Can't enable disconnection

[Jacques B. Siboni]

Hi,

Here is the configuration I have on /proc for a AHA-2940AU.


Adaptec AIC7xxx driver version: 4.0/3.2/4.0

Compile Options:
  AIC7XXX_RESET_DELAY    : 15
  AIC7XXX_TWIN_SUPPORT   : Enabled
  AIC7XXX_TAGGED_QUEUEING: Disabled
  AIC7XXX_PAGE_ENABLE    : Disabled
  AIC7XXX_PROC_STATS     : Disabled

Adapter Configuration:
          SCSI Adapter: AHA-2940A Ultra
                        (AIC-785x chipset)
              Host Bus: Single
               Base IO: 0xd000
                   IRQ: 12
                  SCBs: Used 3, HW 3, Page 3
            Interrupts: 2756
         Serial EEPROM: True
  Extended Translation: Enabled
        SCSI Bus Reset: Enabled
            Ultra SCSI: Disabled
     Target Disconnect: Disabled


Disconnect is enabled in scsi select for all targets. I could not find
in the driver how to enable target disconnection. 

I can't use my Tandberg streamer because it keeps the bus when moving to
end of medium.

Thanks in advance

Jacques


-- 
Dr. Jacques B. Siboni mailto:jacsib at Lutecium.fr
8 pass. Charles Albert, F75018 Paris, France
Tel. & Fax: (33) 1 42 28 76 78
Les mathèmes de Lacan: http://www.shef.ac.uk/~psysc/thesaur3/index.html