svn commit: r363531 - head/sys/dev/usb/net
John-Mark Gurney
jmg at FreeBSD.org
Sat Jul 25 18:09:05 UTC 2020
Author: jmg
Date: Sat Jul 25 18:09:04 2020
New Revision: 363531
URL: https://svnweb.freebsd.org/changeset/base/363531
Log:
clean up whitespace...
Modified:
head/sys/dev/usb/net/if_ure.c
head/sys/dev/usb/net/if_urereg.h
Modified: head/sys/dev/usb/net/if_ure.c
==============================================================================
--- head/sys/dev/usb/net/if_ure.c Sat Jul 25 17:22:45 2020 (r363530)
+++ head/sys/dev/usb/net/if_ure.c Sat Jul 25 18:09:04 2020 (r363531)
@@ -239,7 +239,7 @@ ure_read_1(struct ure_softc *sc, uint16_t reg, uint16_
shift = (reg & 3) << 3;
reg &= ~3;
-
+
ure_read_mem(sc, reg, index, &temp, 4);
val = UGETDW(temp);
val >>= shift;
@@ -385,7 +385,7 @@ ure_miibus_writereg(device_t dev, int phy, int reg, in
locked = mtx_owned(&sc->sc_mtx);
if (!locked)
URE_LOCK(sc);
-
+
ure_ocp_reg_write(sc, URE_OCP_BASE_MII + reg * 2, val);
if (!locked)
@@ -751,7 +751,7 @@ ure_init(struct usb_ether *ue)
ure_write_2(sc, URE_PLA_FMC, URE_MCU_TYPE_PLA,
ure_read_2(sc, URE_PLA_FMC, URE_MCU_TYPE_PLA) |
URE_FMC_FCR_MCU_EN);
-
+
/* Enable transmit and receive. */
ure_write_1(sc, URE_PLA_CR, URE_MCU_TYPE_PLA,
ure_read_1(sc, URE_PLA_CR, URE_MCU_TYPE_PLA) | URE_CR_RE |
@@ -975,7 +975,7 @@ ure_rtl8152_init(struct ure_softc *sc)
ure_read_2(sc, URE_USB_USB_CTRL, URE_MCU_TYPE_USB) |
URE_RX_AGG_DISABLE);
- /* Disable ALDPS. */
+ /* Disable ALDPS. */
ure_ocp_reg_write(sc, URE_OCP_ALDPS_CONFIG, URE_ENPDNPS | URE_LINKENA |
URE_DIS_SDSAVE);
uether_pause(&sc->sc_ue, hz / 50);
@@ -1005,7 +1005,7 @@ ure_rtl8153_init(struct ure_softc *sc)
ure_write_mem(sc, URE_USB_TOLERANCE,
URE_MCU_TYPE_USB | URE_BYTE_EN_SIX_BYTES, u1u2, sizeof(u1u2));
- for (i = 0; i < URE_TIMEOUT; i++) {
+ for (i = 0; i < URE_TIMEOUT; i++) {
if (ure_read_2(sc, URE_PLA_BOOT_CTRL, URE_MCU_TYPE_PLA) &
URE_AUTOLOAD_DONE)
break;
@@ -1015,7 +1015,7 @@ ure_rtl8153_init(struct ure_softc *sc)
device_printf(sc->sc_ue.ue_dev,
"timeout waiting for chip autoload\n");
- for (i = 0; i < URE_TIMEOUT; i++) {
+ for (i = 0; i < URE_TIMEOUT; i++) {
val = ure_ocp_reg_read(sc, URE_OCP_PHY_STATUS) &
URE_PHY_STAT_MASK;
if (val == URE_PHY_STAT_LAN_ON || val == URE_PHY_STAT_PWRDN)
@@ -1025,7 +1025,7 @@ ure_rtl8153_init(struct ure_softc *sc)
if (i == URE_TIMEOUT)
device_printf(sc->sc_ue.ue_dev,
"timeout waiting for phy to stabilize\n");
-
+
ure_write_2(sc, URE_USB_U2P3_CTRL, URE_MCU_TYPE_USB,
ure_read_2(sc, URE_USB_U2P3_CTRL, URE_MCU_TYPE_USB) &
~URE_U2P3_ENABLE);
@@ -1057,7 +1057,7 @@ ure_rtl8153_init(struct ure_softc *sc)
ure_write_1(sc, URE_USB_CSR_DUMMY2, URE_MCU_TYPE_USB,
ure_read_1(sc, URE_USB_CSR_DUMMY2, URE_MCU_TYPE_USB) |
URE_EP4_FULL_FC);
-
+
ure_write_2(sc, URE_USB_WDT11_CTRL, URE_MCU_TYPE_USB,
ure_read_2(sc, URE_USB_WDT11_CTRL, URE_MCU_TYPE_USB) &
~URE_TIMER11_EN);
@@ -1065,7 +1065,7 @@ ure_rtl8153_init(struct ure_softc *sc)
ure_write_2(sc, URE_PLA_LED_FEATURE, URE_MCU_TYPE_PLA,
ure_read_2(sc, URE_PLA_LED_FEATURE, URE_MCU_TYPE_PLA) &
~URE_LED_MODE_MASK);
-
+
if ((sc->sc_chip & URE_CHIP_VER_5C10) &&
usbd_get_speed(sc->sc_ue.ue_udev) != USB_SPEED_SUPER)
val = URE_LPM_TIMER_500MS;
@@ -1112,7 +1112,7 @@ ure_rtl8153_init(struct ure_softc *sc)
ure_write_2(sc, URE_USB_U2P3_CTRL, URE_MCU_TYPE_USB, val);
memset(u1u2, 0x00, sizeof(u1u2));
- ure_write_mem(sc, URE_USB_TOLERANCE,
+ ure_write_mem(sc, URE_USB_TOLERANCE,
URE_MCU_TYPE_USB | URE_BYTE_EN_SIX_BYTES, u1u2, sizeof(u1u2));
/* Disable ALDPS. */
@@ -1162,7 +1162,7 @@ ure_disable_teredo(struct ure_softc *sc)
{
ure_write_4(sc, URE_PLA_TEREDO_CFG, URE_MCU_TYPE_PLA,
- ure_read_4(sc, URE_PLA_TEREDO_CFG, URE_MCU_TYPE_PLA) &
+ ure_read_4(sc, URE_PLA_TEREDO_CFG, URE_MCU_TYPE_PLA) &
~(URE_TEREDO_SEL | URE_TEREDO_RS_EVENT_MASK | URE_OOB_TEREDO_EN));
ure_write_2(sc, URE_PLA_WDT6_CTRL, URE_MCU_TYPE_PLA,
URE_WDT6_SET_MODE);
@@ -1194,7 +1194,7 @@ ure_init_fifo(struct ure_softc *sc)
}
if (sc->sc_chip & URE_CHIP_VER_5C00) {
ure_ocp_reg_write(sc, URE_OCP_EEE_CFG,
- ure_ocp_reg_read(sc, URE_OCP_EEE_CFG) &
+ ure_ocp_reg_read(sc, URE_OCP_EEE_CFG) &
~URE_CTAP_SHORT_EN);
}
ure_ocp_reg_write(sc, URE_OCP_POWER_CFG,
Modified: head/sys/dev/usb/net/if_urereg.h
==============================================================================
--- head/sys/dev/usb/net/if_urereg.h Sat Jul 25 17:22:45 2020 (r363530)
+++ head/sys/dev/usb/net/if_urereg.h Sat Jul 25 18:09:04 2020 (r363531)
@@ -195,19 +195,19 @@
#define URE_CRWECR_CONFIG 0xc0
/* PLA_OOB_CTRL */
-#define URE_NOW_IS_OOB 0x80
-#define URE_TXFIFO_EMPTY 0x20
-#define URE_RXFIFO_EMPTY 0x10
-#define URE_LINK_LIST_READY 0x02
-#define URE_DIS_MCU_CLROOB 0x01
+#define URE_NOW_IS_OOB 0x80
+#define URE_TXFIFO_EMPTY 0x20
+#define URE_RXFIFO_EMPTY 0x10
+#define URE_LINK_LIST_READY 0x02
+#define URE_DIS_MCU_CLROOB 0x01
#define URE_FIFO_EMPTY (URE_TXFIFO_EMPTY | URE_RXFIFO_EMPTY)
/* PLA_MISC_1 */
-#define URE_RXDY_GATED_EN 0x0008
+#define URE_RXDY_GATED_EN 0x0008
/* PLA_SFF_STS_7 */
-#define URE_RE_INIT_LL 0x8000
-#define URE_MCU_BORW_EN 0x4000
+#define URE_RE_INIT_LL 0x8000
+#define URE_MCU_BORW_EN 0x4000
/* PLA_CPCR */
#define URE_CPCR_RX_VLAN 0x0040
@@ -344,14 +344,14 @@
#define URE_SEL_RXIDLE 0x0100
/* OCP_ALDPS_CONFIG */
-#define URE_ENPWRSAVE 0x8000
-#define URE_ENPDNPS 0x0200
-#define URE_LINKENA 0x0100
+#define URE_ENPWRSAVE 0x8000
+#define URE_ENPDNPS 0x0200
+#define URE_LINKENA 0x0100
#define URE_DIS_SDSAVE 0x0010
/* OCP_PHY_STATUS */
#define URE_PHY_STAT_MASK 0x0007
-#define URE_PHY_STAT_LAN_ON 3
+#define URE_PHY_STAT_LAN_ON 3
#define URE_PHY_STAT_PWRDN 5
/* OCP_POWER_CFG */
More information about the svn-src-head
mailing list