svn commit: r218347 - stable/8/sys/dev/ata/chipsets
bob at immure.com
Sun Mar 20 14:15:17 UTC 2011
On Thu, Mar 17, 2011 at 01:41:30AM +0200, Alexander Motin wrote:
> On 16.03.2011 15:51, Bob Willcox wrote:
> > This change has broken SATA disk support on my Intel Atom D525 ITX system. By
> > reverting this change 8.2-STABLE works again on this system.
> > My 'uname -a' output is:
> > FreeBSD maul.immure.com 8.2-STABLE FreeBSD 8.2-STABLE #6: Wed Mar 16 08:15:43 CDT 2011 bob at maul.immure.com:/usr/obj/usr/src/sys/MAUL amd64
> > When booting the system I get tons of these messages:
> > Mar 16 07:38:19 maul kernel: ad4: WARNING - SETFEATURES ENABLE RCACHE requeued due to channel reset
> > Mar 16 07:38:19 maul kernel: ad4: interrupt on idle channel ignored
> As I can see, it means that channel has some active request, but it is
> in IDLE state. It is strange, but I won't be surprised much if it is the
> result of some locking problem in ata(4) in non-CAM mode.
> > repeated over and over, and then lots of these:
> > Mar 16 07:38:21 maul kernel: ad4: WARNING - READ_DMA48 requeued due to channel reset LBA=617964479
> > Mar 16 07:38:21 maul kernel: ata2: FAILURE - already active DMA on this device
> > Mar 16 07:38:21 maul kernel: ata2: setting up DMA failed
> > for different LBA values.
> > As one might expect, I then start seeing I/O errors on the disk and programs
> > failing
> > I've attached the 'pciconf -lv' output.
> Send me please full verbose log, if you can save it. I am especially
> interested in place around first errors.
> You may try to build kernel with `options ATA_CAM` to see if it helps.
> I've mostly tested this patch in that mode.
I tried setting `options ATA_CAM` but that didn't fix the problem. I still got
continuous ATA error messages spewed out while probing the ATA devices. I'm
not able to capture the verbose output as the system never successfully boots
and I don't have a serial console attached to the system.
For now, I plan to stay with the previous version of ata-intel.c since this is
my gateway system and I need for it to 'just work'. :(
> > On Sat, Feb 05, 2011 at 09:34:27PM +0000, Alexander Motin wrote:
> >> Author: mav
> >> Date: Sat Feb 5 21:34:26 2011
> >> New Revision: 218347
> >> URL: http://svn.freebsd.org/changeset/base/218347
> >> Log:
> >> MFC r217774:
> >> ICH7 SATA controller in legacy mode can provide access to SATA registers
> >> via AHCI-like memory resource at BAR(5). Use it if BIOS was so kind to
> >> allocate memory for that BAR. This allows hot-plug support and connection
> >> speed reporting.
> Alexander Motin
Bob Willcox Trying to explain things to people who already know
bob at immure.com everything is like trying to teach a bear to dance;
Austin, TX it's useless, and it annoys the bear.
More information about the svn-src-stable-8