svn commit: r259351 - stable/10/sys/arm/freescale/imx

Ian Lepore ian at FreeBSD.org
Fri Dec 13 22:26:11 UTC 2013


Author: ian
Date: Fri Dec 13 22:26:10 2013
New Revision: 259351
URL: http://svnweb.freebsd.org/changeset/base/259351

Log:
  MFC r257452:  Add support for the USB PHY on imx6 SoCs.

Added:
  stable/10/sys/arm/freescale/imx/imx6_usbphy.c
     - copied unchanged from r257452, head/sys/arm/freescale/imx/imx6_usbphy.c
Modified:
Directory Properties:
  stable/10/   (props changed)

Copied: stable/10/sys/arm/freescale/imx/imx6_usbphy.c (from r257452, head/sys/arm/freescale/imx/imx6_usbphy.c)
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ stable/10/sys/arm/freescale/imx/imx6_usbphy.c	Fri Dec 13 22:26:10 2013	(r259351, copy of r257452, head/sys/arm/freescale/imx/imx6_usbphy.c)
@@ -0,0 +1,189 @@
+/*-
+ * Copyright (c) 2013 Ian Lepore <ian at freebsd.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+/*
+ * USBPHY driver for Freescale i.MX6 family of SoCs.
+ */
+
+#include "opt_bus.h"
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/kernel.h>
+#include <sys/module.h>
+#include <sys/bus.h>
+#include <sys/rman.h>
+
+#include <dev/ofw/ofw_bus.h>
+#include <dev/ofw/ofw_bus_subr.h>
+
+#include <machine/bus.h>
+
+#include <arm/freescale/imx/imx_machdep.h>
+#include <arm/freescale/imx/imx6_anatopreg.h>
+#include <arm/freescale/imx/imx6_anatopvar.h>
+
+/*
+ * Hardware register defines.
+ */
+#define	PWD_REG				0x0000
+#define	CTRL_STATUS_REG			0x0030
+#define	CTRL_SET_REG			0x0034
+#define	CTRL_CLR_REG			0x0038
+#define	CTRL_TOGGLE_REG			0x003c
+#define	  CTRL_SFTRST			  (1 << 31)
+#define	  CTRL_CLKGATE			  (1 << 30)
+#define	  CTRL_ENUTMILEVEL3		  (1 << 15)
+#define	  CTRL_ENUTMILEVEL2		  (1 << 14)
+
+struct usbphy_softc {
+	device_t	dev;
+	struct resource	*mem_res;
+	u_int		phy_num;
+};
+
+static int
+usbphy_detach(device_t dev)
+{
+	struct usbphy_softc *sc;
+
+	sc = device_get_softc(dev);
+
+	if (sc->mem_res != NULL)
+		bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->mem_res);
+
+	return (0);
+}
+
+static int
+usbphy_attach(device_t dev)
+{
+	struct usbphy_softc *sc;
+	int err, regoff, rid;
+
+	sc = device_get_softc(dev);
+	err = 0;
+
+	/* Allocate bus_space resources. */
+	rid = 0;
+	sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
+	    RF_ACTIVE);
+	if (sc->mem_res == NULL) {
+		device_printf(dev, "Cannot allocate memory resources\n");
+		err = ENXIO;
+		goto out;
+	}
+
+	/*
+	 * XXX Totally lame way to get the unit number (but not quite as lame as
+	 * adding an ad-hoc property to the fdt data).  This works as long as
+	 * this driver is used for imx6 only.
+	 */
+	const uint32_t PWD_PHY1_REG_PHYSADDR = 0x020c9000;
+	if (BUS_SPACE_PHYSADDR(sc->mem_res, 0) == PWD_PHY1_REG_PHYSADDR) {
+		sc->phy_num = 0;
+		regoff = 0;
+	} else {
+		sc->phy_num = 1;
+		regoff = 0x60;
+	}
+
+	/*
+	 * Based on a note in the u-boot source code, disable charger detection
+	 * to avoid degrading the differential signaling on the DP line.  Note
+	 * that this disables (by design) both charger detection and contact
+	 * detection, because of the screwball mix of active-high and active-low
+	 * bits in this register.
+	 */
+	imx6_anatop_write_4(IMX6_ANALOG_USB1_CHRG_DETECT + regoff, 
+	    IMX6_ANALOG_USB_CHRG_DETECT_N_ENABLE | 
+	    IMX6_ANALOG_USB_CHRG_DETECT_N_CHK_CHRG);
+
+	imx6_anatop_write_4(IMX6_ANALOG_USB1_CHRG_DETECT + regoff, 
+	    IMX6_ANALOG_USB_CHRG_DETECT_N_ENABLE | 
+	    IMX6_ANALOG_USB_CHRG_DETECT_N_CHK_CHRG);
+
+	/* XXX Configure the overcurrent detection here. */
+
+	/*
+	 * Turn on the phy clocks.
+	 */
+	imx_ccm_usbphy_enable(dev);
+
+	/*
+	 * Set the software reset bit, then clear both it and the clock gate bit
+	 * to bring the device out of reset with the clock running.
+	 */
+	bus_write_4(sc->mem_res, CTRL_SET_REG, CTRL_SFTRST);
+	bus_write_4(sc->mem_res, CTRL_CLR_REG, CTRL_SFTRST | CTRL_CLKGATE);
+
+	/* Power up: clear all bits in the powerdown register. */
+	bus_write_4(sc->mem_res, PWD_REG, 0);
+
+	err = 0;
+
+out:
+
+	if (err != 0)
+		usbphy_detach(dev);
+
+	return (err);
+}
+
+static int
+usbphy_probe(device_t dev)
+{
+
+	if (ofw_bus_is_compatible(dev, "fsl,imx6q-usbphy") == 0)
+		return (ENXIO);
+
+	device_set_desc(dev, "Freescale i.MX6 USB PHY");
+
+	return (BUS_PROBE_DEFAULT);
+}
+
+static device_method_t usbphy_methods[] = {
+	/* Device interface */
+	DEVMETHOD(device_probe,  usbphy_probe),
+	DEVMETHOD(device_attach, usbphy_attach),
+	DEVMETHOD(device_detach, usbphy_detach),
+
+	DEVMETHOD_END
+};
+
+static driver_t usbphy_driver = {
+	"usbphy",
+	usbphy_methods,
+	sizeof(struct usbphy_softc)
+};
+
+static devclass_t usbphy_devclass;
+
+DRIVER_MODULE(usbphy, simplebus, usbphy_driver, usbphy_devclass, 0, 0);
+


More information about the svn-src-stable-10 mailing list