Question on domain validation

Tue Aug 10 05:10:29 PDT 2004

Dear listmembers,
I use a system having one symbios 2-chanel and one adaptec controler onboard.
The operating system is linux for sparc, kernel 2.4.26, driver version 6.3.9.

I call the driver with the following options (in the initramdisk):

insmod aic7xxx aic7xxx=verbose.dv:{0}

What I get can be seen in the attachement. dv[0]=0.
Nevertheless, the device starts entering the DV-thread:
scsi2: Waking DV thread
***
scsi2: Beginning Domain Validation
scsi2:A:0:0: Perfomring DV
***

How should the commandline for the module look like? Should I say dv:{0,0,0}? This had had given me error-messages about too many arguments to insmod. Should I say dv:{0.0.0}?
Any hint is highly appreciated!
Take care

Dieter Jurzitza

-- 
________________________________________________

HARMAN BECKER AUTOMOTIVE SYSTEMS

Dr.-Ing. Dieter Jurzitza
Manager Hardware Systems
         ESI

Industriegebiet Ittersbach
Becker-Göring Str. 16
D-76307 Karlsbad / Germany

Phone: +49 (0)7248 71-1577
Fax:   +49 (0)7248 71-1216
eMail: DJurzitza at harmanbecker.com
Internet: http://www.becker.de

*******************************************
Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtuemlich erhalten haben, informieren Sie bitte sofort den Absender und loeschen Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet.

This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and delete this e-mail. Any unauthorized copying, disclosure or distribution of the contents in this e-mail is strictly forbidden.
*******************************************

-------------- next part --------------
Aug 10 13:54:23 oekalux09 kernel: dv[0] = 0
Aug 10 13:54:23 oekalux09 kernel: ahc_pci:0:5:0: Reading SEEPROM...done.
Aug 10 13:54:23 oekalux09 kernel: ahc_pci:0:5:0: BIOS eeprom is present
Aug 10 13:54:23 oekalux09 kernel: ahc_pci:0:5:0: Secondary High byte termination Enabled
Aug 10 13:54:23 oekalux09 kernel: ahc_pci:0:5:0: Secondary Low byte termination Enabled
Aug 10 13:54:23 oekalux09 kernel: ahc_pci:0:5:0: Primary Low Byte termination Enabled
Aug 10 13:54:23 oekalux09 kernel: ahc_pci:0:5:0: Primary High Byte termination Enabled
Aug 10 13:54:23 oekalux09 kernel: ahc_pci:0:5:0: hardware scb 64 bytes; kernel scb 112 bytes; ahc_dma 8 bytes
Aug 10 13:54:23 oekalux09 kernel: ahc_pci:0:5:0: Downloading Sequencer Program... 423 instructions downloaded
Aug 10 13:54:23 oekalux09 kernel: ahc_pci:0:5:0: Features 0x1def6, Bugs 0x40, Flags 0x28485560
Aug 10 13:54:23 oekalux09 kernel: scsi2: Waking DV thread
Aug 10 13:54:23 oekalux09 kernel: Launching DV Thread
Aug 10 13:54:23 oekalux09 kernel: scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.3.9
Aug 10 13:54:23 oekalux09 kernel:         <Adaptec 29160 Ultra160 SCSI adapter>
Aug 10 13:54:23 oekalux09 kernel:         aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
Aug 10 13:54:23 oekalux09 kernel: 
Aug 10 13:54:23 oekalux09 kernel: scsi2: Beginning Domain Validation
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:0:0: Performing DV
Aug 10 13:54:23 oekalux09 kernel: scsi2:2401: Going from state 0 to state 1
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:0:0: Sending INQ
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:0): 3.300MB/s transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:0:0: Tagged Queuing enabled.  Depth 253
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:0:0): Saw Selection Timeout for SCB 0xf
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:0. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: scsi2:0:0: Command completed, status= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:0:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:2595: Going from state 1 to state 0
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:0:0: Failed DV inquiry, skipping
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: Performing DV
Aug 10 13:54:23 oekalux09 kernel: scsi2:2401: Going from state 0 to state 1
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: Sending INQ
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:1): 3.300MB/s transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: Tagged Queuing enabled.  Depth 253
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_IN byte 0x1
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_IN byte 0x2
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_IN byte 0x3
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_IN byte 0x1
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:1:0): Received WDTR 1 filtered to 0
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:1:0): Target Initiated WDTR
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:1:0): Sending WDTR 0
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:1): 980KB/s transfers (0.980MHz, offset 255)
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 1 using 8bit transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: Asserting ATN for response
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_IN PHASEMIS in Message-out phase
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_OUT byte 0x1
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_OUT byte 0x2
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_OUT byte 0x3
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_OUT byte 0x0
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_OUT PHASEMIS in Message-in phase
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_IN byte 0x1
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_IN byte 0x3
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_IN byte 0x1
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_IN byte 0xc
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_IN byte 0x1e
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:1:0): Received SDTR period c, offset 1e
Aug 10 13:54:23 oekalux09 kernel: ^IFiltered to period 0, offset 0
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:1): 3.300MB/s transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 1 using asynchronous transfers
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:1:0): Target Initiated SDTR
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:1:0): Sending SDTR period 45, offset 0
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: Asserting ATN for response
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_IN PHASEMIS in Message-out phase
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_OUT byte 0x1
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_OUT byte 0x3
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_OUT byte 0x1
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_OUT byte 0x45
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_OUT byte 0x0
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: INITIATOR_MSG_OUT PHASEMIS in Data-in phase
Aug 10 13:54:23 oekalux09 kernel: scsi2:0:1: Command completed, status= 0x10000
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: Entering ahc_linux_dv_transition, state= 1, status= 0x0, cmd->result= 0x10000
Aug 10 13:54:23 oekalux09 kernel: scsi2:2576: Going from state 1 to state 2
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: Sending INQ
Aug 10 13:54:23 oekalux09 kernel: scsi2:0:1: Command completed, status= 0x10000
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: Entering ahc_linux_dv_transition, state= 2, status= 0x0, cmd->result= 0x10000
Aug 10 13:54:23 oekalux09 kernel: scsi2:2576: Going from state 2 to state 3
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: Sending INQ
Aug 10 13:54:23 oekalux09 kernel: scsi2:0:1: Command completed, status= 0x10000
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: Entering ahc_linux_dv_transition, state= 3, status= 0x0, cmd->result= 0x10000
Aug 10 13:54:23 oekalux09 kernel: scsi2:2623: Going from state 3 to state 4
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: Sending TUR
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:1:0): SCB 15: requests Check Status
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:1:0): Sending Sense
Aug 10 13:54:23 oekalux09 kernel: Copied 32 bytes of sense data:
Aug 10 13:54:23 oekalux09 kernel: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0x18 0x0 0x0 0x0 0x0 0x29 0x2 0x0 0x0 
Aug 10 13:54:23 oekalux09 kernel: 0x0 0x0 0x0 0x0 0x1 0x41 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
Aug 10 13:54:23 oekalux09 kernel: scsi2:0:1: Command completed, status= 0x80a0002
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: Entering ahc_linux_dv_transition, state= 4, status= 0x10905, cmd->result= 0x80a0002
Aug 10 13:54:23 oekalux09 kernel: scsi2:2769: Going from state 4 to state 4
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: Sending TUR
Aug 10 13:54:23 oekalux09 kernel: scsi2:0:1: Command completed, status= 0x10000
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: Entering ahc_linux_dv_transition, state= 4, status= 0x0, cmd->result= 0x10000
Aug 10 13:54:23 oekalux09 kernel: scsi2:2760: Going from state 4 to state 0
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:2:0: Performing DV
Aug 10 13:54:23 oekalux09 kernel: scsi2:2401: Going from state 0 to state 1
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:2:0: Sending INQ
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:2): 3.300MB/s transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:2:0: Tagged Queuing enabled.  Depth 253
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:2:0): Saw Selection Timeout for SCB 0xf
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:2. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: scsi2:0:2: Command completed, status= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:2:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:2595: Going from state 1 to state 0
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:2:0: Failed DV inquiry, skipping
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:3:0: Performing DV
Aug 10 13:54:23 oekalux09 kernel: scsi2:2401: Going from state 0 to state 1
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:3:0: Sending INQ
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:3): 3.300MB/s transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:3:0: Tagged Queuing enabled.  Depth 253
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:3:0): Saw Selection Timeout for SCB 0xe
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:3. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: scsi2:0:3: Command completed, status= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:3:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:2595: Going from state 1 to state 0
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:3:0: Failed DV inquiry, skipping
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:4:0: Performing DV
Aug 10 13:54:23 oekalux09 kernel: scsi2:2401: Going from state 0 to state 1
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:4:0: Sending INQ
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:4): 3.300MB/s transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:4:0: Tagged Queuing enabled.  Depth 253
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:4:0): Saw Selection Timeout for SCB 0xf
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:4. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: scsi2:0:4: Command completed, status= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:4:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:2595: Going from state 1 to state 0
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:4:0: Failed DV inquiry, skipping
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:5:0: Performing DV
Aug 10 13:54:23 oekalux09 kernel: scsi2:2401: Going from state 0 to state 1
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:5:0: Sending INQ
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:5): 3.300MB/s transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:5:0: Tagged Queuing enabled.  Depth 253
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:5:0): Saw Selection Timeout for SCB 0xe
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:5. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: scsi2:0:5: Command completed, status= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:5:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:2595: Going from state 1 to state 0
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:5:0: Failed DV inquiry, skipping
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:6:0: Performing DV
Aug 10 13:54:23 oekalux09 kernel: scsi2:2401: Going from state 0 to state 1
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:6:0: Sending INQ
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:6): 3.300MB/s transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:6:0: Tagged Queuing enabled.  Depth 253
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:6:0): Saw Selection Timeout for SCB 0xf
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:6. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: scsi2:0:6: Command completed, status= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:6:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:2595: Going from state 1 to state 0
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:6:0: Failed DV inquiry, skipping
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:8:0: Performing DV
Aug 10 13:54:23 oekalux09 kernel: scsi2:2401: Going from state 0 to state 1
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:8:0: Sending INQ
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:8): 3.300MB/s transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:8:0: Tagged Queuing enabled.  Depth 253
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:8:0): Saw Selection Timeout for SCB 0xe
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:8. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: scsi2:0:8: Command completed, status= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:8:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:2595: Going from state 1 to state 0
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:8:0: Failed DV inquiry, skipping
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:9:0: Performing DV
Aug 10 13:54:23 oekalux09 kernel: scsi2:2401: Going from state 0 to state 1
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:9:0: Sending INQ
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:9): 3.300MB/s transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:9:0: Tagged Queuing enabled.  Depth 253
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:9:0): Saw Selection Timeout for SCB 0xf
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:9. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: scsi2:0:9: Command completed, status= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:9:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:2595: Going from state 1 to state 0
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:9:0: Failed DV inquiry, skipping
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:10:0: Performing DV
Aug 10 13:54:23 oekalux09 kernel: scsi2:2401: Going from state 0 to state 1
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:10:0: Sending INQ
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:10): 3.300MB/s transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:10:0: Tagged Queuing enabled.  Depth 253
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:10:0): Saw Selection Timeout for SCB 0xe
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:10. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: scsi2:0:10: Command completed, status= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:10:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:2595: Going from state 1 to state 0
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:10:0: Failed DV inquiry, skipping
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:11:0: Performing DV
Aug 10 13:54:23 oekalux09 kernel: scsi2:2401: Going from state 0 to state 1
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:11:0: Sending INQ
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:11): 3.300MB/s transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:11:0: Tagged Queuing enabled.  Depth 253
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:11:0): Saw Selection Timeout for SCB 0xf
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:11. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: scsi2:0:11: Command completed, status= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:11:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:2595: Going from state 1 to state 0
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:11:0: Failed DV inquiry, skipping
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:12:0: Performing DV
Aug 10 13:54:23 oekalux09 kernel: scsi2:2401: Going from state 0 to state 1
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:12:0: Sending INQ
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:12): 3.300MB/s transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:12:0: Tagged Queuing enabled.  Depth 253
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:12:0): Saw Selection Timeout for SCB 0xe
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:12. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: scsi2:0:12: Command completed, status= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:12:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:2595: Going from state 1 to state 0
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:12:0: Failed DV inquiry, skipping
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:13:0: Performing DV
Aug 10 13:54:23 oekalux09 kernel: scsi2:2401: Going from state 0 to state 1
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:13:0: Sending INQ
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:13): 3.300MB/s transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:13:0: Tagged Queuing enabled.  Depth 253
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:13:0): Saw Selection Timeout for SCB 0xf
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:13. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: scsi2:0:13: Command completed, status= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:13:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:2595: Going from state 1 to state 0
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:13:0: Failed DV inquiry, skipping
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:14:0: Performing DV
Aug 10 13:54:23 oekalux09 kernel: scsi2:2401: Going from state 0 to state 1
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:14:0: Sending INQ
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:14): 3.300MB/s transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:14:0: Tagged Queuing enabled.  Depth 253
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:14:0): Saw Selection Timeout for SCB 0xe
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:14. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: scsi2:0:14: Command completed, status= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:14:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:2595: Going from state 1 to state 0
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:14:0: Failed DV inquiry, skipping
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:15:0: Performing DV
Aug 10 13:54:23 oekalux09 kernel: scsi2:2401: Going from state 0 to state 1
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:15:0: Sending INQ
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:15): 3.300MB/s transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:15:0: Tagged Queuing enabled.  Depth 253
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:15:0): Saw Selection Timeout for SCB 0xf
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:15. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: scsi2:0:15: Command completed, status= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:15:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000
Aug 10 13:54:23 oekalux09 kernel: scsi2:2595: Going from state 1 to state 0
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:15:0: Failed DV inquiry, skipping
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:0:0): Saw Selection Timeout for SCB 0xe
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 0 using 8bit transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 0 using asynchronous transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:0. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:1:0): Handled Residual of 92 bytes
Aug 10 13:54:23 oekalux09 kernel:   Vendor: IBM       Model: DGVS09U           Rev: 03B0
Aug 10 13:54:23 oekalux09 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 03
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:1:1): Handled Residual of 92 bytes
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:2:0): Saw Selection Timeout for SCB 0xf
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 2 using 8bit transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 2 using asynchronous transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:2. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:3:0): Saw Selection Timeout for SCB 0xe
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 3 using 8bit transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 3 using asynchronous transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:3. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:4:0): Saw Selection Timeout for SCB 0xf
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 4 using 8bit transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 4 using asynchronous transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:4. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:5:0): Saw Selection Timeout for SCB 0xe
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 5 using 8bit transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 5 using asynchronous transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:5. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:6:0): Saw Selection Timeout for SCB 0xf
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 6 using 8bit transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 6 using asynchronous transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:6. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:8:0): Saw Selection Timeout for SCB 0xe
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 8 using 8bit transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 8 using asynchronous transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:8. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:9:0): Saw Selection Timeout for SCB 0xf
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 9 using 8bit transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 9 using asynchronous transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:9. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:10:0): Saw Selection Timeout for SCB 0xe
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 10 using 8bit transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 10 using asynchronous transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:10. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:11:0): Saw Selection Timeout for SCB 0xf
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 11 using 8bit transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 11 using asynchronous transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:11. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:12:0): Saw Selection Timeout for SCB 0xe
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 12 using 8bit transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 12 using asynchronous transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:12. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:13:0): Saw Selection Timeout for SCB 0xf
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 13 using 8bit transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 13 using asynchronous transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:13. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:14:0): Saw Selection Timeout for SCB 0xe
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 14 using 8bit transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 14 using asynchronous transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:14. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:15:0): Saw Selection Timeout for SCB 0xf
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 15 using 8bit transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: target 15 using asynchronous transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2: Selection Timeout on A:15. 0 SCBs aborted
Aug 10 13:54:23 oekalux09 kernel: (scsi2:A:1): 3.300MB/s transfers
Aug 10 13:54:23 oekalux09 kernel: scsi2:A:1:0: Tagged Queuing enabled.  Depth 253
Aug 10 13:54:23 oekalux09 kernel: Attached scsi disk sda at scsi2, channel 0, id 1, lun 0
Aug 10 13:54:23 oekalux09 kernel: SCSI device sda: 17829870 512-byte hdwr sectors (9129 MB)
Aug 10 13:54:23 oekalux09 kernel: Partition check:
Aug 10 13:54:23 oekalux09 kernel:  sda: sda1 sda2 sda3