Adaptec 29160N

[Michael Parkinson]

OK,

Took some advice, got the latest and greatest Kernel patches, patched 
2.2.10 from 5.1.17 -> 5.1.30 no problems.

Made kernel, fine, created image, stuffed it on a floppy tried to boot 
system:

It seems to find the device OK, finds the first drive and then:

scsi : aborting command due to timeout : pid 0, scsi 0, channel 0, id 0, 
lun 0, Test Unit Ready 00 00 00 00 00

Thats it folks.........

What can I try next?

I am extremely open to suggestions, other than throwing the card out of the 
window and performing a tried and tested way of accelerating a piece of 
hardware (Nearly tried this one)?

Please help .. my head hurts!

Mike

====================================================
http://www.ishop.co.uk/
Build a shop on-line.
Buy online.
====================================================

Michael Parkinson BSc.(Hons)
Project Manager
Intellnet Limited
Heath House
51 Dane Street
Bishops Stortford.
Hertfordshire
CM23 3BT

Phone	:	01279 602800
DDI	:	01279 602805
Fax	:	01279 600678
Mobile	:	0370 380511
E-mail	:	michael at intellnet.net.uk
ICQ	:	47666166
URL	:	http://www.intellnet.net.uk/
		http://www.ishop.co.uk/



To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message