29160, dat24e and kernel 2.4.7 problem
danci at agenda.si
Tue Dec 18 23:52:44 PST 2001
On Mon, 17 Dec 2001, sbarthfr wrote:
> I would like to use a 29160 SCSI card to drive my HP DAT24 (external)
> with a RedHat 7.2. There is a problem when I try to use the /dev/st0
> (1) there's a "attached devices: none" in the /proc/scsi/scsi file
> (2) when I try a "mt -f /dev/st0 stat" I've got the
> message "/dev/st0: No such device"
> (3) the "dmesg" on my system is
> SCSI subsystem driver Revision: 1.00
> PCI: Found IRQ 9 for device 00:12.0
> PCI: Sharing IRQ 9 with 00:09.0
> (scsi0) <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> found at PCI
> (scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
> (scsi0) Downloading sequencer code... 396 instructions downloaded
> scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.4/5.2.0
> <Adaptec AIC-7892 Ultra 160/m SCSI host adapter>
> Vendor: HP Model: C1537A Rev: L105
> Type: Sequential-Access ANSI SCSI revision: 02
> scsi : 0 hosts left.
> What's the problem ? Can someone help me ?
If you use modules, do you have st.o module loaded? If you don't use
modules, you should have st (SCSI tape) support compiled in the kernel.
Then you should see device /dev/st0 and /dev/nst0.
To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message
More information about the aic7xxx