svn commit: r187074 - in stable/7/sys: . contrib/pf dev/ath/ath_hal
dev/cxgb dev/mii
Pyun YongHyeon
yongari at FreeBSD.org
Sun Jan 11 18:44:26 PST 2009
Author: yongari
Date: Mon Jan 12 02:44:23 2009
New Revision: 187074
URL: http://svn.freebsd.org/changeset/base/187074
Log:
MFC r183493:
Save extended address register prior to switching to 1000BASE-X
only mode and restore original value of extended address register
instead of overwriting it with page 1. There are still instance
information passing issue(e.g configured media type: fiber or
copper) from driver to PHY layer but this change make the selected
PHY work with 88E1112 PHY.
Reported by: Krzysztof Jedruczyk < beaker <at> hot dot pl >
Tested by: Krzysztof Jedruczyk < beaker <at> hot dot pl >
Modified:
stable/7/sys/ (props changed)
stable/7/sys/contrib/pf/ (props changed)
stable/7/sys/dev/ath/ath_hal/ (props changed)
stable/7/sys/dev/cxgb/ (props changed)
stable/7/sys/dev/mii/e1000phy.c
Modified: stable/7/sys/dev/mii/e1000phy.c
==============================================================================
--- stable/7/sys/dev/mii/e1000phy.c Mon Jan 12 02:31:22 2009 (r187073)
+++ stable/7/sys/dev/mii/e1000phy.c Mon Jan 12 02:44:23 2009 (r187074)
@@ -223,7 +223,7 @@ static void
e1000phy_reset(struct mii_softc *sc)
{
struct e1000phy_softc *esc;
- uint16_t reg;
+ uint16_t reg, page;
esc = (struct e1000phy_softc *)sc;
reg = PHY_READ(sc, E1000_SCR);
@@ -232,12 +232,13 @@ e1000phy_reset(struct mii_softc *sc)
PHY_WRITE(sc, E1000_SCR, reg);
if (esc->mii_model == MII_MODEL_MARVELL_E1112) {
/* Select 1000BASE-X only mode. */
+ page = PHY_READ(sc, E1000_EADR);
PHY_WRITE(sc, E1000_EADR, 2);
reg = PHY_READ(sc, E1000_SCR);
reg &= ~E1000_SCR_MODE_MASK;
reg |= E1000_SCR_MODE_1000BX;
PHY_WRITE(sc, E1000_SCR, reg);
- PHY_WRITE(sc, E1000_EADR, 1);
+ PHY_WRITE(sc, E1000_EADR, page);
}
} else {
switch (esc->mii_model) {
More information about the svn-src-stable-7
mailing list