svn commit: r260961 - in stable/9: sbin/camcontrol sys/cam/scsi

Alexander Motin mav at FreeBSD.org
Tue Jan 21 00:16:42 UTC 2014


Author: mav
Date: Tue Jan 21 00:16:41 2014
New Revision: 260961
URL: http://svnweb.freebsd.org/changeset/base/260961

Log:
  MFC r255307 (by bryanv):
  Add camcontrol support for the SCSI sanitize command

Modified:
  stable/9/sbin/camcontrol/camcontrol.8
  stable/9/sbin/camcontrol/camcontrol.c
  stable/9/sys/cam/scsi/scsi_da.c
  stable/9/sys/cam/scsi/scsi_da.h
Directory Properties:
  stable/9/   (props changed)
  stable/9/sbin/   (props changed)
  stable/9/sbin/camcontrol/   (props changed)
  stable/9/sys/   (props changed)

Modified: stable/9/sbin/camcontrol/camcontrol.8
==============================================================================
--- stable/9/sbin/camcontrol/camcontrol.8	Tue Jan 21 00:14:06 2014	(r260960)
+++ stable/9/sbin/camcontrol/camcontrol.8	Tue Jan 21 00:16:41 2014	(r260961)
@@ -207,6 +207,19 @@
 .Op Fl w
 .Op Fl y
 .Nm
+.Ic sanitize
+.Op device id
+.Op generic args
+.Aq Fl a Ar overwrite | block | crypto | exitfailure
+.Op Fl c Ar passes
+.Op Fl I
+.Op Fl P Ar pattern
+.Op Fl q
+.Op Fl U
+.Op Fl r
+.Op Fl w
+.Op Fl y
+.Nm
 .Ic idle
 .Op device id
 .Op generic args
@@ -1088,6 +1101,116 @@ The user
 will not be asked about the timeout if a timeout is specified on the
 command line.
 .El
+.It Ic sanitize
+Issue the
+.Tn SCSI
+SANITIZE command to the named device.
+.Pp
+.Em WARNING! WARNING! WARNING!
+.Pp
+ALL data in the cache and on the disk will be destroyed or made inaccessible.
+Recovery of the data is not possible.
+Use extreme caution when issuing this command.
+.Pp
+The
+.Sq sanitize
+subcommand takes several arguments that modify its default behavior.
+The
+.Fl q
+and
+.Fl y
+arguments can be useful for scripts.
+.Bl -tag -width 6n
+.It Fl a Ar operation
+Specify the sanitize operation to perform.
+.Bl -tag -width 16n
+.It overwrite
+Perform an overwrite operation by writing a user supplied
+data pattern to the device one or more times.
+The pattern is given by the
+.Fl P
+argument.
+The number of times is given by the
+.Fl c
+argument.
+.It block
+Perform a block erase operation.
+All the device's blocks are set to a vendor defined
+value, typically zero.
+.It crypto
+Perform a cryptographic erase operation.
+The encryption keys are changed to prevent the decryption
+of the data.
+.It exitfailure
+Exits a previously failed sanitize operation.
+A failed sanitize operation can only be exited if it was
+run in the unrestricted completion mode, as provided by the
+.Fl U
+argument.
+.El
+.It Fl c Ar passes
+The number of passes when performing an
+.Sq overwrite
+operation.
+Valid values are between 1 and 31. The default is 1.
+.It Fl I
+When performing an
+.Sq overwrite
+operation, the pattern is inverted between consecutive passes.
+.It Fl P Ar pattern
+Path to the file containing the pattern to use when
+performing an
+.Sq overwrite
+operation.
+The pattern is repeated as needed to fill each block.
+.It Fl q
+Be quiet, do not print any status messages.
+This option will not disable
+the questions, however.
+To disable questions, use the
+.Fl y
+argument, below.
+.It Fl U
+Perform the sanitize in the unrestricted completion mode.
+If the operation fails, it can later be exited with the
+.Sq exitfailure
+operation.
+.It Fl r
+Run in
+.Dq report only
+mode.
+This will report status on a sanitize that is already running on the drive.
+.It Fl w
+Issue a non-immediate sanitize command.
+By default,
+.Nm
+issues the SANITIZE command with the immediate bit set.
+This tells the
+device to immediately return the sanitize command, before
+the sanitize has actually completed.
+Then,
+.Nm
+gathers
+.Tn SCSI
+sense information from the device every second to determine how far along
+in the sanitize process it is.
+If the
+.Fl w
+argument is specified,
+.Nm
+will issue a non-immediate sanitize command, and will be unable to print any
+information to let the user know what percentage of the disk has been
+sanitized.
+.It Fl y
+Do not ask any questions.
+By default,
+.Nm
+will ask the user if he/she really wants to sanitize the disk in question,
+and also if the default sanitize command timeout is acceptable.
+The user
+will not be asked about the timeout if a timeout is specified on the
+command line.
+.El
 .It Ic idle
 Put ATA device into IDLE state. Optional parameter
 .Pq Fl t

Modified: stable/9/sbin/camcontrol/camcontrol.c
==============================================================================
--- stable/9/sbin/camcontrol/camcontrol.c	Tue Jan 21 00:14:06 2014	(r260960)
+++ stable/9/sbin/camcontrol/camcontrol.c	Tue Jan 21 00:16:41 2014	(r260961)
@@ -32,6 +32,7 @@ __FBSDID("$FreeBSD$");
 #include <sys/ioctl.h>
 #include <sys/stdint.h>
 #include <sys/types.h>
+#include <sys/stat.h>
 #include <sys/endian.h>
 #include <sys/sbuf.h>
 
@@ -93,7 +94,8 @@ typedef enum {
 	CAM_CMD_SMP_MANINFO	= 0x0000001b,
 	CAM_CMD_DOWNLOAD_FW	= 0x0000001c,
 	CAM_CMD_SECURITY	= 0x0000001d,
-	CAM_CMD_HPA		= 0x0000001e
+	CAM_CMD_HPA		= 0x0000001e,
+	CAM_CMD_SANITIZE	= 0x0000001f,
 } cam_cmdmask;
 
 typedef enum {
@@ -209,6 +211,7 @@ static struct camcontrol_opts option_tab
 	{"rate", CAM_CMD_RATE, CAM_ARG_NONE, negotiate_opts},
 	{"debug", CAM_CMD_DEBUG, CAM_ARG_NONE, "IPTSXcp"},
 	{"format", CAM_CMD_FORMAT, CAM_ARG_NONE, "qrwy"},
+	{"sanitize", CAM_CMD_SANITIZE, CAM_ARG_NONE, "a:c:IP:qrUwy"},
 	{"idle", CAM_CMD_IDLE, CAM_ARG_NONE, "t:"},
 	{"standby", CAM_CMD_STANDBY, CAM_ARG_NONE, "t:"},
 	{"sleep", CAM_CMD_SLEEP, CAM_ARG_NONE, ""},
@@ -301,6 +304,8 @@ static int ratecontrol(struct cam_device
 		       int timeout, int argc, char **argv, char *combinedopt);
 static int scsiformat(struct cam_device *device, int argc, char **argv,
 		      char *combinedopt, int retry_count, int timeout);
+static int scsisanitize(struct cam_device *device, int argc, char **argv,
+			char *combinedopt, int retry_count, int timeout);
 static int scsireportluns(struct cam_device *device, int argc, char **argv,
 			  char *combinedopt, int retry_count, int timeout);
 static int scsireadcapacity(struct cam_device *device, int argc, char **argv,
@@ -5537,6 +5542,402 @@ scsiformat_bailout:
 }
 
 static int
+scsisanitize(struct cam_device *device, int argc, char **argv,
+	     char *combinedopt, int retry_count, int timeout)
+{
+	union ccb *ccb;
+	u_int8_t action = 0;
+	int c;
+	int ycount = 0, quiet = 0;
+	int error = 0, retval = 0;
+	int use_timeout = 10800 * 1000;
+	int immediate = 1;
+	int invert = 0;
+	int passes = 0;
+	int ause = 0;
+	int fd = -1;
+	const char *pattern = NULL;
+	u_int8_t *data_ptr = NULL;
+	u_int32_t dxfer_len = 0;
+	u_int8_t byte2 = 0;
+	int num_warnings = 0;
+	int reportonly = 0;
+
+	ccb = cam_getccb(device);
+
+	if (ccb == NULL) {
+		warnx("scsisanitize: error allocating ccb");
+		return(1);
+	}
+
+	bzero(&(&ccb->ccb_h)[1],
+	      sizeof(struct ccb_scsiio) - sizeof(struct ccb_hdr));
+
+	while ((c = getopt(argc, argv, combinedopt)) != -1) {
+		switch(c) {
+		case 'a':
+			if (strcasecmp(optarg, "overwrite") == 0)
+				action = SSZ_SERVICE_ACTION_OVERWRITE;
+			else if (strcasecmp(optarg, "block") == 0)
+				action = SSZ_SERVICE_ACTION_BLOCK_ERASE;
+			else if (strcasecmp(optarg, "crypto") == 0)
+				action = SSZ_SERVICE_ACTION_CRYPTO_ERASE;
+			else if (strcasecmp(optarg, "exitfailure") == 0)
+				action = SSZ_SERVICE_ACTION_EXIT_MODE_FAILURE;
+			else {
+				warnx("invalid service operation \"%s\"",
+				      optarg);
+				error = 1;
+				goto scsisanitize_bailout;
+			}
+			break;
+		case 'c':
+			passes = strtol(optarg, NULL, 0);
+			if (passes < 1 || passes > 31) {
+				warnx("invalid passes value %d", passes);
+				error = 1;
+				goto scsisanitize_bailout;
+			}
+			break;
+		case 'I':
+			invert = 1;
+			break;
+		case 'P':
+			pattern = optarg;
+			break;
+		case 'q':
+			quiet++;
+			break;
+		case 'U':
+			ause = 1;
+			break;
+		case 'r':
+			reportonly = 1;
+			break;
+		case 'w':
+			immediate = 0;
+			break;
+		case 'y':
+			ycount++;
+			break;
+		}
+	}
+
+	if (reportonly)
+		goto doreport;
+
+	if (action == 0) {
+		warnx("an action is required");
+		error = 1;
+		goto scsisanitize_bailout;
+	} else if (action == SSZ_SERVICE_ACTION_OVERWRITE) {
+		struct scsi_sanitize_parameter_list *pl;
+		struct stat sb;
+		ssize_t sz, amt;
+
+		if (pattern == NULL) {
+			warnx("overwrite action requires -P argument");
+			error = 1;
+			goto scsisanitize_bailout;
+		}
+		fd = open(pattern, O_RDONLY);
+		if (fd < 0) {
+			warn("cannot open pattern file %s", pattern);
+			error = 1;
+			goto scsisanitize_bailout;
+		}
+		if (fstat(fd, &sb) < 0) {
+			warn("cannot stat pattern file %s", pattern);
+			error = 1;
+			goto scsisanitize_bailout;
+		}
+		sz = sb.st_size;
+		if (sz > SSZPL_MAX_PATTERN_LENGTH) {
+			warnx("pattern file size exceeds maximum value %d",
+			      SSZPL_MAX_PATTERN_LENGTH);
+			error = 1;
+			goto scsisanitize_bailout;
+		}
+		dxfer_len = sizeof(*pl) + sz;
+		data_ptr = calloc(1, dxfer_len);
+		if (data_ptr == NULL) {
+			warnx("cannot allocate parameter list buffer");
+			error = 1;
+			goto scsisanitize_bailout;
+		}
+
+		amt = read(fd, data_ptr + sizeof(*pl), sz);
+		if (amt < 0) {
+			warn("cannot read pattern file");
+			error = 1;
+			goto scsisanitize_bailout;
+		} else if (amt != sz) {
+			warnx("short pattern file read");
+			error = 1;
+			goto scsisanitize_bailout;
+		}
+
+		pl = (struct scsi_sanitize_parameter_list *)data_ptr;
+		if (passes == 0)
+			pl->byte1 = 1;
+		else
+			pl->byte1 = passes;
+		if (invert != 0)
+			pl->byte1 |= SSZPL_INVERT;
+		scsi_ulto2b(sz, pl->length);
+	} else {
+		const char *arg;
+
+		if (passes != 0)
+			arg = "-c";
+		else if (invert != 0)
+			arg = "-I";
+		else if (pattern != NULL)
+			arg = "-P";
+		else
+			arg = NULL;
+		if (arg != NULL) {
+			warnx("%s argument only valid with overwrite "
+			      "operation", arg);
+			error = 1;
+			goto scsisanitize_bailout;
+		}
+	}
+
+	if (quiet == 0) {
+		fprintf(stdout, "You are about to REMOVE ALL DATA from the "
+			"following device:\n");
+
+		error = scsidoinquiry(device, argc, argv, combinedopt,
+				      retry_count, timeout);
+
+		if (error != 0) {
+			warnx("scsisanitize: error sending inquiry");
+			goto scsisanitize_bailout;
+		}
+	}
+
+	if (ycount == 0) {
+		if (!get_confirmation()) {
+			error = 1;
+			goto scsisanitize_bailout;
+		}
+	}
+
+	if (timeout != 0)
+		use_timeout = timeout;
+
+	if (quiet == 0) {
+		fprintf(stdout, "Current sanitize timeout is %d seconds\n",
+			use_timeout / 1000);
+	}
+
+	/*
+	 * If the user hasn't disabled questions and didn't specify a
+	 * timeout on the command line, ask them if they want the current
+	 * timeout.
+	 */
+	if ((ycount == 0)
+	 && (timeout == 0)) {
+		char str[1024];
+		int new_timeout = 0;
+
+		fprintf(stdout, "Enter new timeout in seconds or press\n"
+			"return to keep the current timeout [%d] ",
+			use_timeout / 1000);
+
+		if (fgets(str, sizeof(str), stdin) != NULL) {
+			if (str[0] != '\0')
+				new_timeout = atoi(str);
+		}
+
+		if (new_timeout != 0) {
+			use_timeout = new_timeout * 1000;
+			fprintf(stdout, "Using new timeout value %d\n",
+				use_timeout / 1000);
+		}
+	}
+
+	byte2 = action;
+	if (ause != 0)
+		byte2 |= SSZ_UNRESTRICTED_EXIT;
+	if (immediate != 0)
+		byte2 |= SSZ_IMMED;
+
+	scsi_sanitize(&ccb->csio,
+		      /* retries */ retry_count,
+		      /* cbfcnp */ NULL,
+		      /* tag_action */ MSG_SIMPLE_Q_TAG,
+		      /* byte2 */ byte2,
+		      /* control */ 0,
+		      /* data_ptr */ data_ptr,
+		      /* dxfer_len */ dxfer_len,
+		      /* sense_len */ SSD_FULL_SIZE,
+		      /* timeout */ use_timeout);
+
+	/* Disable freezing the device queue */
+	ccb->ccb_h.flags |= CAM_DEV_QFRZDIS;
+
+	if (arglist & CAM_ARG_ERR_RECOVER)
+		ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER;
+
+	if (((retval = cam_send_ccb(device, ccb)) < 0)
+	 || ((immediate == 0)
+	   && ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP))) {
+		const char errstr[] = "error sending sanitize command";
+
+		if (retval < 0)
+			warn(errstr);
+		else
+			warnx(errstr);
+
+		if (arglist & CAM_ARG_VERBOSE) {
+			cam_error_print(device, ccb, CAM_ESF_ALL,
+					CAM_EPF_ALL, stderr);
+		}
+		error = 1;
+		goto scsisanitize_bailout;
+	}
+
+	/*
+	 * If we ran in non-immediate mode, we already checked for errors
+	 * above and printed out any necessary information.  If we're in
+	 * immediate mode, we need to loop through and get status
+	 * information periodically.
+	 */
+	if (immediate == 0) {
+		if (quiet == 0) {
+			fprintf(stdout, "Sanitize Complete\n");
+		}
+		goto scsisanitize_bailout;
+	}
+
+doreport:
+	do {
+		cam_status status;
+
+		bzero(&(&ccb->ccb_h)[1],
+		      sizeof(struct ccb_scsiio) - sizeof(struct ccb_hdr));
+
+		/*
+		 * There's really no need to do error recovery or
+		 * retries here, since we're just going to sit in a
+		 * loop and wait for the device to finish sanitizing.
+		 */
+		scsi_test_unit_ready(&ccb->csio,
+				     /* retries */ 0,
+				     /* cbfcnp */ NULL,
+				     /* tag_action */ MSG_SIMPLE_Q_TAG,
+				     /* sense_len */ SSD_FULL_SIZE,
+				     /* timeout */ 5000);
+
+		/* Disable freezing the device queue */
+		ccb->ccb_h.flags |= CAM_DEV_QFRZDIS;
+
+		retval = cam_send_ccb(device, ccb);
+
+		/*
+		 * If we get an error from the ioctl, bail out.  SCSI
+		 * errors are expected.
+		 */
+		if (retval < 0) {
+			warn("error sending CAMIOCOMMAND ioctl");
+			if (arglist & CAM_ARG_VERBOSE) {
+				cam_error_print(device, ccb, CAM_ESF_ALL,
+						CAM_EPF_ALL, stderr);
+			}
+			error = 1;
+			goto scsisanitize_bailout;
+		}
+
+		status = ccb->ccb_h.status & CAM_STATUS_MASK;
+
+		if ((status != CAM_REQ_CMP)
+		 && (status == CAM_SCSI_STATUS_ERROR)
+		 && ((ccb->ccb_h.status & CAM_AUTOSNS_VALID) != 0)) {
+			struct scsi_sense_data *sense;
+			int error_code, sense_key, asc, ascq;
+
+			sense = &ccb->csio.sense_data;
+			scsi_extract_sense_len(sense, ccb->csio.sense_len -
+			    ccb->csio.sense_resid, &error_code, &sense_key,
+			    &asc, &ascq, /*show_errors*/ 1);
+
+			/*
+			 * According to the SCSI-3 spec, a drive that is in the
+			 * middle of a sanitize should return NOT READY with an
+			 * ASC of "logical unit not ready, sanitize in
+			 * progress". The sense key specific bytes will then
+			 * be a progress indicator.
+			 */
+			if ((sense_key == SSD_KEY_NOT_READY)
+			 && (asc == 0x04) && (ascq == 0x1b)) {
+				uint8_t sks[3];
+
+				if ((scsi_get_sks(sense, ccb->csio.sense_len -
+				     ccb->csio.sense_resid, sks) == 0)
+				 && (quiet == 0)) {
+					int val;
+					u_int64_t percentage;
+
+					val = scsi_2btoul(&sks[1]);
+					percentage = 10000 * val;
+
+					fprintf(stdout,
+						"\rSanitizing:  %ju.%02u %% "
+						"(%d/%d) done",
+						(uintmax_t)(percentage /
+						(0x10000 * 100)),
+						(unsigned)((percentage /
+						0x10000) % 100),
+						val, 0x10000);
+					fflush(stdout);
+				} else if ((quiet == 0)
+					&& (++num_warnings <= 1)) {
+					warnx("Unexpected SCSI Sense Key "
+					      "Specific value returned "
+					      "during sanitize:");
+					scsi_sense_print(device, &ccb->csio,
+							 stderr);
+					warnx("Unable to print status "
+					      "information, but sanitze will "
+					      "proceed.");
+					warnx("will exit when sanitize is "
+					      "complete");
+				}
+				sleep(1);
+			} else {
+				warnx("Unexpected SCSI error during sanitize");
+				cam_error_print(device, ccb, CAM_ESF_ALL,
+						CAM_EPF_ALL, stderr);
+				error = 1;
+				goto scsisanitize_bailout;
+			}
+
+		} else if (status != CAM_REQ_CMP) {
+			warnx("Unexpected CAM status %#x", status);
+			if (arglist & CAM_ARG_VERBOSE)
+				cam_error_print(device, ccb, CAM_ESF_ALL,
+						CAM_EPF_ALL, stderr);
+			error = 1;
+			goto scsisanitize_bailout;
+		}
+	} while((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP);
+
+	if (quiet == 0)
+		fprintf(stdout, "\nSanitize Complete\n");
+
+scsisanitize_bailout:
+	if (fd >= 0)
+		close(fd);
+	if (data_ptr != NULL)
+		free(data_ptr);
+	cam_freeccb(ccb);
+
+	return(error);
+}
+
+static int
 scsireportluns(struct cam_device *device, int argc, char **argv,
 	       char *combinedopt, int retry_count, int timeout)
 {
@@ -7360,6 +7761,10 @@ usage(int printlong)
 "                              [-q][-R syncrate][-v][-T <enable|disable>]\n"
 "                              [-U][-W bus_width]\n"
 "        camcontrol format     [dev_id][generic args][-q][-r][-w][-y]\n"
+"        camcontrol sanitize   [dev_id][generic args]\n"
+"                              [-a overwrite|block|crypto|exitfailure]\n"
+"                              [-c passes][-I][-P pattern][-q][-U][-r][-w]\n"
+"                              [-y]\n"
 "        camcontrol idle       [dev_id][generic args][-t time]\n"
 "        camcontrol standby    [dev_id][generic args][-t time]\n"
 "        camcontrol sleep      [dev_id][generic args]\n"
@@ -7402,6 +7807,7 @@ usage(int printlong)
 "tags        report or set the number of transaction slots for a device\n"
 "negotiate   report or set device negotiation parameters\n"
 "format      send the SCSI FORMAT UNIT command to the named device\n"
+"sanitize    send the SCSI SANITIZE command to the named device\n"
 "idle        send the ATA IDLE command to the named device\n"
 "standby     send the ATA STANDBY command to the named device\n"
 "sleep       send the ATA SLEEP command to the named device\n"
@@ -7497,6 +7903,16 @@ usage(int printlong)
 "-r                run in report only mode\n"
 "-w                don't send immediate format command\n"
 "-y                don't ask any questions\n"
+"sanitize arguments:\n"
+"-a operation      operation mode: overwrite, block, crypto or exitfailure\n"
+"-c passes         overwrite passes to perform (1 to 31)\n"
+"-I                invert overwrite pattern after each pass\n"
+"-P pattern        path to overwrite pattern file\n"
+"-q                be quiet, don't print status messages\n"
+"-r                run in report only mode\n"
+"-U                run operation in unrestricted completion exit mode\n"
+"-w                don't send immediate sanitize command\n"
+"-y                don't ask any questions\n"
 "idle/standby arguments:\n"
 "-t <arg>          number of seconds before respective state.\n"
 "fwdownload arguments:\n"
@@ -7859,6 +8275,10 @@ main(int argc, char **argv)
 			    arglist & CAM_ARG_VERBOSE, retry_count, timeout,
 			    get_disk_type(cam_dev));
 			break;
+		case CAM_CMD_SANITIZE:
+			error = scsisanitize(cam_dev, argc, argv,
+					     combinedopt, retry_count, timeout);
+			break;
 #endif /* MINIMALISTIC */
 		case CAM_CMD_USAGE:
 			usage(1);

Modified: stable/9/sys/cam/scsi/scsi_da.c
==============================================================================
--- stable/9/sys/cam/scsi/scsi_da.c	Tue Jan 21 00:14:06 2014	(r260960)
+++ stable/9/sys/cam/scsi/scsi_da.c	Tue Jan 21 00:16:41 2014	(r260961)
@@ -3841,4 +3841,31 @@ scsi_format_unit(struct ccb_scsiio *csio
 		      timeout);
 }
 
+void
+scsi_sanitize(struct ccb_scsiio *csio, u_int32_t retries,
+	      void (*cbfcnp)(struct cam_periph *, union ccb *),
+	      u_int8_t tag_action, u_int8_t byte2, u_int16_t control,
+	      u_int8_t *data_ptr, u_int32_t dxfer_len, u_int8_t sense_len,
+	      u_int32_t timeout)
+{
+	struct scsi_sanitize *scsi_cmd;
+
+	scsi_cmd = (struct scsi_sanitize *)&csio->cdb_io.cdb_bytes;
+	scsi_cmd->opcode = SANITIZE;
+	scsi_cmd->byte2 = byte2;
+	scsi_cmd->control = control;
+	scsi_ulto2b(dxfer_len, scsi_cmd->length);
+
+	cam_fill_csio(csio,
+		      retries,
+		      cbfcnp,
+		      /*flags*/ (dxfer_len > 0) ? CAM_DIR_OUT : CAM_DIR_NONE,
+		      tag_action,
+		      data_ptr,
+		      dxfer_len,
+		      sense_len,
+		      sizeof(*scsi_cmd),
+		      timeout);
+}
+
 #endif /* _KERNEL */

Modified: stable/9/sys/cam/scsi/scsi_da.h
==============================================================================
--- stable/9/sys/cam/scsi/scsi_da.h	Tue Jan 21 00:14:06 2014	(r260960)
+++ stable/9/sys/cam/scsi/scsi_da.h	Tue Jan 21 00:16:41 2014	(r260961)
@@ -116,6 +116,31 @@ struct scsi_read_defect_data_10
 	u_int8_t control;
 };
 
+struct scsi_sanitize
+{
+	u_int8_t opcode;
+	u_int8_t byte2;
+#define SSZ_SERVICE_ACTION_OVERWRITE         0x01
+#define SSZ_SERVICE_ACTION_BLOCK_ERASE       0x02
+#define SSZ_SERVICE_ACTION_CRYPTO_ERASE      0x03
+#define SSZ_SERVICE_ACTION_EXIT_MODE_FAILURE 0x1F
+#define SSZ_UNRESTRICTED_EXIT                0x20
+#define SSZ_IMMED                            0x80
+	u_int8_t reserved[5];
+	u_int8_t length[2];
+	u_int8_t control;
+};
+
+struct scsi_sanitize_parameter_list
+{
+	u_int8_t byte1;
+#define SSZPL_INVERT 0x80
+	u_int8_t reserved;
+	u_int8_t length[2];
+	/* Variable length initialization pattern. */
+#define SSZPL_MAX_PATTERN_LENGTH 65535
+};
+
 struct scsi_read_defect_data_12
 {
 	u_int8_t opcode;
@@ -156,6 +181,7 @@ struct scsi_read_defect_data_12
 #define	WRITE_AND_VERIFY	0x2e
 #define	VERIFY			0x2f
 #define READ_DEFECT_DATA_10	0x37
+#define SANITIZE		0x48
 #define READ_DEFECT_DATA_12	0xb7
 
 struct format_defect_list_header
@@ -508,6 +534,12 @@ void scsi_format_unit(struct ccb_scsiio 
 		      u_int8_t *data_ptr, u_int32_t dxfer_len,
 		      u_int8_t sense_len, u_int32_t timeout);
 
+void scsi_sanitize(struct ccb_scsiio *csio, u_int32_t retries,
+		   void (*cbfcnp)(struct cam_periph *, union ccb *),
+		   u_int8_t tag_action, u_int8_t byte2, u_int16_t control,
+		   u_int8_t *data_ptr, u_int32_t dxfer_len, u_int8_t sense_len,
+		   u_int32_t timeout);
+
 #endif /* !_KERNEL */
 __END_DECLS
 


More information about the svn-src-stable-9 mailing list