P2B-LS and 2.1.115/118 ? (what has pre5+3 more than pre7 ?)
Gregoire Favre
gregoire.favre at ima.unil.ch
Fri Aug 28 02:27:03 PDT 1998
Hello,
I have an 2.0.35pre5+3 patched kernel who works perfect (cf
dmesg.35pre5+3), but as I need some 2.1 features, I have also an
2.1.115pre7 who works really good if it is the first things to boot at
power on (cf dmesg.115pre7) but after a reboot I got (cf
dmesg.115pre7.after.a.reboot) but it is working fine after that.
I have tried to compile several different 2.1.118, without succedind
boot (cf dmesg.118pre7): it doesn't recognise on off my swap (SCSI)
partition, and all the SCSI linux native partition...
Is the 118 broken ?
Has the pre5+3
(calculix.mathematik.uni-stuttgart.de/pub/juergen/aic7xxx) something the
other don't have ???
Greg
-------------- next part --------------
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000f9cd0
pcibios_init : BIOS32 Service Directory entry at 0xf0550
pcibios_init : PCI BIOS revision 2.10 entry at 0xf0750
Probing PCI hardware.
Calibrating delay loop.. ok - 299.83 BogoMIPS
Memory: 127992k/131072k available (636k kernel code, 384k reserved, 2060k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Linux version 2.0.35 (root at yess.ciel) (gcc version 2.7.2.3) #1 Mon Aug 10 23:42:40 CEST 1998
Starting kswapd v 1.4.2.2
PS/2 auxiliary pointing device detected -- driver installed.
APM BIOS version 1.2 Flags 0x0b (Driver version 1.2)
Entry f000:7810 cseg16 f000 dseg fdbc cseg len ef7f, dseg len a0
Connection version 1.1
AC on line, battery status unknown, battery life unknown
battery flag 0x80, battery life unknown
ide: i82371 PIIX (Triton) on PCI bus 0 function 33
ide0: BM-DMA at 0xc800-0xc807
ide1: BM-DMA at 0xc808-0xc80f
hda: IBM-DHEA-38451, 8063MB w/472kB Cache, CHS=1024/255/63, UDMA
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
(scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> found at PCI 6/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 407 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.0pre5/3.2.4
<Adaptec AIC-7890/1 Ultra2 SCSI host adapter>
scsi : 1 host.
Vendor: QUANTUM Model: FIREBALL_TM3200S Rev: 300X
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 1, lun 0
Vendor: PIONEER Model: CD-ROM DR-U06S Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
Vendor: TEAC Model: CD-R55S Rev: 1.0J
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 0
scsi : detected 2 SCSI cdroms 1 SCSI disk total.
(scsi0:0:1:0) Synchronous at 20.0 Mbyte/sec, offset 15.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 6281856 [3067 MB] [3.1 GB]
Partition check:
sda: sda1 sda2 sda3 sda4
hda: hda1 hda2 < hda5 hda6 >
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 129004k swap-space (priority -1)
Adding Swap: 130748k swap-space (priority -2)
VFS: Disk change detected on device 02:00
[MS-DOS FS Rel. 12,FAT 0,check=n,conv=b,uid=0,gid=0,umask=022,bmap]
[me=0x0,cs=0,#f=0,fs=0,fl=0,ds=0,de=0,data=0,se=0,ts=0,ls=0,rc=0,fc=4294967295]
Transaction block size = 512
VFS: Can't find a valid MSDOS filesystem on dev 02:00.
-------------- next part --------------
Linux version 2.1.115 (root at localhost.localdomain) (gcc version 2.7.2.3) #1 SMP Wed Aug 12 18:40:16 CEST 1998
mapped APIC to ffffe000 (0021e000)
mapped IOAPIC to ffffd000 (0021f000)
Console: colour VGA+ 80x25
Calibrating delay loop... 299.83 BogoMIPS
Memory: 127968k/131072k available (864k kernel code, 400k reserved, 1796k data, 44k init)
POSIX conformance testing by UNIFIX
mtrr: v1.22 (19980611) Richard Gooch (rgooch at atnf.csiro.au)
CPU0: Intel Pentium II (Klamath) stepping 04
SMP motherboard not detected. Using dummy APIC emulation.
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Swansea University Computer Society NET3.039 for Linux 2.1
NET3: Unix domain sockets 0.16 for Linux NET3.038.
Swansea University Computer Society TCP/IP for NET3.037
IP Protocols: ICMP, UDP, TCP
PCI: PCI BIOS revision 2.10 entry at 0xf0750
PCI: Using configuration type 1
PCI: Probing PCI hardware
Starting kswapd v 1.5
pty: 256 Unix98 ptys configured
PS/2 auxiliary pointing device detected -- driver installed.
APM BIOS version 1.2 Flags 0x0b (Driver version 1.4)
Entry f000:7810 cseg16 f000 dseg fdbc cseg len e6ff, cseg16 len 15, dseg len 22a
Connection version 1.2
AC on line, battery status unknown, battery life unknown
battery flag 0x80, battery life unknown
PIIX4: IDE controller on PCI bus 00 dev 21
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xc800-0xc807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xc808-0xc80f, BIOS settings: hdc:pio, hdd:pio
hda: IBM-DHEA-38451, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: IBM-DHEA-38451, 8063MB w/472kB Cache, CHS=1024/255/63, UDMA
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
(scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> found at PCI 6/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 407 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.0pre7/3.2.4
<Adaptec AIC-7890/1 Ultra2 SCSI host adapter>
scsi : 1 host.
Vendor: QUANTUM Model: FIREBALL_TM3200S Rev: 300X
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 1, lun 0
Vendor: PIONEER Model: CD-ROM DR-U06S Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
Vendor: TEAC Model: CD-R55S Rev: 1.0J
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 0
scsi : detected 2 SCSI cdroms 1 SCSI disk total.
(scsi0:0:2:0) Synchronous at 16.0 Mbyte/sec, offset 16.
sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
Uniform CDROM driver Revision: 2.13
(scsi0:0:3:0) Synchronous at 10.0 Mbyte/sec, offset 15.
sr1: CDROM not ready. Make sure there is a disc in the drive.
sr1: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
(scsi0:0:1:0) Synchronous at 20.0 Mbyte/sec, offset 15.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 6281856 [3067 MB] [3.1 GB]
Partition check:
sda: sda1 sda2 sda3 sda4
hda: hda1 hda2 < hda5 hda6 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 44k freed
Adding Swap: 129004k swap-space (priority -1)
Adding Swap: 130748k swap-space (priority -2)
VFS: Disk change detected on device 02:00
-------------- next part --------------
Linux version 2.1.115 (root at localhost.localdomain) (gcc version 2.7.2.3) #1 SMP Wed Aug 12 18:40:16 CEST 1998
mapped APIC to ffffe000 (0021e000)
mapped IOAPIC to ffffd000 (0021f000)
Console: colour VGA+ 80x25
Calibrating delay loop... 299.83 BogoMIPS
Memory: 127968k/131072k available (864k kernel code, 400k reserved, 1796k data, 44k init)
POSIX conformance testing by UNIFIX
mtrr: v1.22 (19980611) Richard Gooch (rgooch at atnf.csiro.au)
CPU0: Intel Pentium II (Klamath) stepping 04
SMP motherboard not detected. Using dummy APIC emulation.
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Swansea University Computer Society NET3.039 for Linux 2.1
NET3: Unix domain sockets 0.16 for Linux NET3.038.
Swansea University Computer Society TCP/IP for NET3.037
IP Protocols: ICMP, UDP, TCP
PCI: PCI BIOS revision 2.10 entry at 0xf0750
PCI: Using configuration type 1
PCI: Probing PCI hardware
Starting kswapd v 1.5
pty: 256 Unix98 ptys configured
PS/2 auxiliary pointing device detected -- driver installed.
APM BIOS version 1.2 Flags 0x0b (Driver version 1.4)
Entry f000:7810 cseg16 f000 dseg fdbc cseg len e6ff, cseg16 len 15, dseg len 22a
Connection version 1.2
AC on line, battery status unknown, battery life unknown
battery flag 0x80, battery life unknown
PIIX4: IDE controller on PCI bus 00 dev 21
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xc800-0xc807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xc808-0xc80f, BIOS settings: hdc:pio, hdd:pio
hda: IBM-DHEA-38451, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: IBM-DHEA-38451, 8063MB w/472kB Cache, CHS=1024/255/63, UDMA
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
(scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> found at PCI 6/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 407 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.0pre7/3.2.4
<Adaptec AIC-7890/1 Ultra2 SCSI host adapter>
scsi : 1 host.
scsi : aborting command due to timeout : pid 2, scsi0, channel 0, id 1, lun 0 0x12 00 00 00 ff 00
SCSI host 0 abort (pid 2) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
Vendor: QUANTUM Model: FIREBALL_TM3200S Rev: 300X
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 1, lun 0
Vendor: PIONEER Model: CD-ROM DR-U06S Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
Vendor: TEAC Model: CD-R55S Rev: 1.0J
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 0
scsi : detected 2 SCSI cdroms 1 SCSI disk total.
(scsi0:0:2:0) Synchronous at 16.0 Mbyte/sec, offset 16.
sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
Uniform CDROM driver Revision: 2.13
(scsi0:0:3:0) Synchronous at 10.0 Mbyte/sec, offset 15.
sr1: CDROM not ready. Make sure there is a disc in the drive.
sr1: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
(scsi0:0:1:0) Synchronous at 20.0 Mbyte/sec, offset 15.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 6281856 [3067 MB] [3.1 GB]
Partition check:
sda: sda1 sda2 sda3 sda4
hda: hda1 hda2 < hda5 hda6 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 44k freed
Adding Swap: 129004k swap-space (priority -1)
Adding Swap: 130748k swap-space (priority -2)
VFS: Disk change detected on device 02:00
-------------- next part --------------
Linux version 2.1.118 (root at localhost.localdomain) (gcc version 2.7.2.3) #1 SMP Thu Aug 27 18:36:21 CEST 1998
mapped APIC to ffffe000 (00208000)
mapped IOAPIC to ffffd000 (00209000)
Console: colour VGA+ 80x25
Calibrating delay loop... 299.83 BogoMIPS
Memory: 128056k/131072k available (804k kernel code, 400k reserved, 1772k data, 40k init)
POSIX conformance testing by UNIFIX
mtrr: v1.22 (19980611) Richard Gooch (rgooch at atnf.csiro.au)
CPU0: Intel Pentium II (Klamath) stepping 04
SMP motherboard not detected. Using dummy APIC emulation.
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Swansea University Computer Society NET3.039 for Linux 2.1
NET3: Unix domain sockets 0.16 for Linux NET3.038.
Swansea University Computer Society TCP/IP for NET3.037
IP Protocols: ICMP, UDP, TCP
PCI: PCI BIOS revision 2.10 entry at 0xf0750
PCI: Using configuration type 1
PCI: Probing PCI hardware
Starting kswapd v 1.5
pty: 256 Unix98 ptys configured
PS/2 auxiliary pointing device detected -- driver installed.
APM BIOS version 1.2 Flags 0x0b (Driver version 1.4)
Entry f000:7810 cseg16 f000 dseg fdbc cseg len e6ff, cseg16 len 15, dseg len 22a
Connection version 1.2
AC on line, battery status unknown, battery life unknown
battery flag 0x80, battery life unknown
PIIX4: IDE controller on PCI bus 00 dev 21
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xc800-0xc807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xc808-0xc80f, BIOS settings: hdc:pio, hdd:pio
hda: IBM-DHEA-38451, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: IBM-DHEA-38451, 8063MB w/472kB Cache, CHS=1024/255/63, UDMA
(scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> found at PCI 6/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 407 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.0pre7/3.2.4
<Adaptec AIC-7890/1 Ultra2 SCSI host adapter>
scsi : 1 host.
Vendor: QUANTUM Model: FIREBALL_TM3200S Rev: 300X
Type: Direct-Access ANSI SCSI revision: 02
(scsi0:0:1:0) Synchronous at 20.0 Mbyte/sec, offset 15.
Vendor: PIONEER Model: CD-ROM DR-U06S Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
(scsi0:0:2:0) Synchronous at 16.0 Mbyte/sec, offset 16.
Vendor: TEAC Model: CD-R55S Rev: 1.0J
Type: CD-ROM ANSI SCSI revision: 02
scsi : detected total.
Found Intel i82557 PCI Speedo at I/O 0xb800, IRQ 11.
PCI latency timer (CFLT) is unreasonably low at 0. Setting to 255 clocks.
eepro100.c:v0.36 10/20/97 Donald Becker linux-eepro100 at cesdis.gsfc.nasa.gov
eth0: Intel EtherExpress Pro 10/100 at 0xb800, 00:E0:18:90:14:C5, IRQ 11.
Board assembly 668081-002, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x24c9f043).
Receiver lock-up workaround activated.
eepro100.c:v0.36 10/20/97 Donald Becker linux-eepro100 at cesdis.gsfc.nasa.gov
Partition check:
hda: hda1 hda2 < hda5 hda6 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 40k freed
Adding Swap: 130748k swap-space (priority -2)
more uses obsolete /proc/pci interface
More information about the aic7xxx
mailing list