ultra or not

[Bill Ellis]

Hi,

It sure sounds like the Ultra SCSI version of Adaptec's 2940.  For comparison,
here's what it says on one of my non-ultra 2940 cards:

    Assy 566506-01
    AHA-2940    933700-01 A    9531

You could double-check by putting the card in a chassis and going into SCSI
Select (press Control-A when prompted by the card BIOS at POST time).

If I remember right, the 2940U has an option under "Advanced configuration" to
enable Ultra SCSI transfer rates...  If I were you, I'd look for (and enable)
that first, then see if the card will let you set transfer rates greater than
10 MB/sec on (for example) SCSI ID 0 in "SCSI Device Configuration"...

Good luck,
Bill


Gert Ensing wrote:

> Hi,
>
> I have a 2940/2940U Assy 916506-01 card. The clock chip says 40.000mhz. And
> the large square chip is AHA-2940S86 W/AUTO 948500-01 C 9544. Can someone
> tell me if this card is for Ultra Scsi ?
>
> Thanks in advance,
> Gert
>
> To Unsubscribe: send mail to majordomo at FreeBSD.org
> with "unsubscribe aic7xxx" in the body of the message



To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message