ACPI hang on 6.0-RELEASE on Compaq Proliant ML530 (866MHz Xeon)

Kevin Day toasty at dragondata.com
Sat Nov 26 16:19:03 GMT 2005


Hangs on boot after displaying kernel copyright notice with ACPI  
enabled. Works fine with ACPI disabled.

Server has two CPUs, but hang occurs with or without SMP kernel.



acpidump at http://www.dragondata.com/~toasty/toasty-ml530.asl


dmesg from working config:

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights  
reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov  3 09:36:13 UTC 2005
     root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
MPTable: <COMPAQ   PROLIANT    >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III Xeon (863.94-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
    
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE, 
MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 2147467264 (2047 MB)
avail memory = 2096672768 (1999 MB)
ioapic0: Changing APIC ID to 8
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-34 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <base peripheral> at device 3.0 (no driver attached)
pci0: <display, VGA> at device 5.0 (no driver attached)
pci0: <simple comms> at device 8.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port  
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2800-0x280f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcib2: <MPTable Host-PCI bridge> pcibus 2 on motherboard
pci2: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port  
0x3000-0x303f mem 0xf7ee0000-0xf7efffff irq 24 at device 6.0 on pci2
em0: Ethernet address: 00:07:e9:13:5c:82
em0:  Speed:N/A  Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port  
0x3040-0x307f mem 0xf7ec0000-0xf7edffff irq 24 at device 6.1 on pci2
em1: Ethernet address: 00:07:e9:13:5c:83
em1:  Speed:N/A  Duplex:N/A
pcib255: <ServerWorks NB6635 3.0LE host to PCI bridge> pcibus 255 on  
motherboard
pci255: <PCI bus> on pcib255
pcib5: <MPTable Host-PCI bridge> pcibus 5 on motherboard
pci5: <PCI bus> on pcib5
sym0: <896> port 0x4000-0x40ff mem 0xf7fffc00-0xf7ffffff, 
0xf7ffc000-0xf7ffdfff irq 22 at device 4.0 on pci5
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: [GIANT-LOCKED]
sym1: <896> port 0x4400-0x44ff mem 0xf7ffbc00-0xf7ffbfff, 
0xf7ff8000-0xf7ff9fff irq 21 at device 4.1 on pci5
sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: [GIANT-LOCKED]
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0712 (System Board)> on eisa0 slot 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xe8000-0xedfff, 
0xee000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6  
drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on  
isa0
Timecounter "TSC" frequency 863936862 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDROM <Compaq CRD-8402B/1.03> at ata0-master PIO4
Waiting 5 seconds for SCSI devices to settle
da1 at sym0 bus 0 target 2 lun 0
da1: <COMPAQ BD009635CB BDC4> Fixed Direct Access SCSI-2 device
da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged  
Queueing Enabled
da1: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
da0 at sym0 bus 0 target 0 lun 0
da0: <COMPAQ BD01864552 3B08> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged  
Queueing Enabled
da0: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C)
da2 at sym0 bus 0 target 3 lun 0
da2: <COMPAQ BB01813467 3B07> Fixed Direct Access SCSI-2 device
da2: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged  
Queueing Enabled
da2: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C)
da3 at sym0 bus 0 target 4 lun 0
da3: <COMPAQ BD009635CB BDC4> Fixed Direct Access SCSI-2 device
da3: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged  
Queueing Enabled
da3: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
da4 at sym0 bus 0 target 5 lun 0
da4: <COMPAQ BB00913466 3B07> Fixed Direct Access SCSI-2 device
da4: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged  
Queueing Enabled
da4: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
Trying to mount root from ufs:/dev/da0s1a
em0: link state changed to UP
em0: promiscuous mode enabled
em0: promiscuous mode disabled
em0: promiscuous mode enabled
em0: promiscuous mode disabled


Let me know if there's any more info I can provide, if anyone is  
interested in looking at this.




More information about the freebsd-acpi mailing list