svn commit: r335627 - stable/10/sys/dev/usb/serial

[Andriy Gapon]

Author: avg
Date: Mon Jun 25 08:57:03 2018
New Revision: 335627
URL: https://svnweb.freebsd.org/changeset/base/335627

Log:
  MFC r334002: uchcom: extend hardware support to version 0x30

Modified:
  stable/10/sys/dev/usb/serial/uchcom.c
Directory Properties:
  stable/10/   (props changed)

Modified: stable/10/sys/dev/usb/serial/uchcom.c
==============================================================================
--- stable/10/sys/dev/usb/serial/uchcom.c	Mon Jun 25 08:56:30 2018	(r335626)
+++ stable/10/sys/dev/usb/serial/uchcom.c	Mon Jun 25 08:57:03 2018	(r335627)
@@ -124,6 +124,7 @@ SYSCTL_INT(_hw_usb_uchcom, OID_AUTO, debug, CTLFLAG_RW
 #define	UCHCOM_REG_LCR2		0x25
 
 #define	UCHCOM_VER_20		0x20
+#define	UCHCOM_VER_30		0x30
 
 #define	UCHCOM_BASE_UNKNOWN	0
 #define	UCHCOM_BPS_MOD_BASE	20000000
@@ -703,11 +704,26 @@ uchcom_cfg_param(struct ucom_softc *ucom, struct termi
 {
 	struct uchcom_softc *sc = ucom->sc_parent;
 
-	uchcom_get_version(sc, 0);
+	uchcom_get_version(sc, NULL);
 	uchcom_ctrl_write(sc, UCHCOM_REQ_RESET, 0, 0);
 	uchcom_set_baudrate(sc, t->c_ospeed);
-	uchcom_read_reg(sc, 0x18, 0, 0x25, 0);
-	uchcom_write_reg(sc, 0x18, 0x50, 0x25, 0x00);
+	if (sc->sc_version < UCHCOM_VER_30) {
+		uchcom_read_reg(sc, UCHCOM_REG_LCR1, NULL,
+		    UCHCOM_REG_LCR2, NULL);
+		uchcom_write_reg(sc, UCHCOM_REG_LCR1, 0x50,
+		    UCHCOM_REG_LCR2, 0x00);
+	} else {
+		/*
+		 * Set up line control:
+		 * - enable transmit and receive
+		 * - set 8n1 mode
+		 * To do: support other sizes, parity, stop bits.
+		 */
+		uchcom_write_reg(sc,
+		    UCHCOM_REG_LCR1,
+		    UCHCOM_LCR1_RX | UCHCOM_LCR1_TX | UCHCOM_LCR1_CS8,
+		    UCHCOM_REG_LCR2, 0x00);
+	}
 	uchcom_update_status(sc);
 	uchcom_ctrl_write(sc, UCHCOM_REQ_RESET, 0x501f, 0xd90a);
 	uchcom_set_baudrate(sc, t->c_ospeed);