2940U2W under Linux 2.4.x
Larry Battraw
battraw at home.com
Thu Aug 9 13:14:56 PDT 2001
Hello,
I've looked around and haven't been able to find anyone who's had a
similar problem, so here goes. I have (as the subject mentions) a
2940U2W that works perfectly under kernel 2.4.2 on an AMD Athlon system.
However, any kernel after that panics when initializing the card.
I've tried patching with the latest drivers off of Justin's page to no
avail. I've included two boot logs, one from 2.4.2 and one from 2.4.7
with the full verbose messages turned on. Anyone have any ideas, or
need more info?
Thanks!
Larry Battraw
-------------- next part --------------
Linux version 2.4.2-XFS (root at rambo.home.com) (gcc version 2.95.3 20010315 (release)) #4 Thu Aug 9 11:58:31 MST 2001
BIOS-provided physical RAM map:
BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable)
BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved)
BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved)
BIOS-e820: 000000000feec000 @ 0000000000100000 (usable)
BIOS-e820: 0000000000003000 @ 000000000ffec000 (ACPI data)
BIOS-e820: 0000000000010000 @ 000000000ffef000 (reserved)
BIOS-e820: 0000000000001000 @ 000000000ffff000 (ACPI NVS)
BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved)
On node 0 totalpages: 65516
zone(0): 4096 pages.
zone(1): 61420 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=linuxxfs ro root=802 acpi=no-idle console=ttyS0,9600 aic7xxx=verbose:0xffff
Initializing CPU#0
Detected 1208.778 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2411.72 BogoMIPS
Memory: 254632k/262064k available (1668k kernel code, 7044k reserved, 547k data, 216k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.37 (20001109) Richard Gooch (rgooch at atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf1150, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Bus master read caching disabled
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:04.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
block: queued sectors max/low 169184kB/56394kB, 512 slots per queue
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:04.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
PDC20265: IDE controller on PCI bus 00 dev 88
PCI: Found IRQ 10 for device 00:11.0
PDC20265: chipset revision 2
PDC20265: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0x7800-0x7807, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0x7808-0x780f, BIOS settings: hdg:pio, hdh:pio
hda: YAMAHA CRW2100E, ATAPI CD/DVD-ROM drive
hdb: DVD-ROM BDV212B, ATAPI CD/DVD-ROM drive
hdc: Maxtor 91531U3, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hdc: 30015216 sectors (15368 MB) w/512KiB Cache, CHS=29777/16/63, UDMA(33)
Partition check:
hdc: [PTBL] [1868/255/63] hdc1 hdc2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10d
8139too Fast Ethernet driver 0.9.13 loaded
PCI: Found IRQ 9 for device 00:0d.0
PCI: The same IRQ used for device 00:04.2
PCI: The same IRQ used for device 00:04.3
PCI: The same IRQ used for device 00:09.0
PCI: The same IRQ used for device 00:09.1
eth0: RealTek RTL8139 Fast Ethernet at 0xd0800000, 00:48:54:6b:86:15, IRQ 9
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 5 for device 00:0a.0
aic7xxx: <Adaptec AHA-294X Ultra2 SCSI host adapter> at PCI 10/0
aic7xxx: Initial PCI_COMMAND value was 0x17
aic7xxx: Initial DEVCONFIG value was 0x540
aic7xxx: Loading serial EEPROM...done
(scsi0) <Adaptec AHA-294X Ultra2 SCSI host adapter> found at PCI 0/10/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) BIOS enabled, IO Port 0xa400, IRQ 5
(scsi0) IO Memory at 0xd4800000, MMAP Memory at 0xd0802000
(scsi0) LVD/Primary Low byte termination Enabled
(scsi0) LVD/Primary High byte termination Enabled
(scsi0) Secondary High byte termination Enabled
(scsi0) Downloading sequencer code... 392 instructions downloaded
(scsi0) Resetting channel
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
<Adaptec AHA-294X Ultra2 SCSI host adapter>
(scsi0:0:0:0) Sending WDTR message.
(scsi0:0:0:0) Using Wide(16bit) transfers
(scsi0:0:0:0) Sending SDTR 10/127 message.
(scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec, offset 31.
Vendor: WDIGTL Model: WDE18300 ULTRA2 Rev: 1.30
Type: Direct-Access ANSI SCSI revision: 02
(scsi0:0:1:0) Received pre-emptive WDTR message from target.
(scsi0:0:1:0) Sending WDTR message.
(scsi0:0:1:0) Sending WDTR message.
(scsi0:0:1:0) Using Wide(16bit) transfers
(scsi0:0:1:0) Received pre-emptive SDTR message from target.
(scsi0:0:1:0) Synchronous at 40.0 Mbyte/sec, offset 31.
(scsi0:0:1:0) Sending SDTR 12/31 message.
Vendor: IBM Model: XP32275W !# Rev: LYEB
Type: Direct-Access ANSI SCSI revision: 02
Vendor: UMAX Model: Astra 1220S Rev: V1.1
Type: Scanner ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
SCSI device sda: 35761710 512-byte hdwr sectors (18310 MB)
sda: sda1 sda2 sda3 sda4
SCSI device sdb: 4404489 512-byte hdwr sectors (2255 MB)
sdb: sdb1
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
raid5: measuring checksumming speed
8regs : 1333.600 MB/sec
32regs : 1633.600 MB/sec
pII_mmx : 2829.600 MB/sec
p5_mmx : 3621.600 MB/sec
raid5: using function: p5_mmx (3621.600 MB/sec)
md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
ACPI: APM is already active, exiting
md.c: sizeof(mdp_super_t) = 4096
autodetecting RAID arrays
autorun ...
... autorun DONE.
LVM version 0.9.1_beta6 by Heinz Mauelshagen (12/03/2001)
lvm -- Driver successfully initialized
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
klips_info:ipsec_init: KLIPS startup, FreeS/WAN IPSec version: 1.91
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 216k freed
INIT: version 2.78 booting
-------------- next part --------------
Linux version 2.4.7-xfs (root at rambo.home.com) (gcc version 2.95.3 20010315 (release)) #2 Thu Aug 9 12:09:59 MST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ffec000 (usable)
BIOS-e820: 000000000ffec000 - 000000000ffef000 (ACPI data)
BIOS-e820: 000000000ffef000 - 000000000ffff000 (reserved)
BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 65516
zone(0): 4096 pages.
zone(1): 61420 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=linux ro root=802 console=ttyS0,9600 console=ttyS0,9600 aic7xxx=verbose:0xffff
Initializing CPU#0
Detected 1208.769 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2411.72 BogoMIPS
Memory: 253556k/262064k available (2022k kernel code, 8120k reserved, 1245k data, 220k init, 0k highmem)
kdb version 1.8 by Scott Lurndal, Keith Owens. Copyright SGI, All Rights Reserved
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xf1150, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:04.0
Applying VIA PCI latency patch (found VT82C686B).
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
Starting kswapd v1.8
udf: registering filesystem
SGI XFS with ACLs, EAs, DMAPI, no debug enabled
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 8
0x378: readIntrThreshold is 8
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP]
parport_pc: Via 686A parallel port: io=0x378
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
lp0: using parport0 (polling).
Real Time Clock Driver v1.10d
block: queued sectors max/low 168429kB/56143kB, 512 slots per queue
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:04.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
PDC20265: IDE controller on PCI bus 00 dev 88
PCI: Found IRQ 10 for device 00:11.0
PDC20265: chipset revision 2
PDC20265: not 100% native mode: will probe irqs later
PDC20265: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
ide2: BM-DMA at 0x7800-0x7807, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0x7808-0x780f, BIOS settings: hdg:pio, hdh:pio
hda: YAMAHA CRW2100E, ATAPI CD/DVD-ROM drive
hdb: DVD-ROM BDV212B, ATAPI CD/DVD-ROM drive
hdc: Maxtor 91531U3, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hdc: 30015216 sectors (15368 MB) w/512KiB Cache, CHS=29777/16/63, UDMA(33)
Partition check:
hdc: [PTBL] [1868/255/63] hdc1 hdc2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.18
PCI: Found IRQ 9 for device 00:0d.0
PCI: Sharing IRQ 9 with 00:04.2
PCI: Sharing IRQ 9 with 00:04.3
PCI: Sharing IRQ 9 with 00:09.0
PCI: Sharing IRQ 9 with 00:09.1
eth0: RealTek RTL8139 Fast Ethernet at 0xd0800000, 00:48:54:6b:86:15, IRQ 9
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected Via Apollo Pro KT133 chipset
agpgart: AGP aperture is 64M @ 0xe4000000
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 5 for device 00:0a.0
ahc_pci:0:10:0: Reading SEEPROM...done.
ahc_pci:0:10:0: BIOS eeprom is present
ahc_pci:0:10:0: Secondary High byte termination Enabled
ahc_pci:0:10:0: Primary Low Byte termination Enabled
ahc_pci:0:10:0: Primary High Byte termination Enabled
ahc_pci:0:10:0: Downloading Sequencer Program... 422 instructions downloaded
Waiting List inconsistency. SCB index == 255, yet numscbs == 4.scsi0: Dumping Card State in unknown phase, at SEQADDR 0x16
SCSISEQ = 0x2, SBLKCTL = 0xa
DFCNTRL = 0x0, DFSTATUS = 0x89
LASTPHASE = 0xff, SCSISIGI = 0x0, SXFRCTL0 = 0x88
SSTAT0 = 0x0, SSTAT1 = 0x0
STACK == 0x18, 0x18, 0x18, 0x18
SCB count = 4
Kernel NEXTQSCB = 3
Card NEXTQSCB = 3
QINFIFO entries:
Waiting Queue entries: 1:255 2:255 3:255 4:255 5:255 6:255 7:255 8:255 9:255 10:255 11:255 12:255 13:255 14:255 15:255 16:255 17:255 18:255 19:255 20:255 21:255 22:255 23:255 24:255 25:255 26:255 27:255 28:255 29:255 30:255 31:255
Disconnected Queue entries: 0:255 1:255 2:255 3:255 4:255 5:255 6:255 7:255 8:255 9:255 10:255 11:255 12:255 13:255 14:255 15:255 16:255 17:255 18:255 19:255 20:255 21:255 22:255 23:255 24:255 25:255 26:255 27:255 28:255 29:255 30:255 31:255
QOUTFIFO entries:
Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Pending list:
Kernel Free SCB list: 2 1 0
Kernel panic: for safety
Entering kdb (current=0xc144c000, pid 1) due to panic
kdb>
More information about the aic7xxx
mailing list