0 (no driver attached)
> pci0: <display, VGA> at device 5.0 (no driver attached)
> pci0: <simple comms> at device 8.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 15.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <ServerWorks ROSB4 UDMA33 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2800-0x280f at device 15.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> pcib2: <MPTable Host-PCI bridge> pcibus 2 on motherboard
> pci2: <PCI bus> on pcib2
> em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
> 0x3000-0x303f mem 0xf7ee0000-0xf7efffff irq 24 at device 6.0 on pci2
> em0: Ethernet address: 00:07:e9:13:5c:82
> em0:  Speed:N/A  Duplex:N/A
> em1: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
> 0x3040-0x307f mem 0xf7ec0000-0xf7edffff irq 24 at device 6.1 on pci2
> em1: Ethernet address: 00:07:e9:13:5c:83
> em1:  Speed:N/A  Duplex:N/A
> pcib255: <ServerWorks NB6635 3.0LE host to PCI bridge> pcibus 255 on
> motherboard
> pci255: <PCI bus> on pcib255
> pcib5: <MPTable Host-PCI bridge> pcibus 5 on motherboard
> pci5: <PCI bus> on pcib5
> sym0: <896> port 0x4000-0x40ff mem 0xf7fffc00-0xf7ffffff,
> 0xf7ffc000-0xf7ffdfff irq 22 at device 4.0 on pci5
> sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
> sym0: [GIANT-LOCKED]
> sym1: <896> port 0x4400-0x44ff mem 0xf7ffbc00-0xf7ffbfff,
> 0xf7ff8000-0xf7ff9fff irq 21 at device 4.1 on pci5
> sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking
> sym1: [GIANT-LOCKED]
> eisa0: <EISA bus> on motherboard
> mainboard0: <CPQ0712 (System Board)> on eisa0 slot 0
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xe8000-0xedfff,
> 0xee000-0xeffff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6
> drq 2 on isa0
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
> Timecounter "TSC" frequency 863936862 Hz quality 800
> Timecounters tick every 1.000 msec
> acd0: CDROM <Compaq CRD-8402B/1.03> at ata0-master PIO4
> Waiting 5 seconds for SCSI devices to settle
> da1 at sym0 bus 0 target 2 lun 0
> da1: <COMPAQ BD009635CB BDC4> Fixed Direct Access SCSI-2 device
> da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged
> Queueing Enabled
> da1: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
> da0 at sym0 bus 0 target 0 lun 0
> da0: <COMPAQ BD01864552 3B08> Fixed Direct Access SCSI-2 device
> da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged
> Queueing Enabled
> da0: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C)
> da2 at sym0 bus 0 target 3 lun 0
> da2: <COMPAQ BB01813467 3B07> Fixed Direct Access SCSI-2 device
> da2: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged
> Queueing Enabled
> da2: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C)
> da3 at sym0 bus 0 target 4 lun 0
> da3: <COMPAQ BD009635CB BDC4> Fixed Direct Access SCSI-2 device
> da3: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged
> Queueing Enabled
> da3: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
> da4 at sym0 bus 0 target 5 lun 0
> da4: <COMPAQ BB00913466 3B07> Fixed Direct Access SCSI-2 device
> da4: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged
> Queueing Enabled
> da4: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
> Trying to mount root from ufs:/dev/da0s1a
> em0: link state changed to UP
> em0: promiscuous mode enabled
> em0: promiscuous mode disabled
> em0: promiscuous mode enabled
> em0: promiscuous mode disabled

-- 
John Baldwin <jhb at FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve"  =  http://www.FreeBSD.org